Emissions & CO2

Worldwide gas emissions and fuel consumption regulations (provided by: Ricardo Emleg)

WLTP (Worldwide Harmonized Light vehicles Test Procedures)

Worldwide Emission & Fuel Economy/CO2 Regulation Timeline (PC & LDT)

Emission Standards	Europe	EU	EU Countries	PC & LDT Update
			France	PC & LDT
		Non-EU	Switzerland	PC & LDT
			Norway	PC & LDT
			Turkey	General Update
	Americas	North America	USA	PC & LDT (Federal)
				PC & LDT (California State)
				Air Quality (California State)
			Canada	PC & LDT
		South America	Mexico	PC & LDT Update
			Brazil	PC & LDT
	Asia	East Asia	China	PC & LDT Update
				HDV
			Korea	PC & LDT
		South East Asia	Thailand	PC & LDT
			Indonesia	General
		South Asia	India	PC & LDT
	UN regulations			Table of amended regulations  by JASIC
Fuel Economy/ CO2	Europe	EU	EU	General
			France	PC & LDT
		Non-EU	Switzerland	PC & LDT
			Norway	PC & LDT
	Americas	North America	USA (CAFE, etc)	Federal Update
				California State
			Canada	General
	Asia	East Asia	China	General
		South East Asia	Thailand	PC & LDT
		South Asia	India	General
	UN regulations			Table of amended regulations by JASIC
Noise	UN regulations			Table of amended regulations by JASIC
Supplemental Information	Test cycles
	Vehicle Class Category (EU)
	Vehicle Class Category (US)

Latest Update

Date	Regulation	Region	Updated Summaries
March 17, 2017	Emission Standards	China PC & LDT	The China 6 standard was released on 23 December 2016 and type approval according this standard is implemented from this date. All new vehicles will have to comply with the requirements of Phase 6a from 1 July 2020.
March 9, 2017	Fuel Economy/ CO2	USA (Federal)	In January 2017 the EPA published the conclusions of a mid-term evaluation of the Phase 2 light-duty greenhouse gases standards and confirmed that the standards for model years 2022-2025 remain in place without changes.
February 24, 2017	Emission Standards	Turkey	1.Passenger cars and light duty trucks are required to meet Euro 6 standards with effect from 1 January 2016 for new type approvals. 2.As for Non-road Mobile Machinery Engine Emission, the implementation of Stage IIIB and Stage IV limits has been delayed. 3. 10ppm sulphur diesel and gasoline are reported to be available in Turkey.
February 20, 2017	Emission Standards	EU	Real driving emissions (RDE) standards have been developed and will be implemented from 1 September 2017.
February 9, 2017	Emission Standards	Mexico	The applicability of emergency limits of pollutants to all in-use vehicles in Mexico City and the several states was extended for further six months, starting on 1 January 2017, with an extension notice dated 21 December 2016.
February 7, 2017	Fuel Economy/ CO2	USA (Federal)	Phase 2 standards for heavy duty vehicles were published in October 2016; their phase-in will start with model year 2018 or 2021, depending on the type of vehicle, and the final standards will apply from model year 2027
November 30, 2016	Emission Standards	India	Bharat Stage VI emissions standards have been published and will apply to all vehicles manufactured from 1 April 2020.
October 28, 2016	Emission Standards	Mexico	1.The information of in-use limits and test procedures for gasoline vehicles was updated. 2. On 7 June 2016 the emergency official standard was published, which contains limits for pollutants and applies from 1 July 2016 for six months to all in-use vehicles in Mexico City and the several states.
October 20, 2016	Emission Standards	EU	1. New real driving emissions (RDE) standards have been developed and will be implemented from 1 September 2017. 2. The draft implementing act to introduce new WLTP test for CO2 and fuel consumption test will be sent to the European Parliament and Council shortly for scrutiny. If the current text is endorsed, the new WLTP test will be mandatory for all new vehicle types from September 2017 and for all new vehicles from September 2018.
September 20, 2016	Emission Standards	China PC & LDT	A draft China 6 regulation has been issued; type approval according to this standard will be required from 1 January 2019.
September 12, 2016	WLTP	World	1. In November 2013, the first version of WLTP was completed with some imperfectness regarding the test procedures for EV/HEV and the measurement of additional pollutants so on. 2. In order to develop remaining test procedures, WLTP phase 1b activities were carried out from 2014 to 2016 to settle the remaining tasks of phase 1a and subsequently WLTP1b was approved in March 2016. 3. In June 2016, WLTP Phase 2 (including remaining issues of Phase 1b) development activities from 2016 to 2018 was approved and started.
August 20, 2016	Fuel Economy/ CO2	China	On 31 December 2015, a new national standard on fuel consumption for category N1 vehicles and M2 vehicles was published and will be implemented from 1 January 2018.
July 19, 2016	Fuel Economy/ CO2	EU	1) A second phase of the passenger car legislation, with a 95 g/km target, phased in 2020. 2) In April 2016 the European Commission indicated that proposals for the post-2020 CO2 targets for passenger cars and LCVs were expected to be presented in 2017. 3) In April 2016 the European Commission presented a proposal on the monitoring and reporting of CO2 emissions from heavy-duty vehicles starting from 2017.
June 23, 2016	Emission Standards	Brazil	1) In May of 2016, Chamber of Deputies has proposed a law to allow the sale of diesel fuel for passenger cars, thereby opening up the diesel passenger car market. 2) In February 2013 IBAMA published its regulatory instruction No 5 which defined new OBD Br-D standards for light duty diesel vehicles (up to 3,856 kg GVW) which are effective from 1 January 2015.
April 13, 2016	Fuel Economy/ CO2	Canada	1) For light duty vehicle greenhouse gas emissions, revised legislation will be effective from the 2017 model yea. 2) New standards are planned for the 2018 model year onwards, which will also be generally aligned with those of the United States.
April 7, 2016	Emission Standards	Indonesia	In August 2015, it was reported that the state owned Petrol company (Pertamina) was reluctant to adopt Euro4 and Euro IV standards.

UN Regulations

• Trends on Harmonization of Vehicle Standards at UN
• UN Regulations Adoption Status
• Conference Schedule
• How to access to Working Documents of UN regulations

Amended Regulations in the past

• Year of 2017 : Jan. Feb. Mar.   
• Year of 2016 : Jan. Feb. Mar. Apr. May Jun.Jul. Aug. Sep. Oct. Nov. Dec.
• Year of 2015 : Jan. Feb. Mar. Apr. May Jun. Jul. Aug. Sep. Oct. Nov. Dec.
• Year of 2014 : Jan.Feb.Mar.Apr.MayJun. Jul.Aug. Sep.Oct. Nov. Dec.
• Year of 2013 : Jan.Feb.Mar.Apr.MayJun.Jul.Aug.Sep.Oct.Nov. Dec.
• Year of 2012 : Jan.Feb.Mar.Apr.MayJun.Jul.Aug.Sep.Oct.Nov.Dec.
• Year of 2011 : Jan.Feb.Mar.Apr.MayJun.Jul.Aug.Sep.Oct.Nov.Dec.

Amended regulations (Provided by: JASIC)

Table of amended regulations (Mar. 2017)

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Agreement regarding  UN/ECE regulation	135	01	S1	2015/71	2017/1/26	2016/8/25	Pole side impact	Understanding of N1 category shall be clarified.

PAGETOP

---

Table of amended regulations (Feb. 2017)

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Agreement regarding UN/ECE regulation	55	01	S5	2016/5	2016/10/28	2016/10/8	Mechanical coupling	A new class of coupling device shall be added.
2	Agreement regarding UN/ECE regulation	128	00	S5	2016/25	2016/10/28	2016/10/8	LED	5 sorts of replaceable LED light sources shall be added.

PAGETOP

---

Table of amended regulations (Jan. 2017)

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Agreement regarding UN/ECE regulation	10	05	S1	2016/16	2016/10/28	2016/10/8	Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility	According to the revision of R46, the mirror may be replaced with a camera.
2	Agreement regarding UN/ECE regulation	34	03	S1	2016/8	2016/10/28	2016/10/8	Prevention of fire risks	For the rear collision test, in which a pendulum is used, the pendulum velocity shall be changed.
3	Agreement regarding UN/ECE regulation	41	04	S4	2016/3	2016/10/28	2016/10/8	Noise (motor cycle)	Understanding of the regulation text shall be clarified.
4	Agreement regarding UN/ECE regulation	46	04	S3	2016/9	2016/10/28	2016/10/8	Rear-view mirrors	Including Class II and III mirrors, surveillance mirrors which are fully integrated with a lamp housing, may be mounted at a height less than, or equal to, 2 meters from the ground.
5	Agreement regarding UN/ECE regulation	48	06	S7	2016/18	2016/10/28	2016/10/8	Installation of lights	-LED light sources with a luminous intensity exceeding 2000 lumens shall be provided with an auto-levelling device. -A requirement shall be added to the end outline marker that this shall be visible within the fields of vision of the rear-view devices for indirect vision.
6	Agreement regarding UN/ECE regulation	50	00	S18	2016/21	2016/10/28	2016/10/8	Lights (moped, motor cycle)	Direction indicators may be activated sequentially.
7	Agreement regarding UN/ECE regulation	51	03	S1	2016/4	2016/10/28	2016/10/8	Noise	With regard to the urban driving test, understanding of the test results shall be corrected.
8	Agreement regarding UN/ECE regulation	53	01	S18	2016/22	2016/10/28	2016/10/8	Installation of lights (motor cycle)	Emergency stop signals as well as sequential activation of the direction indicator shall be admitted.
			02		2016/23	2016/10/28	2016/10/8		-Use of Class B in R113 shall be prohibited. -LED light sources may be used for Classes A and B. -Adjustment of test requirements for the drift of cut off line under heat influence with R112..
9	Agreement regarding UN/ECE regulation	83	07	S2	2016/28	2016/10/28	2016/10/8	The emission of pollutants according to engine fuel requirements	Regarding the test of OBD, allowable total number of the simulated failures shall additionally be prescribed.
10	Agreement regarding UN/ECE regulation	107	07		2016/12	2016/10/28	2016/10/8	Category M2 or M3 vehicles with regard to their general construction	A revision to mandate equipment of Class I and II vehicles with fire suppression system.
11	Agreement regarding UN/ECE regulation	110	02		2016/13	2016/10/28	2016/10/8	Vehicles using CNG/LNG	-Provisions regarding the marking of tanks shall be revised. -CNG-1, CNG-2 and CNG-3 containers of welded construction shall not be permitted. Accordingly, relevant test methods and standards shall be deleted. -In case of vehicles where the container(s) is (are) fitted outside the vehicle and on the roof or top of the bodywork of the vehicle, the manner how to fit the pressure relief device (temperature triggered) to the fuel container(s) regarding discharge direction shall be noted.
12	Agreement regarding UN/ECE regulation	118	02	S2	2016/14	2016/10/28	2016/10/8	The burning behaviour of materials used in the construction of certain categories of motor vehicles	Correction of the Scope and the Specifications.
13	Agreement regarding UN/ECE regulation	125	01	S1	2016/15	2016/10/28	2016/10/8	The forward field of vision	Addition of a rule that the CMS used in place of a mirror shall not be regarded as an obstruction.
14	Agreement regarding UN/ECE regulation	130	00	S1	2016/6	2016/10/28	2016/10/8	Lane departure warning systems (LDWS)	-Addition of an exemption rule. -Addition of naming reference series quoted from R10.
15	Agreement regarding UN/ECE regulation	131	01	S2	2016/7	2016/10/28	2016/10/8	Advanced emergency braking systems (AEBS)	-Addition of an exemption rule. -Addition of naming reference series quoted from R10.

PAGETOP

---

Table of amended regulations (Dec. 2016)

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Agreement regarding UN/ECE regulation	138	00		2016/26	2016/10/24	2016/10/5	Quiet Road Transport Vehicles	A new regulation regarding equipment of quiet road transport vehicles such as electric vehicles, hybrid electric vehicles, etc. with devices to make pedestrians aware of those vehicles approaching.

PAGETOP

Table of amended regulations (Nov. 2016)

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Adopted proposal regarding UN/ECE regulation	54	00	S21	2016/52	2016/6/22		Pneumatic tyres (commercial vehicle)	-The definition of terms regarding type approval shall be changed. -Error correction. -It shall be clarified how to round fractions when calculating tyre dimentions. -The inscription M+S or M.S or M&S may be allowed for tyres classified in the category of use "special use tyre". -The unit shall be changed. -The sizes of "high flotation tyres" shall additionally be added. -The unit of the drum speed in the endurance drum test shall be changed.
2	Adopted proposal regarding UN/ECE regulation	64	03		2016/54	2016/6/22		Temporary spare tyres	According to the realization of the new regulation on TPMS(Tyre Pressure Monitoring Systems), the requirements for TPMS shall be deleted.
3	Agreement regarding UN/ECE regulation	85	R1	C1		2016/9/22		Measurement of engine power	Error correction.
4	Adopted proposal regarding UN/ECE regulation	90	02	S3	2016/58	2016/6/22		Replacement brake lining assemblies	-Addition of rules on brake discs of L category based upon R78. -The approval number shall clearly be named. -Error correction. -Units shall be renamed according to the SI unit system.
5	Adopted proposal regarding UN/ECE regulation	129	01		2016/38	2016/6/22		Enhanced child restraint systems (ECRS)	-In accordance with the title, all the terms "CRS" shall be replaced with "ECRS". -Addition of definition. -Q10 dummy shall be added to list of dummies used for measuring injury criteria. -Addition of some test methods,

PAGETOP

---

Table of amended regulations (Oct. 2016)

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Adopted proposal regarding UN/ECE regulation	9	07	S2	2016/45	2016/6/22		Noise (Three-wheeled Vehicles)	Correction of requirements for silencers containing fibrous absorbent material.
2	Adopted proposal regarding UN/ECE regulation	11	03	S4	2016/33	2016/6/22		Door latches and hinges	Addition of requirements which allow choice of specifications of back door latch release control.
			04	S1	2016/34	2016/6/22			Addition of requirements which allow choice of specifications of back door latch release control.
3	Adopted proposal regarding UN/ECE regulation	13	11	S14	2016/49	2016/6/22		Braking (categories M, N and O)	Revision of testing requirements for vehicles equipped with inertia braking system.
4	Adopted proposal regarding UN/ECE regulation	13H	01		2016/50	2016/6/22		Braking (M1)	Amendment to put ESC and BAS aside, so that this regulation applies to the braking only.
5	Adopted proposal regarding UN/ECE regulation	14	07	S7	2016/35	2016/6/22		Safety belt anchorages	Addition of a provision that the flexible shoulder adjustment device for height not directly attached to the body construction nor seat construction shall be used as a restraint system.
6	Adopted proposal regarding UN/ECE regulation	30	02	S18	2016/51	2016/6/22		Pneumatic tyres (passenger vehicle)	-Correction of the definition of terms related to application for type approval. -Addition of a list showing values of nominal rim diameters for code-designated rims expressed in millimetres -Addition of explanation how to round fractions when calculating tyre dimensions. -Correction of description related to high speed test.
7	Adopted proposal regarding UN/ECE regulation	41	04	S5	2016/46	2016/6/22		Noise (motor cycle)	Correction of requirements for silencers containing fibrous absorbent material.
8	Agreement regarding UN/ECE regulation	46	04	S2	2015/84	2016/7/11	2016/6/18	Rear-view mirrors	-The scope shall be revised. -Camera-monitor system shall be added.
9	Adopted proposal regarding UN/ECE regulation	49	05	S8	2016/40	2016/6/22		Emissions of compression ignition and positive ignition engines	-A proposal for simplifying calibration procedure for measurement device.
			06	S4	2016/41	2016/6/22			-A proposal for simplifying calibration procedure for measurement device. -As an additional alternative, the fuel injection malfunction diagnosis in GTR5 may be opted for. -The Type Approval Authority shall require that the manufacturer provides a documentation package describing design and emission control strategy of the engine system, etc.
10	Adopted proposal regarding UN/ECE regulation	55	01	S6	2016/53	2016/6/22		Mechanical coupling	Generally, the coupling ball and the towing bracket shall not (partly) obscure, within the planes of geometrical visibility, any lighting component (e.g. rear fog lamp) or the space for mounting and fixing of the rear registration plate of the towing vehicle.
11	Adopted proposal regarding UN/ECE regulation	60	00	S5	2016/27	2016/6/22		Driver operated controls(Moped, motor cycle)	-Regarding the symbols, trivial irregularities such as those of line thickness, etc., shall be accepted. -Each symbol used for identification of a tell-tale, control or indicator need not be coloured, provided that it stands out clearly against the background.
12	Adopted proposal regarding UN/ECE regulation	63	02	S2	2016/47	2016/6/22		Noise (Moped)	Correction of requirements for silencers containing fibrous absorbent material.
13	Adopted proposal regarding UN/ECE regulation	75	00	S16	2016/55	2016/6/22		Pneumatic tyres (L-category vehicles)	Addition of explanation how to round fractions when calculating tyre dimensions.
14	Adopted proposal regarding UN/ECE regulation	78	03	S3	2016/56	2016/6/22		Braking (category L)	-Extension of target categories. -"Refer to R10" shall additionally be prescribed. -Requirements for ESS（Emergency stop signal) shall be added.
15	Adopted proposal regarding UN/ECE regulation	79	01	S5	2016/57	2016/6/22		Steering equipment	-Application extent shall be revised, -Definition of terms shall be corrected. -Restriction on introducing electric steering device for trailers shall be abolished.
16	Adopted proposal regarding UN/ECE regulation	83	06	S7	2016/42	2016/6/22		The emission of pollutants according to engine fuel requirements	The measurement method of total resistance shall be revised.
			07	S3	2016/43	2016/6/22			The measurement method of total resistance shall be revised.
	Agreement regarding UN/ECE regulation		06	S6	2015/101	2016/7/11	2016/6/18		The unit of the road load coefficient in 06 series shall be changed,
17	Adopted proposal regarding UN/ECE regulation	92	01	S1	2016/48	2016/6/22		Replacement silencing system(Motor cycle)	Correction of requirements for silencers containing fibrous absorbent material.
18	Adopted proposal regarding UN/ECE regulation	113	01	S6	2016/74	2016/6/22		Headlamps (with a symmetrical passing beam)	-Addition of a description that use of Class B LED for the principal passing-beam shall be permitted. -Error correction.
19	Adopted proposal regarding UN/ECE regulation	115	00	S7	2016/44	2016/6/22		LPG/CNG retrofit system	Simplification of approval document.
20	Adopted proposal regarding UN/ECE regulation	117	02	S9	2016/60	2016/6/22		The approval of tyres with regard to rolling sound emissions	-Correction of the definition of terms related to the type approval. -Correction of description regarding the tyre inflation pressure.
21	Adopted proposal regarding UN/ECE regulation	134	00	S2	2016/39	2016/6/22		Hydrogen and fuel cell vehicles	Error correction.

PAGETOP

---

Table of amended regulations (Sep. 2016)

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Agreement regarding UN/ECE regulation	16	06	S6	2015/93	2016/7/11	2016/6/18	Safety belts	Clarification of detailed rules regarding the buckle warning light for case the seat is occupied.
	Adopted proposal regarding UN/ECE regulation		06	S7	2016/36	2016/6/22			Provisions regarding the flexible shoulder adjustment devices for height shall be clarified.
2	Agreement regarding UN/ECE regulation	39	01		2015/83	2016/7/11	2016/6/18	Speedometer and odometer	Addition of requirements for odometer.
3	Agreement regarding UN/ECE regulation	44	04	S10	2015/94	2016/7/11	2016/6/18	Child restraint systems	-Addition of definition. -Correction regarding colours of labels. -Clarification regarding test method. -Clarification regarding the judgement for the dynamic test.
	Adopted proposal regarding UN/ECE regulation		04	S11	2016/37	2016/6/22			-The definition of the guide strap shall be corrected. -Addition of provisions that a certain label shall be made visible, in case a booster cushion without backrest shall be installed. -Booster cushion without backrest shall only be type approved as Child Restraint Systems of Group III.
4	Agreement regarding UN/ECE regulation	58	03		2015/85	2016/7/11	2016/6/18	Rear underrun protection	According to the intensification of the load test, the test method shall be changed.
5	Agreement regarding UN/ECE regulation	85	00	S7	2015/102	2016/7/11	2016/6/18	Measurement of engine power	Adjustment with EU Directive.
6	Agreement regarding UN/ECE regulation	94	02	S6	2015/95	2016/7/11	2016/6/18	Protection of the occupants in the event of a frontal collision	-Through all text of the Regulation, "Rechargeable Energy Storage System (REESS)" shall be amended to read: "Rechargeable Electrical Energy Storage System (REESS)". -The "rear-view mirrors" referred to in the definition of vehicle width shall be amended to read "external devices for indirect vision".
	Agreement regarding UN/ECE regulation		03		2015/96	2016/7/11	2016/6/18		-The threshold value for the thorax compression criterion (ThCC) shall be changed. -Addition of a rule to restrain the dummy with the safety belt. -Adjustment with the regulation for frontal collision (R137).
7	Agreement regarding UN/ECE regulation	99	00	S11	2015/81	2016/7/11	2016/6/18	Gas-discharge light sources	New gas discharge light sources shall be added.
8	Agreement regarding UN/ECE regulation	107	06	S4	2015/88	2016/7/11	2016/6/18	Category m2 or m3 vehicles with regard to their general construction	Vehicles of Class III shall be equipped with automatic fire suppressing systems..
9	Agreement regarding UN/ECE regulation	127	02		2015/99	2016/7/11	2016/6/18	Pedestrian safety	The leg test area shall properly be defined.
10	Agreement regarding UN/ECE regulation	137	00		2015/105	2016/6/22	2016/6/9	Frontal impact with focus on restraint systems	A new regulation regarding frontal collision.

PAGETOP

---

Table of amended regulations (Aug. 2016)

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Agreement regarding UN/ECE regulation	12	04	S4	2015/92	2016/7/11	2016/6/18	Steering mechanism	Through all text of the Regulation, "Rechargeable Energy Storage System (REESS)" shall be amended to read: "Rechargeable Electrical Energy Storage System (REESS)".
2	Agreement regarding UN/ECE regulation	26	03	S3	2015/82	2016/7/11	2016/6/18	External projections	The words "exterior rear-view mirrors" in the scope shall be replaced with "exterior devices for indirect vision".
3	Agreement regarding UN/ECE regulation	61	00	S3	2015/86	2016/7/11	2016/6/18	External projections(Commercial vehicle)	A revision to exempt devices for indirect vision from application of provisions.
4	Agreement regarding UN/ECE regulation	74	01	S9	2015/79	2016/7/11	2016/6/18	Installation of lights (Moped)	Error correction.
5	Agreement regarding UN/ECE regulation	95	03	S6	2015/97	2016/7/11	2016/6/18	Protection of the occupants in the event of a lateral collision	Through all text of the Regulation, "Rechargeable Energy Storage System (REESS)" shall be amended to read: "Rechargeable Electrical Energy Storage System (REESS)".
6	Agreement regarding UN/ECE regulation	97	01	S8	2015/87	2016/7/11	2016/6/18	Vehicle alarm systems	Addition of a stipulation that any optical signal or any use of lighting and light-signalling devices outside the passenger compartment providing information on the status of VAS (set, unset, alarm setting period, alarm has been activated) shall fulfil the requirements of R48.
7	Agreement regarding UN/ECE regulation	98	01	S7	2015/80	2016/7/11	2016/6/18	Gas-discharge headlamps	Clarification of approval procedure according to addition of new gas-discharge light sources.
8	Agreement regarding UN/ECE regulation	100	02	S3	2015/98	2016/7/11	2016/6/18	Electric power train	Clarification of approval procedure according to addition of new gas-discharge light sources.
9	Agreement regarding UN/ECE regulation	101	01	S6	2015/103	2016/7/11	2016/6/18	Emission of carbon dioxide and fuel consumption (Passenger car)	In accordance with R83, the requirements for tyre selection shall be changed.
10	Agreement regarding UN/ECE regulation	110	01	S4	2015/89	2016/7/11	2016/6/18	Vehicles using CNG/LNG	Addition of components regarding LNG system.
11	Agreement regarding UN/ECE regulation	113	01	S2/C1		2016/4/29		Headlamps (with a symmetrical passing beam)	Error correction.
12	Agreement regarding UN/ECE regulation	116	00	S5	2015/91	2016/7/11	2016/6/18	Protection against unauthorized use	Addition of a stipulation that any optical signal or any use of lighting and light-signalling devices outside the passenger compartment providing information on the status of VAS (set, unset, alarm setting period, alarm has been activated) shall fulfil the requirements of R48.

PAGETOP

---

Table of amended regulations (Jul. 2016)

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Adopted proposal regarding UN/ECE regulation	51	03	S1	2016/4	2016/3/9		Noise	With regard to the urban driving test, understanding of the test results shall be revised.
2	Adopted proposal regarding UN/ECE regulation	53	01	S18	2016/22	2016/3/9		Installation of lights (motor cycle)	Sequential activation of the direction indicator as well as the emergency stop signal shall be admitted.
			02		2016/23	2016/3/9			-Use of Class B in R113 shall be prohibited. -LED light sources may be used for Classes A and B. -Adjustment of test requirements for the drift of cut off line under heat influence with R112..
3	Adopted proposal regarding UN/ECE regulation	55	01	S5	2016/5	2016/3/9		Mechanical coupling	Anew class of coupling device shall be added.
	Adopted proposal regarding UN/ECE regulation	83	07	S2	2016/28	2016/3/9		The emission of pollutants according to engine fuel requirements	Regarding the test of OBD, allowable total number of the simulated failures shall be added.
5	Adopted proposal regarding UN/ECE regulation	107	05	S5	2016/10	2016/3/9		Category M2 or M3 vehicles with regard to their general construction	-The provision to exclude folded seat from the field of vision from driver's seat to rear view mirror shall be applied to the monitor used as a device for indirect vision. -Accommodation capacity of baby cars shall remain "Reserved".
			06	S5	2016/11	2016/3/9			-The provision to exclude folded seat from the field of vision from driver's seat to rear view mirror shall be applied to the monitor used as a device for indirect vision. -Error correction regarding the requirements for the fire alarm device.
			07		2016/12	2016/3/9			A revision to mandate equipment of Class I and II vehicles with fire suppression system.
6	Adopted proposal regarding UN/ECE regulation	110	02		2016/13	2016/3/9		Vehicles using CNG/LNG	-Provisions regarding the marking of tanks shall be revised. -CNG-1, CNG-2 and CNG-3 containers of welded construction shall not be permitted. Accordingly, relevant ｔｅｓｔ methods and standards shall be deleted. -In case of vehicles where the container(s) is (are) fitted outside the vehicle and on the roof or top of the bodywork of the vehicle, the manner how to fit the pressure relief device (temperature triggered) to the fuel container(s) regarding discharge direction shall be noted.
7	Adopted proposal regarding UN/ECE regulation	118	02	S2	2016/14	2016/3/9		The burning behaviour of materials used in the construction of certain categories of motor vehicles	Correction of the Scope and the Specifications.
8	Adopted proposal regarding UN/ECE regulation	125	01	S1	2016/15	2016/3/9		The forward field of vision	Addition of a rule that, the CMS used in place of a mirror shall not be regarded as an obstruction.
9	Adopted proposal regarding UN/ECE regulation	128	00	S5	2016/25	2016/3/9		LED	Addition of 5 items of replaceable LED light sources.
10	Adopted proposal regarding UN/ECE regulation	130	00	S1	2016/6	2016/3/9		Lane departure warning systems (LDWS)	-Addition of an exemption rule. -Addition of reference series quoted from R10.
11	Adopted proposal regarding UN/ECE regulation	131	01	S2	2016/7	2016/3/9		Advanced emergency braking systems (AEBS)	-Addition of an exemption rule. -Addition of reference series quoted from R10.

PAGETOP

---

Table of amended regulations (Jun. 2016)

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Adopted proposal regarding UN/ECE regulation	10	05	S1	2016/16	2016/3/9		Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility	According to the revision of R46, the mirror may be replaced with a camera.
			04	S3	2016/17	2016/3/9			According to the revision of R46, the mirror may be replaced with a camera.
2	Adopted proposal regarding UN/ECE regulation	34	03	S1	2016/8	2016/3/9		Prevention of fire risks	Amendment regarding the velocity of a pendulum, in case this is applied for. Ｔhe rear end collision test.
3	Adopted proposal regarding UN/ECE regulation	41	04	S4	2016/3	2016/3/9		Noise (motor cycle)	Understanding of the regulation text shall be clarified..
4	Adopted proposal regarding UN/ECE regulation	46	04	S3	2016/9	2016/3/9		Rear-view mirrors	Including. Class II and III mirrors, surveillance mirrors which are fully integrated with a lamp housing, may be mounted at a height less than, or equal to, 2 meters from the ground.
5	Adopted proposal regarding UN/ECE regulation	48	06	S7	2016/18	2016/3/9		Installation of lights	-LED light sources with a luminous intensity exceeding 2000 lumens shall be provided with an auto-levelling device. -A requirement shall be added to the end outline marker that this shall be visible within the fields of vision of the rear-view devices for indirect vision.
			05	S9	2016/19	2016/3/9			-LED light sources with a luminous intensity exceeding 2000 lumens shall be provided with an auto-levelling device. -A requirement shall be added to the end outline marker that this shall be visible within the fields of vision of the rear-view devices for indirect vision.
			04	S16	2016/20	2016/3/9			LED light sources with a luminous intensity exceeding 2000 lumens shall be provided with an auto-levelling device.
6	Adopted proposal regarding UN/ECE regulation	50	00	S18	2016/21	2016/3/9		Lights (moped, motor cycle)	Direction indicators may be activated sequentially.
7	Agreement regardingUN/ECE regulation	135	00	S1	2015/54	2016/2/5	2016/1/29	Pole side impact	The test vehicle speed shall be changed.
			01		2014/80	2016/2/5	2016/1/20		Understanding of N1 category shall be clarified.

PAGETOP

---

Table of amended regulations (May 2016)

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Agreement regarding UN/ECE regulation	49	06	S3	2015/55	2016/2/5	2016/1/20	Emissions of compression ignition and positive ignition engines	According to the revision of EU regulation, relevant items such as those of OBD, etc. shall be revised.
2	Agreement regarding UN/ECE regulation	51	03		2015/62	2016/2/5	2016/1/20	Noise	-Introduction of noise emission measurement methods during city driving as well as those methods related to ASEP. -Regulation value(s) shall be strengthened.
3	Agreement regarding UN/ECE regulation	83	06	S5	2015/56	2016/2/5	2016/1/20	The emission of pollutants according to engine fuel requirements	-A revision to enable application of the fuel approved according to E10/B7 for 06 series. -Annex11 shall be revised for consideration of requirements in 07 series.
4	Agreement regarding UN/ECE regulation	83	07	S1	2015/57	2016/2/5	2016/1/20	The emission of pollutants according to engine fuel requirements	The requirements for OBD in 07 series shall be revised.
5	Agreement regarding UN/ECE regulation	109	00	S7	2015/67	2016/2/5	2016/1/20	Retreaded pneumatic tyre （commercial vehicle）	Consideration of requirements regarding snow tyres for use in severe snow conditions of R117.
6	Agreement regarding UN/ECE regulation	136	00		2015/69	2016/2/5	2016/1/20	Electric power train (category L)	A new regulation regarding motor cycles (vehicles of category L) with electric propulsion and their battery.

PAGETOP

---

Table of amended regulations (Apr. 2016)

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Agreement regarding UN/ECE regulation	9	07	S1	2015/59	2016/2/5	2016/1/20	Noise (Three-wheeled Vehicles)	Addition of a new ISO regulation regarding the road surface.
2	Agreement regarding UN/ECE regulation	14	07	S6	2015/46	2016/2/5	2016/1/20	Safety belt anchorages	Clarification of understanding of the specifications required for ISOFIX regarding convertible vehicles and vehicles with more than one seat row.
3	Agreement regarding UN/ECE regulation	17	08	S3	2015/47	2016/2/5	2016/1/20	Seats	-Error correction. -Rearrangement of transitional regulations. -Revision of the test procedure for devices intended to protect the occupants against displacement of luggage
4	Agreement regarding UN/ECE regulation	28	00	S4	2015/60	2016/2/5	2016/1/20	Audible warning devices	Revision of the test procedure as well as the lower limit value for judgment.
5	Agreement regarding UN/ECE regulation	29	03	S3	2015/48	2016/2/5	2016/1/20	Cab of commercial vehicles	Clarification regarding the test evaluation and the measuring rim code.
6	Agreement regarding UN/ECE regulation	41	04	S3	2015/61	2016/2/5	2016/1/20	Noise (motor cycle)	Addition of a new ISO regulation regarding road surface.
7	Agreement regarding UN/ECE regulation	54	00	S20	2015/66	2016/2/5	2016/1/20	Pneumatic tyres(commercial vehicle)	-The explanation about the marking location of "LT" shall be corrected. -Sizes of the high floatation tyres shall be added.
8	Agreement regarding UN/ECE regulation	59	02	S1	2015/63	2016/2/5	2016/1/20	Replacement silencing system	Definition of the silencing system, etc., shall be adjusted with EU regulation.
9	Agreement regarding UN/ECE regulation	63	02	S1	2015/64	2016/2/5	2016/1/20	Noise (moped)	Addition of a new ISO regulation regarding road surface.
10	Agreement regarding UN/ECE regulation	80	03	S1	2015/49	2016/2/5	2016/1/20	Seat(large passenger vehicle)	- Installation of side-facing seats in vehicles of M3 category shall be prohibited. -Correction of transitional regulations.
11	Agreement regarding UN/ECE regulation	95	03	S5	2015/50	2016/2/5	2016/1/20	Protection of the occupants in the event of a lateral collision	Deletion of Appendix 3 regarding the characteristics of the movable deformable barrier.
12	Agreement regarding UN/ECE regulation	100	01	S4	2015/51	2016/2/5	2016/1/29	Electric power train	-Protection against electrical shock: Protection requirements against direct contact with connectors. -Clarification of provisions against direct contact with high voltage power supplies.
			02	S2	2015/52	2016/2/5	2016/1/29		-Protection against electrical shock: Protection requirements against direct contact with connectors. -Clarification of provisions against direct contact with high voltage power supplies.

PAGETOP

---

Table of amended regulations (Mar. 2016)

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Agreement regarding UN/ECE regulation	37	03	S44	2015/18	2015/11/9	2015/10/8	Filament lamps	-The definition of the filament of bulb shall be clarified. -New halogen bulbs shall be adopted. -Error correction.
2	Adopted proposal regarding UN/ECE regulation	46	04	S2	2015/84	2015/11/11		Rear-view mirrors	-The scope shall be revised. -Camera-monitor system shall be added.
3	Adopted proposal regarding UN/ECE regulation	61	00	S3	2015/86	2015/11/11		External projections (commercial vehicle)	A revision to exempt devices for indirect vision from application of provisions.
4	Adopted proposal regarding UN/ECE regulation	74	01	S8/C1	2015/79	2015/11/11		Installation of lights (moped)	-Error correction.
5	Adopted proposal regarding UN/ECE regulation	83	05	S11	2015/100	2015/11/11		The emission of pollutants according to engine fuel requirements	The unit of the road load coefficient in 05 series shall be changed,
			06	S6	2015/101	2015/11/11			The unit of the road load coefficient in 06 series shall be changed,
6	Adopted proposal regarding UN/ECE regulation	85	00	S7	2015/102	2015/11/11		Measurement of engine power	Harmonization with the EU Directive.
7	Adopted proposal regarding UN/ECE regulation	99	00	S11	2015/81	2015/11/11		Gas-discharge light sources	New gas discharge light sources shall be added.
8	Adopted proposal regarding UN/ECE regulation	101	01	S6	2015/103	2015/11/11		Emission of carbon dioxide and fuel consumption (passenger car)	The requirements for tyre selection shall be revised in accordance with R83.
9	Agreement regarding UN/ECE regulation	107	06	S2	2014/77	2015/11/9	2015/10/8	Category M2 or M3 vehicles with regard to their general construction	Loading requirements shall be revised.
			06	S3	2015/44	2015/11/9	2015/10/8		The driver shall be provided with a device to alarm him/her in case the compartment temperature increases excessively. Besides, requirements for activating the hazard lamp shall also be added, in order to warn the other road-users of the danger.
	Adopted proposal regarding UN/ECE regulation		05	S4	2015/104	2015/11/11			According to the revision of R46, the requirements for the layout inside the vehicle shall be changed.
			06	S4	2015/88	2015/11/11			Vehicles of Class III shall be equipped with automatic fire suppressing systems.

PAGETOP

---

Table of amended regulations (Feb. 2016)

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Adopted proposal regarding UN/ECE regulation	12	04	S4	2015/92	2015/11/11		Steering Mechanism	Through all text of the Regulation, "Rechargeable Energy Storage System (REESS)" shall be amended to read: "Rechargeable Electrical Energy Storage System (REESS)".
2	Adopted proposal regarding UN/ECE regulation	16	06	S6	2015/93	2015/11/11		Safety Belts	Clarification of meaning regarding the buckle warning light when the seat is occupied.
3	Adopted proposal regarding UN/ECE regulation	26	03	S3	2015/82	2015/11/11		External Projections	The words "exterior rear-view mirrors" in the scope shall be replaced with "exterior devices for indirect vision".
4	Adopted proposal regarding UN/ECE regulation	39	01		2015/83	2015/11/11		Speedometer	Addition of requirements for odometer.
5	Agreement regarding UN/ECE regulation	43	01	S4	2015/11	2015/11/9	2015/10/8	Safety Glazing Materials	Addition of requirements regarding laminated rigid plastic windscreens and .laminated rigid plastic panes other than windscreens.
6	Adopted proposal regarding UN/ECE regulation	44	04	S10	2015/94	2015/11/11		Child Restraint Systems	-Addition of definition. -Correction regarding the colour of label. -Clarification of the test method. -Clarification of judgment requirements for crash test.
7	Agreement regarding UN/ECE regulation	48	06	S6	2015/21 +Corri.1	2015/11/9	2015/10/8	Installation of Lights	-It shall additionally be stipulated that the hazard warning signal may be switched on automatically to indicate to other road-users the risk of imminent danger which is defined by other regulations. -Mandatory requirement regarding large vehicles for three additional side turn signal lamps, or side marker lamps on each side to flash simultaneously with the direction indicator lamps on the same side. -In case the front fog lamp is reciprocally incorporated with other functions, it shall be exempted from the independent activation rule. -Both the right and left cornering lamps may be kept on till the vehicle attains the forward driving speed of 10km/h.
8	Agreement regarding UN/ECE regulation	55	01	S4	2015/7	2015/11/9	2015/10/8	Mechanical Coupling	-Requirements for a movable coupling shall be added. -Revision of Annex 5 as well as Annex 6.
9	Adopted proposal regarding UN/ECE regulation	58	03		2015/85	2015/11/11		Rear Underrun Protection	According to the intensification of the load test, the test method shall be changed.
10	Agreement regarding UN/ECE regulation	59	02		2015/4	2015/11/9	2015/10/8	Replacement Silencing System	A total revision of the content in accordance with R51-03 series.
11	Adopted proposal regarding UN/ECE regulation	94	02	S6	2015/95	2015/11/11		Protection of the Occupants in the Event of a Frontal Collision	-Through all text of the Regulation, "Rechargeable Energy Storage System (REESS)" shall be amended to read: "Rechargeable Electrical Energy Storage System (REESS)". -The "rear-view mirrors" referred to in the definition of vehicle width shall be amended to read "external devices for indirect vision".
			03		2015/96	2015/11/11			-The threshold value for the thorax compression criterion (ThCC) shall be changed. -Addition of a rule to restrain the dummy with the safety belt. -Adjustment with the regulation for frontal collision (R137).
12	Adopted proposal regarding UN/ECE regulation	95	03	S6	2015/97	2015/11/11		Protection of the Occupants in the Event of a Lateral Collision	Through all text of the Regulation, "Rechargeable Energy Storage System (REESS)" shall be amended to read: "Rechargeable Electrical Energy Storage System (REESS)".
13	Adopted proposal regarding UN/ECE regulation	97	01	S8	2015/87	2015/11/11		Vehicle Alarm Systems	It shall additionally be stipulated that any optical signal or any use of lighting and light-signalling devices outside the passenger compartment providing information on the status of the VAS (set, unset, alarm setting period, alarm has been activated) shall fulfil the requirements of R48.
14	Agreement regarding UN/ECE regulation	98	01	S6	2015/27	2015/11/9	2015/10/8	Gas-Discharge Headlamps	-Unification regarding the composition of test mixture applied to the thermal resistance test of plastic lens.
	Adopted proposal regarding UN/ECE regulation		01	S7	2015/80	2015/11/11			Clarification regarding the approval procedure according to addition of new gas-discharge light sources.
15	Adopted proposal regarding UN/ECE regulation	100	02	S3	2015/98	2015/11/11		Electric Power Train	Through all text of the Regulation, "Rechargeable Energy Storage System (REESS)" shall be amended to read: "Rechargeable Electrical Energy Storage System (REESS)"
16	Agreement regarding UN/ECE regulation	110	01	S3	2015/13	2015/11/9	2015/10/8	Vehicles Using CNG/LNG	-Classes 5 and 6 shall be added to categories of CNG/LNG components. -Addition of test methods for Classes 5 and 6.
	Adopted proposal regarding UN/ECE regulation		01	S4	2015/89	2015/11/11			Addition of components to the LNG system.
17	Adopted proposal regarding UN/ECE regulation	116	00	S5	2015/91	2015/11/11		Protection Against Unauthorized Use	It shall additionally be stipulated that any optical signal or any use of lighting and light-signalling devices outside the passenger compartment providing information on the status of the VAS (set, unset, alarm setting period, alarm has been activated) shall fulfil the requirements of R48.
18	Adopted proposal regarding UN/ECE regulation	127	02		2015/99	2015/11/11		Pedestrian Safety	The leg test area shall properly be defined.
19	Agreement regarding UN/ECE regulation	128	00	S4	2015/33 +Corr.1	2015/11/9	2015/10/8	LED	-Two new LED light sources shall be added. -Error correction.

PAGETOP

---

Table of amended regulations (Jan. 2016)

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Agreement regarding UN/ECE regulation	3	02	S16	2015/14	2015/11/9	2015/10/8	Reflex reflectors	When the downward visibility angle requirements are mitigated, a vertical arrow directed downwards shall be added to the approval mark.
2	Agreement regarding UN/ECE regulation	7	02	S24	2015/15	2015/11/9	2015/10/8	Front and rear position(side)lamps, stop lamps and end-outline marker lamps	Expression shall be clarified.
3	Agreement regarding UN/ECE regulation	13	11	S13	2015/6	2015/11/9	2015/10/8	Braking (categories M, N and O)	Revision of Annex10.
4	Agreement regarding UN/ECE regulation	19	04	S8	2015/16	2015/11/9	2015/10/8	Front fog lamps	-Considering R112, the marking requirements regarding the LED modules for front fog lamp shall be revised. -Revision of the composition of test mixture used for the thermal resistance test, －Revision ｏｆ the measurement requirements for the trichromatic coordinates. -Error correction.
5	Agreement regarding UN/ECE regulation	23	00	S20	2015/17	2015/11/9	2015/10/8	Reversing and manoeuvring lamps	Revision regarding the luminous intensity distribution measurement of light sources other than filament lamps.
6	Agreement regarding UN/ECE regulation	38	00	S17	2015/19	2015/11/9	2015/10/8	Rear fog lamps	Clarification of the definition of type.
7	Agreement regarding UN/ECE regulation	41	04	S2	2015/2	2015/11/9	2015/10/8	Noise (motor cycle)	Addition and correction of the symbol used in R41.
8	Agreement regarding UN/ECE regulation	45	01	S9	2015/20	2015/11/9	2015/10/8	Headlamp cleaners	Revision of the composition of test mixture to be applied to the lens surface for the luminous intensity recovery rate test.
9	Agreement regarding UN/ECE regulation	50	00	S17	2015/24	2015/11/9	2015/10/8	Lights (moped, motor cycle)	-An interdependent lamp shall be admitted for front position lamp, tail lamp as well as stop lamp. -The maximum allowable luminous intensity for each function shall be revised. -Relaxation of the view angle requirements below the horizontal in case the mounting height of the H plane is less than 750 mm from the ground.
10	Agreement regarding UN/ECE regulation	53	01	S17	2015/25 +Corri.1 +Corri.2	2015/11/9	2015/10/8	Installation of lights (motor cycle)	-An interdependent lamp shall be admitted for front position lamp, tail lamp as well as stop lamp. -Relaxation of the view angle requirements below the horizontal in case the mounting height of the H plane is less than 750 mm from the ground. -Error correction.
11	Agreement regarding UN/ECE regulation	75	00	S15	2015/8	2015/11/9	2015/10/8	Pneumatic tyres (l-category vehicles)	Tyres for ATV (all terrain vehicles) shall be removed from R105 and incorporated in R75.
12	Agreement regarding UN/ECE regulation	78	03	S2	2015/9	2015/11/9	2015/10/8	Braking (category L)	-Target categories of parking brake test shall be clarified. -Requirements for CBS and ABS shall be revised.
13	Agreement regarding UN/ECE regulation	112	01	S6	2015/29	2015/11/9	2015/10/8	Headlamps (with an asymmetrical passing beam)	-Unification regarding the composition of test mixture applied for the thermal resistance test of plastic lens. -Correction of sample number for measuring the objective luminous flux value of an LED module.
14	Agreement regarding UN/ECE regulation	113	01	S5	2015/30	2015/11/9	2015/10/8	Headlamps (with a symmetrical passing beam)	-Unification regarding the composition of test mixture applied to the thermal resistance test of plastic lens. -Correction of sample number for measuring the objective luminous flux value of an LED module. -Correction of sample number for measuring the objective luminous flux value of an LED module.
15	Agreement regarding UN/ECE regulation	117	02	S7	2015/5	2015/11/9	2015/10/8	The approval of tyres with regard to rolling sound emissions	-Error correction. -Addition of application items. -Addition of a new method for calculating the accuracy of speed in the deceleration method.
16	Agreement regarding UN/ECE regulation	119	01	S4	2015/31	2015/11/9	2015/10/8	Cornering lamps	Revision of requirements for the luminous intensity distribution measurement regarding lamps other than filament lamps.
17	Agreement regarding UN/ECE regulation	123	01	S7	2015/32	2015/11/9	2015/10/8	AFS	-Unification regarding the composition of test mixture applied for the thermal resistance test of plastic lens. -Correction of sample number for measuring the objective luminous flux value of an LED module. -Correction of the table on limits of exposure to ultraviolet radiation at the UV radiation test on an LED module.
18	Agreement regarding UN/ECE regulation	129	00	S4	2015/43	2015/11/9	2015/10/8	Enhanced child restraint systems (ECRS)	Allowable facing directions shall be added regarding the Enhanced Child Restraint Systems with Y-shaped belts.

PAGETOP

---

Table of amended regulations (Dec. 2015)

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Agreement regarding UN/ECE regulation	14	R5	C1		2015/2/18		Safety belt anchorages	Error correction.
2	Agreement regarding UN/ECE regulation	30	R3	A3-C1		2014/8/27		Pneumatic tyres (passenger vehicle)	Error correction.
3	Agreement regarding UN/ECE regulation	34	R2	C1		2013/9/11		Prevention of fire risks	Error correction.
			R2	C2		2015/6/30			Error correction.
4	Agreement regarding UN/ECE regulation	99	R3	C1		2015/3/4		Gas-discharge light sources	Error correction.
			00	S10	2015/28	2015/11/9	2015/10/8		A new gas discharge light source shall be added and the IEC data regarding the cap sheet shall be updated.

PAGETOP

---

Table of amended regulations (Nov. 2015)

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Adopted proposal regarding UN/ECE regulation	51	03		2015/62	2015/6/24		Noise	-Introduction of noise emission measurement methods during city driving as well as those methods related to ASEP. -Regulation value(s) shall be strengthened.
2	Adopted proposal regarding UN/ECE regulation	83	06	S5	2015/56	2015/6/24		The emission of pollutants according to engine fuel requirements	-A revision to enable application of the fuel approved according to E10/B7 for 06 series. -Annex11 shall be revised for consideration of requirements in 07 series.
			07	S1	2015/57	2015/6/24			The requirements for OBD in 07 series shall be revised.
3	Adopted proposal regarding UN/ECE regulation	109	00	S7	2015/67	2015/6/24		Retreaded pneumatic tyre (commercial vehicle)	Consideration of requirements regarding snow tyre for use in severe snow conditions of R117.
4	Agreement regarding UN/ECE regulation	RE3				2014/8/25		Consolidated resolution on the construction of vehicles	Revision of the tables of categories for which the provisions of UN regulations shall be applied.

PAGETOP

---

Table of amended regulations (Oct. 2015)

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Adopted proposal regarding UN/ECE regulation	9	07	S1	2015/59	2015/6/24		Noise (Three-wheeled Vehicles)	Addition of the new ISO regulation regarding the road surface.
2	Adopted proposal regarding UN/ECE regulation	14	07	S6	2015/46	2015/6/24		Safety belt anchorages	Clarification of understanding of the specifications required for ISOFIX regarding the convertible vehicles and vehicles with more than one seat row.
3	Adopted proposal regarding UN/ECE regulation	17	08	S3	2015/47	2015/6/24		Seats	-Error correction. -Rearrangement of transitional regulations. -Revision of the test procedure for devices intended to protect the occupants against displacement of luggage.
4	Adopted proposal regarding UN/ECE regulation	28	00	S4	2015/60	2015/6/24		Audible warning devices	Revision of the test method as well as the lower limit value of judgment.
5	Adopted proposal regarding UN/ECE regulation	29	03	S3	2015/48	2015/6/24		Cab of commercial vehicles	Clarification regarding the test evaluation and the measuring rim code.
6	Adopted proposal regarding UN/ECE regulation	41	04	S3	2015/61	2015/6/24		Noise (motor cycle)	Addition of the new ISO regulation regarding the road surface.
7	Adopted proposal regarding UN/ECE regulation	49	06	S3	2015/55	2015/6/24		Emissions of compression ignition and positive ignition engines	According to the revision of the EU regulation, relevant items such as those of OBD, etc. shall be revised.
8	Adopted proposal regarding UN/ECE regulation	54	00	S20	2015/66	2015/6/24		Pneumatic tyres(commercial vehicle)	-The explanation about the marking location of "LT" shall be corrected. -Sizes of the high floatation tyres shall be added.
9	Adopted proposal regarding UN/ECE regulation	59	02	S1	2015/63	2015/6/24		Replacement silencing system	Definition of the silencing system, etc., shall be adjusted with EU regulation.
10	Adopted proposal regarding UN/ECE regulation	63	02	S1	2015/64	2015/6/24		Noise (moped)	Addition of the new ISO regulation regarding the road surface.
11	Adopted proposal regarding UN/ECE regulation	80	03	S1	2015/49	2015/6/24		Seat (large passenger vehicle)	According to revision of the EU regulation, relevant items such as those of OBD, etc. shall be revised.
12	Adopted proposal regarding UN/ECE regulation	95	03	S5	2015/50	2015/6/24		Protection of the occupants in the event of a lateral collision	Deletion of Appendix 3 regarding the characteristics of the movable deformable barrier.
13	Adopted proposal regarding UN/ECE regulation	100	01	S4	2015/51	2015/6/24		Electric power train	-Protection against electrical shock: Protection requirements against direct contact with connectors.. -Clarification of regulations regarding direct contact with the high voltage power supplies.
			02	S2	2015/52	2015/6/24			-Protection against electrical shock: Protection requirements against direct contact with connectors. -Clarification of regulations regarding direct contact with the high voltage power supplies.
14	Adopted proposal regarding UN/ECE regulation	101	01	S5	2015/58	2015/6/24		Emission of carbon dioxide and fuel consumption (passenger car)	In relation with the revision of R83-07 series, E10/B7 shall be added to the definition of fuel for type approval application in R101.
15	Adopted proposal regarding UN/ECE regulation	117	02	S8	2015/65	2015/6/24		The approval of tyres with regard to rolling sound emissions	Rolling resistance test: Description regarding the time control as well as the accuracy of measurement devices shall be corrected.
16	Agreement regarding UN/ECE regulation	134	00		2014/78	2015/6/25	2015/6/15	Hydrogen and fuel cell vehicles	A new regulation regarding HFCV.
	Adopted proposal regarding UN/ECE regulation		00	S1	2015/53	2015/6/24			MFP(Maximum Fuelling Pressure) shall be added to the list of items to be shown on the fuel receptacle label.
17	Agreement regarding UN/ECE regulation	135	00		2014/79	2015/6/25	2015/6/15	Pole side impact	A new regulation regarding the pole side impact on the frame and body.
	Adopted proposal regarding UN/ECE regulation		01		2014/80	2014/11/12			The test vehicle speed shall be changed.
			00	S1	2015/54	2015/6/24			Clarification of understanding of N1 category.
			01	S1	2015/71	2015/6/24			Clarification of understanding of N1 category.

PAGETOP

---

Table of amended regulations (Sep. 2015)

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Agreement regarding UN/ECE regulation	4	00	S17	2014/54	2015/6/22	2015/6/15	Rear registration plate lamps	Addition of new plate sizes.
2	Agreement regarding UN/ECE	6	01	S26	2014/55	2015/6/22	2015/6/15	Direction indicators	In order to consider light sources other than filament bulbs, the word "filament" shall be deleted.
3	Agreement regarding UN/ECE	11	04		2014/71	2015/6/22	2015/6/15	Door latches and hinges	A revision to prevent passengers from being locked in the　vehicle interior while the full lock system is activated.
4	Agreement regarding UN/ECE	13	11	S12	2014/45 /Rev.1	2015/6/22	2015/6/15	Braking (categories M, N and O)	-Regarding the symbol of EVSC the requirements of R121 shall be referred to. -Clarification of remarks to exemption rules of EVSC. -Rearrangement of transitional provisions.
5	Agreement regarding UN/ECE	13H	00	S16	2014/46 /Rev.1	2015/6/22	2015/6/15	Braking (M1)	-The provisions of requirements for ESC symbol shall be transferred to R121. -Rearrangement of transitional provisions.
6	Agreement regarding UN/ECE	19	04	S7	2013/75 /Rev.1	2015/6/22	2015/6/15	Front fog lamps	-Deletion of "DLS(Distributed Lighting System)". -The angles in the horizontal position toward the right end the left shall be corrected.
7	Agreement regarding UN/ECE	25	4	S1	2014/72	2015/6/22	2015/6/15	Head restraints	Detailed explanation of application extent.
8	Agreement regarding UN/ECE	34	03		2014/65	2015/6/22	2015/6/15	Prevention of fire risks	Prevention of fire risks in the event of a rear collision shall be mandatory. The requirement for rear collision velocity shall be changed.
9	Agreement regarding UN/ECE	37	03	S43	2014/56	2015/6/22	2015/6/15	Filament lamps	Lamps with plastic wedge base shall be added.
10	Agreement regarding UN/ECE	43	01	S3	2014 /66+2014 /67	2015/6/22	2015/6/15	Safety glazing materials	-Addition of definition of terms according to the addition of plastic windscreen. -The regulation 43 shall not be applied to small plastic glazing that is not required for either the driver's forward or rearward field of vision.
11	Agreement regarding UN/ECE	44	04	S9	2014/73	2015/6/22	2015/6/15	Child restraint systems	-The impact shields shall be grouped in two classes. -Regarding the toxicity and the flammability of material, reference standards shall be changed. -Impact test requirements shall be changed. -The methods of test after assembly shall be changed for child restraint systems. -Clarification of manikins to be applied for testing products which are suitable for more than one mass group. -Additional description of the worst case. -The sample numbers for approval of production shall be changed. -Addition of COP requirements.
12	Agreement regarding UN/ECE	48	06	S5	2014/59	2015/6/22	2015/6/15	Installation of lights	-The single lamp requirements which were different among lamp sorts shall be unified. -A Class F retro-reflector material with red and white stripes shall be added.
13	Agreement regarding UN/ECE	53	01	S16	2014/60	2015/6/22	2015/6/15	Installation of lights (motor cycle)	Optional fitting of high-mount stop lamp shall be admitted.
14	Agreement regarding UN/ECE	70	01	S9	2014/61	2015/6/22	2015/6/15	Rear marking plates for heavy and long vehicles	Rear marking plates of Class 5 shall be added.
15	Agreement regarding UN/ECE	98	01	S5	2013/90 /Rev.1	2015/6/22	2015/6/15	Gas-discharge headlamps	-Deletion of DLS. -Amendment of COP.
16	Agreement regarding UN/ECE	104	00	S8	2014/62	2015/6/22	2015/6/15	Retro-reflective markings for heavy and long vehicles	-A class F retro-reflector tape with reciprocal red and white stripes for vehicles and trailers shall be added.
17	Agreement regarding UN/ECE	105	05	S2	2014/68	2015/6/22	2015/6/15	The carriage of dangerous goods with regard to their specific constructional features	Regarding the circuit with normally turned on electricity, the electric connection and the lamp, reference standards shall be changed.
18	Agreement regarding UN/ECE	107	06	S1	2014/70	2015/6/22	2015/6/15	Category M2 or M3 vehicles with regard to their general construction	-The definition of the overnight locking system shall be corrected. -Transitional provisions shall be corrected. -It shall not be possible to start the engine from the driver's position when the main engine access panel is open. -Requirements for opening emergency windows. -In low floor buses a kneeling system may be engaged. -Correction of detailed provisions for the trolleybus
19	Agreement regarding UN/ECE	112	01	S5	2013/92 /Rev.1	2015/6/22	2015/6/15	Headlamps (with an asymmetrical passing beam)	Correction of the COP requirements.
20	Agreement regarding UN/ECE	113	01	S4	2014 /63+2013 /93/Rev.1	2015/6/22	2015/6/15	Headlamps (with a symmetrical passing beam)	-LED light sources shall be admitted. Error correction in the provisions regarding admission of lighting by means of an additional light source in case of banking. -Correction of the reference supplement.
21	Agreement regarding UN/ECE	121	01		2012/30+2012 /30/Corr.1	2015/6/22	2015/6/15	The location and identification of hand controls, tell-tales and indicators	Addition of ESC symbol.
22	Agreement regarding UN/ECE	128	00	S3	2014/64	2015/6/22	2015/6/15	LED	Addition of a white LED standard light source.

PAGETOP

---

Table of amended regulations (Aug. 2015)

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Agreement regarding UN/ECE regulation	83	06	S4	2014/40	2015/2/3	2015/1/22	The emission of pollutants according to engine fuel requirements	-Consideration of the EM limits by EU for M1 vehicles that meet the definition of "specific social needs". -Clarification of the definition of "social needs". -Correction of the Scope. -Error correction.
			07		2014/41	2015/2/4	2015/1/22		Adjustment with EURO VI.

PAGETOP

---

Table of amended regulations (Jul. 2015)

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Adopted proposal regarding UN/ECE regulation	43	01	S4	2015/11	2015/3/11		Uniform provisions concerning the approval of safety glazing materials	Addition of requirements regarding laminated rigid plastic windscreens and .laminated rigid plastic panes other than windscreens.
	Agreement regarding UN/ECE regulation		R3	C3		2014/7/10			Error correction.
			R3	C5	2015/34	2015/4/23	2015/3/11		Error correction.
2	Adopted proposal regarding UN/ECE regulation	59	02		2015/4	2015/3/11		Replacement silencing system	A total revision of the content in accordance with R51-03 series.
3	Adopted proposal regarding UN/ECE regulation	110	01	S3	2015/13	2015/3/11		Vehicles using CNG	-Addition of Class 5 and Claｓｓ 6 regarding classification of components containing CNG/LNG. -Addition of definition of test pressure to the added classes.
4	Adopted proposal regarding UN/ECE regulation	128	00	S4	2015/33	2015/3/11		LED	Addition of 2 LED light sources anew.
					2015/33 /Corr.1	2015/3/11			Error correction.

PAGETOP

---

Table of amended regulations (Jun. 2015)

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Adopted proposal regarding UN/ECE regulation	37	03	S44	2015/18	2015/3/11		Filament lamps	-The definition of the filament of bulb shall be clarified. -New halogen bulbs shall be adopted. -Error correction.
2	Adopted proposal regarding UN/ECE regulation	48	04	S15	2015/23	2015/3/11		Installation of lights	-Addition of a description that the hazard warning signal may be switched on automatically to indicate to other road-users the risk of imminent danger which is defined by other regulations. -In case the front fog lamp is reciprocally incorporated with other functions, it shall be exempted from the independent activation rule. -Both the right and left cornering lamps may be kept on till the vehicle attains the forward driving speed of 10km/h
					2015/23/Corr.1	2015/3/11			Error correction.
			05	S8	2015/22	2015/3/11			-Addition of a description that the hazard warning signal may be switched on automatically to indicate to other road-users the risk of imminent danger which is defined by other regulations. -In case the front fog lamp is reciprocally incorporated with other functions, it shall be exempted from the independent activation rule. -Both the right and left cornering lamps may be kept on till the vehicle attains the forward driving speed of 10km/h
					2015/22/Corr.1	2015/3/11			Error correction.
			06	S6	2015/21	2015/3/11			-Addition of a description that the hazard warning signal may be switched on automatically to indicate to other road-users the risk of imminent danger which is defined by other regulations. -Mandatory requirement regarding large vehicles for three additional side turn signal lamps, or side marker lamps on each side to flash simultaneously with the direction indicator lamps on the same side.　 -In case the front fog lamp is reciprocally incorporated with other functions, it shall be exempted from the independent activation rule. -Both the right and left cornering lamps may be kept on till the vehicle attains the forward driving speed of 10km/h
					2012/21/Corr.1	2015/3/11			Error correction.
3	Adopted proposal regarding UN/ECE regulation	50	00	S17	2015/24	2015/3/11		Lights (moped, motor cycle)	-An interdependent lamp shall be admitted for front position lamp, tail lamp as well as stop lamp. -The maximum allowable luminous intensity for each function shall be revised. -Relaxation of the view angle requirements below the horizontal in case the mounting height of the H plane is less than 750 mm from the ground.
4	Adopted proposal regarding UN/ECE regulation	53	01	S17	2015/25	2015/3/11		Installation of lights (motor cycle)	-An interdependent lamp shall be admitted for front position lamp, tail lamp as well as stop lamp. -The maximum allowable luminous intensity for each function shall be revised. -Relaxation of the view angle requirements below the horizontal in case the mounting height of the H plane does not exceed 750 mm from the ground.
					2015/25/Corr.1	2015/3/11			Error correction.
					2015/25/Corr.2	2015/3/11			Error correction.
5	Adopted proposal regarding UN/ECE regulation	55	01	S4	2015/7	2015/3/11		Mechanical coupling	-Requirements for a movable coupling shall be added. -Revision of Annex 5 as well as Annex 6.
6	Adopted proposal regarding UN/ECE regulation	75	00	S15	2015/8	2015/3/11		Pneumatic tyres (moped, motor cycle)	Tyres for ATV (all terrain vehicles) shall be removed from R105 and incorporated in R75.
7	Adopted proposal regarding UN/ECE regulation	78	03	S2	2015/9	2015/3/11		Braking (category L)	-Target categories of parking brake test shall be clarified.　 -Requirements for CBS and ABS shall be revised.
8	Adopted proposal regarding UN/ECE regulation	98	01	S6	2015/27	2015/3/11		Gas-discharge headlamps	Unification regarding the composition of test mixture applied to the thermal resistance test of plastic lens.
9	Adopted proposal regarding UN/ECE regulation	99	00	S10	2015/28	2015/3/11		Gas-discharge light sources	A new gas discharge light source shall be added and the cap sheet shall be updated.
10	Adopted proposal regarding UN/ECE regulation	107	05	S3	2015/12	2015/3/11		Category M2 or M3 vehicles with regard to their general construction	The loading conditions shall be changed.
			06	S2	2015/44	2015/3/11			The loading conditions shall be changed.
					2014/77	2015/3/11			The driver shall be provided with a device to alarm him/her in case the compartment temperature increases excessively. Besides,　requirements for activating the hazard lamp shall also be added, in order to warn the other road-users of the danger.
11	Adopted proposal regarding UN/ECE regulation	112	01	S6	2015/29	2015/3/11		Headlamps (with an asymmetrical passing beam)	-Unification regarding the composition of test mixture applied to the thermal resistance test of plastic lens.　 -Correction of sample number for measuring the objective luminous flux value of an LED module.
12	Adopted proposal regarding UN/ECE regulation	113	01	S5	2015/30	2015/3/11		Headlamps (with a symmetrical passing beam)	-Unification regarding the composition of test mixture applied to the thermal resistance test of plastic lens.　 -Correction of sample number for measuring the objective luminous flux value of an LED module. -Correction of the table on limits of exposure to ultraviolet radiation at the UV radiation test on an LED module.
13	Adopted proposal regarding UN/ECE regulation	117	02	S7	2015/5	2015/3/11		The approval of tyres with regard to rolling sound emissions	-Error correction. -Addition of application items. -Addition of a new method for calculating the accuracy of speed in the deceleration method.
14	Adopted proposal regarding UN/ECE regulation	119	01	S4	2015/31	2015/3/11		Cornering lamps	Revision of requirements for the luminous intensity distribution measurement regarding lamps other than filament lamps.
15	Adopted proposal regarding UN/ECE regulation	123	01	S7	2015/32	2015/3/11		AFS	-Unification regarding the composition of test mixture applied to the thermal resistance test of plastic lens.　 -Correction of sample number for measuring the objective luminous flux value of an LED module. -Correction of the table on limits of exposure to ultraviolet radiation at the UV radiation test on an LED module.
16	Adopted proposal regarding UN/ECE regulation	129	00	S4	2015/43	2015/3/11		Enhanced child restraint systems (ECRS)	Allowable facing directions shall be added regarding the Enhanced Child Restraint Systems with Y-shaped belts.

PAGETOP

---

Table of amended regulations (May 2015)

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Adopted proposal regarding UN/ECE regulation	3	02	S16	2015/14	2015/3/11		Reflex reflectors	When the downward visibility angle requirements are mitigated, a vertical arrow directed downwards shall be added to the approval mark.
2	Agreement regarding UN/ECE regulation	4		R3 -C1	-	2015/3/24		Rear registration plate lamps	Error correction.
3	Adopted proposal regarding UN/ECE regulation	7	02	S24	2015/15	2015/3/11		Front and rear position(side)lamps, stop lamps and end-outline marker lamps	Clarification of expression.
4	Adopted proposal regarding UN/ECE regulation	13	11	S13	2015/6	2015/3/11		Braking (categories M, N and O)	Revision of Annex 10.
5	Adopted proposal regarding UN/ECE regulation	19	04	S8	2015/16	2015/3/11		Front fog lamps	-The marking for LED modules used for the front fog lamp shall be revised in accordance with R112. -Revision of the composition of test mixture used for the thermal resistance test, -Revision oｆ the measurement requirements of the trichromatic coordinates. -Error correction.
6	Adopted proposal regarding UN/ECE regulation	23	00	S20	2015/17	2015/3/11		Reversing and manoeuvring lamps	Revision regarding the luminous intensity distribution measurement for light sources other than filament lamps.
7	Adopted proposal regarding UN/ECE regulation	38	00	S17	2015/19	2015/3/11		Rear fog lamps	Clarification of the definition of type.
8	Adopted proposal regarding UN/ECE regulation	41	04	S2	2015/2	2015/3/11		Noise (motor cycle)	Addition and correction of the symbol used in R41.
9	Adopted proposal regarding UN/ECE regulation	45	01	S9	2015/20	2015/3/11		Headlamp cleaners	Revision of the composition of test mixture to be applied to the lens surface for the luminous intensity recovery rate test.
10	Agreement regarding UN/ECE regulation	87	00	S17	2013/23	2013/11/27	2013/11/3	Daytime running lamps	-Addition of requirements for Y lamp. -In case of failure of any one light source in a single lamp containing more than one light source, the minimum luminous intensity requirements shall be relaxed.
11	Agreement regarding UN/ECE regulation	90	02	S2	2014/49	2015/2/3	2015/1/22	Replacement brake lining assemblies	-Addition and clarification of descriptions regarding the application extent and the definition. -Error correction in the requirements for brake discs and brake drams in M and N categories. -Correction of expression of the formula in the requirements for brake discs and brake drams in O category.
12	Agreement regarding UN/ECE regulation	91		R3 -C1	-	2015/3/13		Side-marker lamps	Error correction.
13	Agreement regarding UN/ECE regulation	101	01	S4	2014/42	2015/2/3	2015/1/22	Emission of carbon dioxide and fuel consumption (passenger car)	Correction of the part regarding fuel properties for adjustment with EU regulation.
14	Agreement regarding UN/ECE regulation	127	01		2014/38	2015/2/4	2015/1/22	Pedestrian safety	-The impactor to be used for the legform test shall be replaced with the flex legform impactor. -The impact point height shall be changed. -The requirement item for injury shall be changed. -The certification test method shall be changed. -Deletion of humidity control requirement during the test.

PAGETOP

---

Table of amended regulations (Apr. 2015)

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Agreement regarding UN/ECE regulation	29	03	S2	2014/35	2015/2/3	2015/1/22	Cab of Commercial Vehicles	The scope shall be changed.
2	Agreement regarding UN/ECE regulation	44	04	S8	2014/36	2015/2/3	2015/1/22	Child Restraint Systems	-Change of operation extent of the load application device for turn over test. -Addition of B1 to the classes to be submitted to the crash test without an anti-rotation device.
3	Agreement regarding UN/ECE regulation	49	05	S7	2014/39	2015/2/3	2015/1/22	Emissions of Compression Ignition and Positive Ignition Engines	Adjustment with the contents of EU regulation.
4	Agreement regarding UN/ECE regulation	51	02	S10	2014/44	2015/2/3	2015/1/22	Noise	A revision to enable usage of both the new and the old ISO road surfaces.
5	Agreement regarding UN/ECE regulation	54	00	S19	2014/47	2015/2/3	2015/1/22	Pneumatic Tyres (Commercial Vehicle)	-Addition of naming inch-size. -Error correction in the definition of tyres.
6	Agreement regarding UN/ECE regulation	75	00	S14	2014/48	2015/2/3	2015/1/22	Pneumatic Tyres (Moped, Motor Cycle)	Clarification of the description regarding the high-speed test of tyres for two-wheel vehicles designed for maximum speeds above 240 km/h.
7	Agreement regarding UN/ECE regulation	118	02	S1	2013/12	2013/11/27	2013/11/3	The Burning Behaviour of Materials Used in the Construction of Certain Categories of Motor Vehicles	-Revision regarding the partition wall in the compartment. -Materials inside of, or not more than 13mm above the surface of the interior compartments, materials of engine compartment and heater compartment shall fulfill the conditions of Part II.
8	Agreement regarding UN/ECE regulation	119	01	S3	2013/24	2013/11/27	2013/11/3	Cornering Lamps	-Deletion of the "1cd requirement within the visibility angle".

PAGETOP

---

Table of amended regulations (Mar. 2015)

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Agreement regarding UN/ECE regulation	13	11	S11	2014/3	2014/10/17	2014/10/9	Braking	Addition of an application procedure based on computer simulation for approval of EVSC.
	Adopted proposal regarding UN/ECE regulation		11	S12	2014 /45 /Rev.1	2014/11/12			-Regarding the symbol of EVSC the requirements of R121 shall be referred to. -Clarification of remarks to exemption rules of EVSC. -Rearrangement of transitional provisions.
2	Adopted proposal regarding UN/ECE regulation	13H	00	S16	2014 /46 /Rev.1	2014/11/12		Braking (M1)	-The provisions of requirements for ESC symbol shall be transferred ｔｏ R121. -Rearrangement of transitional provisions.
3	Adopted proposal regarding UN/ECE regulation	19	04	S7	2013 /75 /Rev.1	2014/11/12		Front fog lamps	-Deletion of "DLS(Distributed Lighting System)". -The angles in the horizontal position toward the right end the left shall be corrected.
	Agreement regarding UN/ECE regulation		04	S6	2014 /17+2013 /75 /Add.1	2014/10/17	2014/10/9		-Error correction regarding transitional provisions. -Error correction in the luminous intensity requirements for Class F3 front fog lamp.
4	Agreement regarding UN/ECE regulation	27	04		2014/18	2014/10/16	2014/10/9	Warning triangles	-A type 2 advance-warning triangle shall be added. -The test method shall be updated.
5	Adopted proposal regarding UN/ECE regulation	37	03	S43	2014/56	2014/11/12		Filament lamps	Lamps with plastic wedge base shall be added.
6	Adopted proposal regarding UN/ECE regulation	43	01	S3	2014/66	2014/11/12		Uniform provisions concerning the approval of safety glazing materials	Addition of definition of terms according to the addition of plastic windscreen.
7	Adopted proposal regarding UN/ECE regulation	48	04	S14	2014/57	2014/11/12		Installation of lights	-The single lamp requirements which were different among lamp sorts shall be unified. -A Class F retro-reflector material with red and white stripes shall be added. -Y lamps shall be admitted as direction indicator lamps.
			05	S7	2014/58	2014/11/12			-The single lamp requirements which were different among lamp sorts shall be unified. -A class F retro-reflector material with red and white stripes shall be added. -A class F retro-reflector material with red and white stripes shall be added.
			06	S5	2014/59	2014/11/12			-The single lamp requirements which were different among lamp sorts shall be unified. -A class F retro-reflector material with red and white stripes shall be added.
	Agreement regarding UN/ECE regulation		06	S3	2013/82	2014/6/23	2014/6/10		-The lower end of the fitting height of the front position lamp shall be lowered. -Clarification that non-replaceable light sources shall be exempted from the application extend of the light source replacement requirements. -Error correction. -The transitional provisions shall be simplified. -In case the LED headlamp fails, if all the light sources of the headlamp assembly turn off, the failure tell-tale shall not be required. -The contents of ANNEX 10 shall be deleted, but, providing for a correction in the future, the paragraph shall remain as "Reserved".. -Deletion of reference to R31.
			06	S4	2014/21	2014/10/16	2014/10/9		-Addition of fitting requirements for the reciprocally dependent lamps(Y lamps), usage of which was admitted according to the revision of R6. -The starting velocity of the high-speed mode of AFS shall be changed.
8	Agreement regarding UN/ECE regulation	53	01	S15	2013/29	2013/11/27	2013/11/3	Installation of lights (motor cycle)	The threshold value of the bank angle to activate HIAS shall be changed.
			R3	C1-A1		2015/1/23			Error correction.
	Adopted proposal regarding UN/ECE regulation		01	S16	2014/60	2014/11/12			-Optional fitting of high-mount stop lamp shall be admitted.
9	Agreement regarding UN/ECE regulation	67	01	S13	2013/97		2014/6/10	Specific equipment of vehicles using LPG	-With regard to including the high pressure rubber hose of class 1 in an assembly, definition and test method for approval shall be added. -Rationalization of the approval procedure.
			01	S14	2014/10	2014/10/16	2014/10/9		Standards preparing for driving of HV shall be added.
10	Adopted proposal regarding UN/ECE regulation	104	00	S8	2014/62	2014/11/12		Retro-reflective markings for heavy and long vehicles	-A class F retro-reflector tape with reciprocal red and white stripes for vehicles and trailers shall be added.
11	Adopted proposal regarding UN/ECE regulation	105	05	S2	2014/68	2014/11/12		The carriage of dangerous goods with regard to their specific constructional features	Regarding the circuit normally turned on electricity, the electric connection and the lamp, reference standards shall be changed.
12	Agreement regarding UN/ECE regulation	107	06		2013/100	2014/6/20	2014/6/10	Category M2 or M3 vehicles with regard to their general construction	-Overnight locking system: A rule for the case that a security locking system over night is left locked during driving. -Safety sign for operation of emergency exit(s): The pictogram indicating the operation procedure of the emergency exit(s) shall be located and orientated so as to be easily understood. -Escape hatches in the roof: Improvement regarding the number and the opening dimensions. -Fitting requirements for emergency lighting system: Illuminance, duration of lighting and location.
			04	S4	2014 /11+2014 /11 /corr1				-If there is a barrier in the gangway and come into contact with the gauge, the maximum force necessary to move such barrier out of the way shall not exceed 50 Newton. -Provisions shall be added for the case that vehicles of Classes III and B should be equipped with priority seats.
	Adopted proposal regarding UN/ECE regulation		05	S2	2014/69	2014/11/12			-Transitional provisions shall be corrected. -It shall not be possible to start the engine from the driver's position when the main engine access panel is open. -Requirements for opening emergency windows. -In low floor buses a kneeling system may be engaged.
			6	S1	2014/70	2014/11/12			-The definition of the overnight locking system shall be corrected.-Transitional provisions shall be corrected. -It shall not be possible to start the engine from the driver's position when the main engine access panel is open. -Requirements for opening emergency windows. -In low floor buses a kneeling system may be engaged. -Correction of detailed provisions for the trolleybus.
	Agreement regarding UN/ECE regulation		R3	C4		2014/12/8			Error correction.
			R4	C1		2014/12/8			Error correction.
			R5	C1		2014/12/8			Error correction.
			R6	C1		2014/12/8			Error correction.
			02	S3-C3		2014/12/8			Error correction.
13	Adopted proposal regarding UN/ECE regulation	112	01	S5	2013 /92 /Rev.1	2014/11/12		Headlamps (with an asymmetrical passing beam)	Correction of the COP requirements.
14	Adopted proposal regarding UN/ECE regulation	113	01	S4	2014/63	2014/11/12		Headlamps (with a symmetrical passing beam)	LED light sources shall be admitted. Error correction in the provisions regarding admission of lighting by means of an ａｄｄｉｔｉｏｎａｌ light source in case of banking.
					2013 /93 /Rev.1	2014/11/12			Correction of the reference supplement.
15	Adopted proposal regarding UN/ECE regulation	121	01		2012/30	2014/11/12		The location and identification of hand controls, tell-tales and indicators	Addition of ESC symbol.
					2012 /30 /corr.1	2014/11/12			Error correction.
16	Adopted proposal regarding UN/ECE regulation	128	00	S3	2014/64	2014/11/12		LED	Addition of a white LED standard light source.

PAGETOP

---

Table of amended regulations (Feb. 2015)

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Adopted proposal regarding UN/ECE regulation	4	00	S17	2014/54	2014/11/12		Rear registration plate lamps	Addition of new plate sizes.
2	Agreement regarding UN/ECE regulation	6	01	S25	2014/14	2014/10/29	2014/10/9	Direction indicators	-An interdependent lamp (a lamp marked Y) may be applied for a direction indicator. -Front as well as rear direction indicators may be activated sequentially.
	Adopted proposal regarding UN/ECE regulation		01	S26	2014/55	2014/11/12			The term "filament" shall be deleted so that light sources other than filament bulbs may be considered.
3	Agreement regarding UN/ECE regulation	10	05		2014/16	2014/10/16	2014/10/9	Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility	Addition of a method of testing electromagnetic compatibility of charging units while the EV is charged.
4	Adopted proposal regarding UN/ECE regulation	11	04		2014/71	2014/11/12		Door latches and hinges	A revision to prevent passengers from being locked in the　vehicle interior while the full lock system is activated.
5	Adopted proposal regarding UN/ECE regulation	25	04	S1	2014/72	2014/11/12		Head restraints	Detailed explanation of application extent.
6	Adopted proposal regarding UN/ECE regulation	34	03		2014/65	2014/11/12		Prevention of fire risks	Prevention of fire risks in the event of a rear collision shall be mandatory. The requirement for rear collision　velocity shall be changed.
7	Agreement regarding UN/ECE regulation	41	04	S1	2014/2	2014/10/17	2014/10/9	Noise (motor cycle)	The road surface for measuring the exhaust noise near the outlet shall be changed according to the new ISO.
8	Adopted proposal regarding UN/ECE regulation	44	04	S9	2014/73	2014/11/12		Child restraint systems	-The impact shields shall be grouped in two classes. -Regarding the toxicity and the flammability of material, standards to be referred to shall be changed. -Impact test requirements shall be changed. -Test methods shall be changed for child restraint systems after assembly. -Clarification of manikins to be applied for testing products which are suitable for more than one mass group. -Additional description of the worst case. -The sample numbers for approval of production shall be changed. -Addition of COP requirements.
9	Agreement regarding UN/ECE regulation	49	05	S6	2013/111	2014/6/23	2014/6/10	Emissions of compression ignition and positive ignition engines	-Dual fuel engines shall be added. -An EUROVI formula shall be added regarding petrol engine vehicles.
			06	S2	2013/ 112+2013 /112 /Corr.1	2014/6/23	2014/6/10		-Regarding dual fuel engines, CNG engines and LNG engines, the EUROVI requirements such as those for OBD, etc. shall be considered in R49. -Error correction.
	Adopted proposal regarding UN/ECE regulation		05	S7	2014/39	2014/6/25			Adjustment with the content of EU regulation.
10	Adopted proposal regarding UN/ECE regulation	70	01	S9	2014/61	2014/11/12		Rear marking plates for heavy and long vehicles	Rear marking plates of Class 5 shall be added.
11	Adopted proposal regarding UN/ECE regulation	98	01	S5	2013 /90 /Rev.1	2014/11/12		Gas-discharge headlamps	-Deletion of DLS. -Amendment of COP.
12	Agreement regarding UN/ECE regulation	110	01	S1	2013/101	2014/6/25	2014/6/10	Vehicles using CNG	Addition of LNG.
			01	S2	2014/12	2014/10/17	2014/10/9		-Addition of a regulation regarding the Bi-Fuel system. -Addition of "H1", "H2" or "H3" marks to the automatic cylinder valves. -Definition of the "commanded stop phase" (intermittent stop phase) in preparation for HV driving. -Requirements for the automatic cylinder valve regarding the commanded stop phases.
13	Agreement regarding UN/ECE regulation	117	02	S6	2013/66	2014/10/17	2014/10/9	The approval of tyres with regard to rolling sound emissions	The test method for wet grip shall be changed.

PAGETOP

---

Table of amended regulations (Jan. 2015)

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Agreement regarding UN/ECE regulation	3	02	S15	2014/13	2014/10/17	2014/10/9	Reflex reflectors	Detailed shape requirements shall be deleted.
2	Agreement regarding UN/ECE regulation	7	02	S23	2014/15	2014/10/17	2014/10/9	Front and rear position(side)lamps, stop lamps and end-outline marker lamps	-Clarification of the maximum luminous intensity requirements regarding the front position lamp. -Clarification of the maximum luminous intensity requirements in case a stop-lamp is reciprocally incorporated with a rear end-outline marker lamp.
3	Agreement regarding UN/ECE regulation	18	03	S3	2014/7	2014/10/17	2014/10/9	Protection against unauthorized use	The scope shall be changed.
4	Agreement regarding UN/ECE regulation	46	03	S3	2014/8	2014/10/17	2014/10/9	Rear-view mirrors	Correction of the rule regarding approval.
			04	S1	2014/9	2014/10/17	2014/10/9		-Clarification of the field of vision attainment of which shall be the proof of correct adjustment of indirect vision devices of Classes IV, V and Vi. -Prescription of requirements for an indirect vision device of Class V in case the field of vision required from Class V shall be attained by a combination of Classes V and VI.
5	Agreement regarding UN/ECE regulation	54		R3-C2	2014/51	2014/8/25	2014/6/25	Pneumatic tyres(commercial vehicle)	Error correction.
6	Agreement regarding UN/ECE regulation	74	01	S8	2014/23	2014/10/17	2014/10/9	Installation of lights (moped)	Vehicles of L1 category may be provided with optional hazard warning signal function.
7	Adopted proposal regarding UN/ECE regulation	83	06	S4	2014/40	2014/6/25		The emission of pollutants according to engine fuel requirements	-Consideration of the result of application in praxis of emissions limit for "special social needs vehicles" of M1 in EU. -Clarification of the definition of "social needs". -Correction of the scope. -Error correction.
			07		2014/41	2014/6/25			Adjustment with EUROVI.
8	Agreement regarding UN/ECE regulation	113	01	S3	2014/24	2014/10/17	2014/10/9	HEADLAMPS (with a symmetrical passing beam)	-Regarding the thermal resistance test, points and criteria of judgment shall be changed. -Judgment requirements for the wear proof test of plastic lens surface shall be added.
9	Agreement regarding UN/ECE regulation	123	01	S6	2014/25	2014/10/20	2014/10/9	AFS	-From the luminous intensity requirements redundant test methods due to duplication shall be deleted. -Correction of the text part where a term "Principal passing beam" is erroneously referred to.
10	Agreement regarding UN/ECE regulation	129	00	S3	2014/33	2014/10/17	2014/10/9	Enhanced child restraint systems (ECRS)	Addition of definition and test method for "infant carrier module".

PAGETOP

---

Table of amended regulations (Dec. 2014).

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Agreement regarding UN/ECE regulation	5	03		2013/70	2014/6/26	2014/6/10	Sealed beam headlamps	A revision to make recognition of a new approval impossible.
2	Agreement regarding UN/ECE regulation	16	06	S5	2013/104	2014/6/26	2014/6/10	Safety belts	The caution label for CRS in use shall be changed.
3	Agreement regarding UN/ECE regulation	31	03		2013/77	2014/6/26	2014/6/10	Halogen sealed beam headlamps	A revision to make recognition of a new approval impossible.
4	Agreement regarding UN/ECE regulation	37	03	S42	2013/78	2014/6/23	2014/6/10	Filament lamps	-Addition of bulbs for signal lamps. -The ID code of the approval mark shall be changed from 2 units to 3 units.
5	Agreement regarding UN/ECE regulation	99	00	S9	2013/91	2014/6/26	2014/6/10	Gas-discharge light sources	The ID code of the approval mark shall be changed from 2 units to 3 units.
6	Agreement regarding UN/ECE regulation	100	02	S1	2013/135	2014/6/24	2014/6/10	Electric power train	Addition of an exemption rule of isolation resistance requirements for the case that a high voltage circuit including low voltage parts （≦DC60V, or ≦AC60V） is connected with the chassis of an electric powered vehicle.

PAGETOP

---

Table of amended regulations (Nov. 2014).

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Agreement regarding UN/ECE regulation	12	04	S3	2013/102	2014/6/20	2014/6/10	Steering Mechanism	Clarification of protection requirements against electrical shock.
2	Agreement regarding UN/ECE regulation	14	07	S5	2013/103	2014/6/21	2014/6/10	Safety Belt Anchorages	-Clarification of understanding regarding the location of ISOFIX. -An exemption rule for vehicles not intended for use by children.
3	Agreement regarding UN/ECE regulation	17	08	S2	2013/105	2014/6/26	2014/6/10	Seats	Clarification of requirements for folding seats.
4	Agreement regarding UN/ECE regulation	19	03	S4	2013/74	2014/6/21	2014/6/10	Front Fog Lamps	Correction of the list of luminous intensity requirements.
5	Agreement regarding UN/ECE regulation	94	02	S5	2013/107	2014/6/24	2014/6/10	Protection Of The Occupants In The Event Of A Frontal Collision	-Regarding vehicles equipped with a frontal protection air bag but not provided with a sun visor nor a roof, the location of the caution label for a case using the rearward facing CRS shall be corrected. . -Clarification of protection requirements against electrical shock for the coupling system of charging equipment, which is not energized during driving conditions.
6	Agreement regarding UN/ECE regulation	103	00	S4	2013/114	2014/6/24	2014/6/10	Replacement Catalytic Converters	Consideration of EURO6.
7	Adopted proposal regarding UN/ECE regulation	127	00	S1	2014/37	2014/6/25		Pedestrian Safety	-Clarification of "headform test area" as well as "legform test area" -Clarification of definition regarding the impact location for headform test as well as legform test. -Clarification of definition regarding the zones for the test areas. -Appropriate selection of measurement method for the distance between measurement points of the leg form. -Clarification of measurement method regarding inaccuracy of impact location. -Error correction.
			01		2014/38	2014/6/25			-The impactor to be used for the legform test shall be replaced with the flex legform impactor. -The impact point height shall be changed. -The requirement item for injury shall be changed. -The certification test method shall be changed. -Deletion of humidity control requirement during the test.

PAGETOP

---

Table of amended regulations (Oct. 2014).

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Adopted proposal regarding UN/ECE regulation	29	03	S2	2014/35	2014/6/25		Cab of commercial vehicles	Revision of the scope.
2	Adopted proposal regarding UN/ECE regulation	44	04	S8	2014/36	2014/6/25		Child restraint systems	-Addition of B1 to the crash test for which an anti-rotation device is not used. -Change of operation extent of the load application device for turn over test.
3	Adopted proposal regarding UN/ECE regulation	51	02	S10	2014/44	2014/6/25		Noise	A revision to enable usage of both the new and the old ISO road surfaces.
4	Adopted proposal regarding UN/ECE regulation	54	00	S19	2014/47	2014/6/25		Pneumatic tyres (commercial vehicle)	-Addition of naming inch-size. -Error correction in the definition of tyres.
			R3	C2	2014/51	2014/6/25			Error correction.
5	Adopted proposal regarding UN/ECE regulation	75	00	S14	2014/48	2014/6/25		Pneumatic tyres (moped, motor cycle)	Clarification of the description regarding the high-speed test of tyres for two-wheel vehicles designed for maximum speeds above 240 km/h.
6	Adopted proposal regarding UN/ECE regulation	90	02	S2	2014/49	2014/6/25		Replacement brake lining assemblies	-Addition and clarification of descriptions regarding the application extent and the definition. -Error correction in the requirements for brake discs and brake drams in M and N categories. -Correction of expression of the formula in the requirements for brake discs and brake drams for O category.
7	Adopted proposal regarding UN/ECE regulation	101	01	S4	2014/42	2014/6/25		Emission of carbon dioxide and fuel consumption (passenger car)	Correction of the part regarding fuel properties for adjustment with EU regulation.

PAGETOP

---

Table of amended regulations (Sep. 2014).

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Agreement regarding UN/ECE regulation	101	01	S3	2013/113	2014/6/24	2014/6/10	Emission of carbon dioxide and fuel consumption (passenger car)	-Addition of requirements regarding mixed fuel such as hydrogen mixture. -Error correction regarding the calculation formula in the hydrogen consumption measurement method.
2	Adopted proposal regarding UN/ECE regulation	110	01	S2	2014/12	2014/3/12		Vehicles using CNG	-Addition of a regulation regarding the Bi-Fuel system. -Addition of "H1", "H2" or "H3" marks to the automatic cylinder valves. -Definition of the "commanded stop phase" (intermittent stop phase) in preparation for HV driving. -Requirements for the automatic cylinder valve regarding the commanded stop phases.
3	Agreement regarding UN/ECE regulation	129	00	S2	2013/110	2014/6/24	2014/6/10	Enhanced child restraint systems (ECRS)	-Addition of a definition of "Lap strap" -Addition of colour description to the warning label regarding permissible age by month for rearward facing CRS. -Addition of the top tether position to the marking for a rearward facing CRS. -Addition of requirements for a crotch strap. -Addition of assessment using high speed video imaging for judging if the lap belt is above the pelvis during the dynamic test. -Correction of EN numbers for toxity and incombustibility. -Addition of requirements for the support leg and the vehicle part supporting the support leg. regarding the i-Size child restraint system. -Addition of requirements for the ISO-FIX attachmentｓ. -Correction and addition of description regarding the roll-over test requirements. -Addition of a new measurement procedure for the ISOFIX attachment opening force. -Addition of dimensions of the seat, the seat cushions, the aluminum bottom-plate and the cover material.
4	Adopted proposal regarding UN/ECE regulation	129	00	S3	2014/33	2014/3/12			Addition of definition and test method for "infant carrier module".
5	Agreement regarding UN/ECE regulation	133	00		2013/125	2014/6/26	2014/6/17	Recyclability of motor vehicles	A new UN regulation regarding "recyclability rate".

PAGETOP

---

Table of amended regulations (Aug. 2014).

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

The data were revised. (August 1, 2014.)

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Adopted proposal regarding UN/ECE regulation	3	02	S15	2014/13	2014/3/12		Reflex reflectors	Detailed shape requirements shall be deleted.
2	Adopted proposal regarding UN/ECE regulation	6	01	S25	2014/14	2014/3/12		Direction indicators	-An interdependent lamp (a lamp marked Y) may be applied for a direction indicator. -Front as well as rear direction indicators may be activated sequentially.
3	Adopted proposal regarding UN/ECE regulation	7	02	S23	2014/15	2014/3/12		Front and rear position(side)lamps, stop lamps and end-outline marker lamps	-Clarification of the maximum luminous intensity requirements regarding the front position lamp. -Clarification of the maximum luminous intensity requirements in casea stop-lamp is reciprocally incorporated with a rear end-outline marker lamp.
4	Adopted proposal regarding UN/ECE regulation	10	05		2014/16	2014/3/12		Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility	Addition of a method of testing electromagnetic compatibility of charging units while the EV is charged.
5	Agreement regarding UN/ECE regulation	13	11	S10	2013/56	2014/3/3	2014/2/13	Braking	Addition of an application procedure for approval based on computer simulation for EVSC.
	Adopted proposal regarding UN/ECE regulation		11	S23	2014/3	2014/3/12			-Requirements for ACV （Automated connections between vehicles） shall be added as Annex22. -The number of the series to be referred to in R10 shall be changed.
6	Adopted proposal regarding UN/ECE regulation	18	03	S3	2014/7	2014/3/12		Protection against unauthorized use	The scope shall be changed.
7	Adopted proposal regarding UN/ECE regulation	19	04	S6	2014/17	2014/3/12		Front fog lamps	Error correction regarding tentative rules for the transient period.
					2013/75/ Add1	2014/3/12			Error correction regarding the luminous intensity requirements for Class F3 front fog lamp.
8	Adopted proposal regarding UN/ECE regulation	27	04		2014/18	2014/3/12		Warning triangles	-A type 2 advance-warning triangle shall be added. -The test method shall be updated.
9	Adopted proposal regarding UN/ECE regulation	41	04	S1	2014/2	2014/3/12		Noise (motor cycle)	The road surface for measuring the exhaust noise near the outlet shall be changed according to the new ISO.
10	Adopted proposal regarding UN/ECE regulation	46	03	S3	2014/8	2014/3/12		Rear-view mirrors	Correction of the rule regarding the approval.
			04	S1	2014/9	2014/3/12			-Clarification of the field of vision attainment of which shall be the proof of correct adjustment of indirect vision devices of Classes IV, V and Vi. -Prescription of requirements for an indirect vision device of Class V in case the field of vision required from Class V shall be attained by a combination of Classes V and VI.
	Agreement regarding UN/ECE regulation		03	S2	2013/9	2013/11/27	2014/11/3		Requirements for mirror housing shall be changed.
11	Adopted proposal regarding UN/ECE regulation	48	04	S13	2014/19	2014/3/12		Installation of lights	Front as well as rear direction indicators may be activated sequentially.
			05	S6	2014/20	2014/3/12			Front as well as rear direction indicators may be activated sequentially.
			06	S4	2014/21	2014/3/12			-Regarding the direction indicator equipped with the interdependent lamp (Y lamp) which was permitted according to the revision of R6, mounting requirements shall be added.. -Change of the vehicle's speed at which the high speed mode of AFS shall begin.
12	Adopted proposal regarding UN/ECE regulation	67	01	S14	2014/10	2014/3/12		Specific equipment of vehicles using LPG	Standards preparing for driving of HV shall be added.
13	Adopted proposal regarding UN/ECE regulation	74	01	S8	2014/23	2014/3/12		Installation of lights (moped)	Vehicles of L1 category may be provided with hazard warning signal function.
14	Agreement regarding UN/ECE regulation	95	03	S4	2013/108	2014/6/24	2014/6/10	Protection of the occupants in the event of a lateral collision	Clarification of protection requirements against electrical shock.
15	Adopted proposal regarding UN/ECE regulation	113	01	S3	2014/24	2014/3/12		Headlamps (with a symmetrical passing beam)	-Regarding the thermal resistance test, points and criteria of judgment shall be changed. -Judgment requirements for the wear proof test of plastic lens surface shall be added.
16	Agreement regarding UN/ECE regulation	115	00	S6	2013/115	2014/6/24	2014/6/10	LPG/CNG retrofit system	-The formula for fuel consumption calculation shall be corrected. -Adjustment with R83 and R101.
17	Agreement regarding UN/ECE regulation	117	02	S3	2013/7	2014/02	2013/11/3	The approval of tyres with regard to rolling sound emissions	Amendment regarding the temperature correction in the rolling resistance test.
			02	S4	2013/55	2014/02	2014/2/13		Consideration of the revision of ISO in the regulation regarding the road surface for the noise measurement test.
	Adopted proposal regarding UN/ECE regulation		02	S6	2013/66	2014/3/12			Revision of the wet grip test method.
	Agreement regarding UN/ECE regulation		02	C4	2014/5	2014/5/8	2014/3/12		Error correction.
			02	S5	2013/59	2014/6/24	2014/6/10		Revision regarding the snow grip test method for C3 tyres.
18	Agreement regarding UN/ECE regulation	123	01	S5	2013/95	2014/6/24	2014/6/10	AFS	Revision of COP requirements.
19	Agreement regarding UN/ECE regulation	128	00	S2	2013/96	2014/6/24	2014/6/10	LED	The ID code of the approval mark shall be changed from 2 units to 3 units.

PAGETOP

---

Table of amended regulations (Jul. 2014).

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Agreement regarding UN/ECE regulation	13H	00	S15	2013/57	2014/2/24	2013/2/13	Braking (M1)	The test method regarding the electric regenerative brake in HV and EV shall be changed.
2	Agreement regarding UN/ECE regulation	32		R1/C1	2009/52	2014/3/17	2009/6/24	Rear-end collision	Error correction.
3	Agreement regarding UN/ECE regulation	44	04	S7	2013/46	2014/2/27	2014/2/13	Child restraint systems	Revision regarding the ISOFIX locking mechanism.
			R3	C1		2014/3/31			Error correction.
4	Agreement regarding UN/ECE regulation	95	03	S3	2013/48	2014/2/13	2014/2/13	Protection of the occupants in the event of a lateral collision	A revision of the test method so that, in the case of vehicles equipped with an automatically activated door locking system, the doors shall be locked before the moment of impact and be unlocked after the impact.
			R1	C1		2014/2/13	-		Error correction.
5	Adopted proposal regarding UN/ECE regulation	123	01	S6	2014/25	2014/3/12		AFS	-From the luminous intensity requirements redundant test methods due to duplication shall be deleted. -Correction of the text part where a term "Principal passing beam" is erroneously referred to.

PAGETOP

---

Table of amended regulations (Jun. 2014).

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Adopted proposal regarding UN/ECE regulation	49	05	S6	2013/111	2013/11/13		Emissions of compression ignition and positive ignition engines	-Dual fuel engines shall be added. -An EUROVI formula shall be added regarding petrol engine vehicles.
			06	S2	2013/112	2013/11/13			Consideration of EUROVI requirements such as those for OBD, etc. regarding Dual fuel engines, CNG and LNG engines in R48.
					2013/112 /Corr.1	2013/11/13			Error correction.
2	Agreement regarding UN/ECE regulation	91	00	S15	2013/40	2013/12/2	2013/11/3	Side-marker lamps	- Unification of the rules of measuring the height from the ground for the sake of relaxation of visibility angle requirements.
3	Adopted proposal regarding UN/ECE regulation	123	01	S5	2013/95	2013/11/13		AFS	Revision of COP requirements.
4	Agreement regarding UN/ECE regulation	131	01		2011/93 +Amend.1	2014/2/10	2014/1/26	Advanced emergency braking systems (AEBS)	A new regulation regarding the braking system for mitigating the damage by collision..
			01	S1	2013/60	2014/2/27	2014/2/13		A revision for carrying out the test of damage mitigating braking system with a moving target.

PAGETOP

---

Table of amended regulations (May 2014).

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Agreement regarding UN/ECE regulation	3	02	S14	2013/13	2013/12/2	2013/11/3	Reflex reflectors	Amendment according to the revision of some requirements for the geometric visibility angle in R48.
2	Agreement regarding UN/ECE regulation	9	07		2013/2	2013/12/2	2013/11/3	Noise (Three-Wheeled Vehicles)	Adjustment with the test method prescribed in R41-04.
3	Agreement regarding UN/ECE regulation	60	00	S4	2013/10	2013/12/2	2013/11/3	Driver operated controls(moped, motor cycle)	Adjustment with GTR12.
4	Agreement regarding UN/ECE regulation	63	02		2013/4	2013/12/2	2013/11/3	Noise (Moped)	Adjustment with the test method prescribed in R41-04.
5	Agreement regarding UN/ECE regulation	77	00	S16	2013/39	2013/12/2	2013/11/3	Parking lamps	Unification of the standards for measuring the height from the ground, of which purpose is to relax visibility angle requirements.
6	Adopted proposal regarding UN/ECE regulation	107	04	S3	2013/98	2013/11/13		Category m2 or m3 vehicles with regard to their general construction	Correction regarding the position of installation of an emergency opening switch for a door which is usually activated by power.
			05	S1	2013/99	2013/11/13			Clarification of rules regarding accommodation of prams and pushchairs.
			06		2013/100	2013/11/13			-Overnight locking system: A rule for the case that a security locking system for the night is left locked during driving. -Safety sign for operation of emergency exit(s): The pictogram indicating the operation procedure of the emergency exit(s)shall be located and orientated so as to be easily understood. -Escape hatches: Improvement regarding the number and the opening dimensions. -Fitting requirements for emergency lighting system: Illuminance, duration of lighting and location.
7	Adopted proposal regarding UN/ECE regulation	110	01	S1	2013/101	2013/11/13		Vehicles using CNG	Addition of LNG.
8	Adopted proposal regarding UN/ECE regulation	128	00	S2	2013/96	2013/11/13		LED	The ID code of the approval mark shall be changed from 2 units to 3 units.
9	Agreement regarding UN/ECE regulation		00	S1	2013/25	2013/11/27	2013/11/3		Addition of a new LED light source.
10	Adopted proposal regarding UN/ECE regulation	129	00	S2	2013/110	2013/11/13		Enhanced child restraint systems (ECRS)	-Addition of a definition of "Lap strap" -Addition of colour description to the warning label regarding permissible age by month for rearward facing CRS. -Addition of the top tether position to the marking for a rearward facing CRS. -Addition of requirements for a crotch strap. -Addition of assessment using high speed video imaging for judging if the lap belt is above the pelvis during the dynamic test. -Correction of EN numbers for toxity and incombustibility. -Addition of requirements for the support leg and the vehicle part supporting the support leg. regarding the i-Size child restraint system. -Addition of requirements for the ISO-FIX attachments. -Correction and addition ob description regarding the roll-over test requirements. -Addition of a new measurement procedure for the ISOFIX attachment opening force. -Addition of dimensions of the seat, the seat cushions, the aluminum bottom-plate and the cover material.
11	Agreement regarding UN/ECE regulation		00	S1	2013/37	2014/2/10	2014/1/26		Addition of a dynamic test by means of a sled.

PAGETOP

---

Table of amended regulations (Apr. 2014).

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Agreement regarding UN/ECE regulation	7	02	S22	2013/15	2013/11/27	2013/11/3	Front and rear position (side) lamps, stop lamps and end-outline marker lamps	-Amendment according to the revision of some requirements for the geometric visibility angle in R48. -Amendment to relax the minimum luminous intensity requirements for stop lamps and auxiliary stop lamps only by night.
2	Agreement regarding UN/ECE regulation	16	06	S4	2013/43	2014/2/24	2014/2/13	Safety belts	Regarding an emergency locking retractor with multiple sensors including a strap sensor, the minimum acceleration which, through activation of the strap sensor, causes belt locking, shall be enhanced.
3	Adopted proposal regarding UN/ECE regulation	19	03	S4	2013/74	2013/11/13		Front fog lamps	Correction of the list of luminous intensity requirements..
	Agreement regarding UN/ECE regulation		04	S5	2013/16	2013/12/2	2013/11/3		Amendment to apply the measurement of the cutoff quality, in case that visual aim does not lead to correct results, just as R98 and R112.
4	Agreement regarding UN/ECE regulation	29	03	S1	2013/45	2014/2/24	2014/2/13	Cab of commercial vehicles	Addition of extent of movement of test manikin legs.
			02	S2	2013/44	2014/2/24	2014/2/13		Adjustment of test manikin with 03 series.
5	Adopted proposal regarding UN/ECE regulation	37	03	S42	2013/78	2013/11/13		Filament lamps	-Addition of bulbs for signal lamps. -The ID code of the approval mark shall be changed from 2 units to 3 units.
	Agreement regarding UN/ECE regulation		03	S41	2013/17	2013/11/27	2013/11/3		-Introduction of an amber lamp with double filament PY21/5W. -Error correction.
6	Agreement regarding UN/ECE regulation	48	06	C1	2013/28	2013/8/27	2013/3/13	Installation of lights	Error correction.
			06	S1	2012/73 +Corr.1 +2012/74	2013/8/6	2013/7/15		-A part of sentences shall be deleted for transfer of LED module requirements to R112. - Addition of definition of ”Fixed (open) position of a movable component". -Correction of mounting requirements for retro-reflectors. -Deletion of a part of sentences from tell-tale requirements for direction indicators with an aim at adjustment with R121. -Addition of definition of a goniometer. -Clarification that the voltage control circuit may be located within the headlamp body. -Revision of rules for the angle of reference axis regarding the geometric visibility of any back-up lamp. -Error correction.
	Adopted proposal regarding UN/ECE regulation		04	S12	2013/80	2013/11/13			-The lower limit of the mounting height of front position lamp shall be lowered. -Clarification that non-replaceable light source(s) shall be exempted from requirements for light source replacement. -Error correction.
			05	S5	2013/81	2013/11/13			-The lower limit of the mounting height of the front position lamp shall be lowered. -Clarification that non-replaceable light source(s) shall be exempted from requirements for light source replacement. -Error correction.
			06	S3	2013/82	2013/11/13			-The lower limit of the mounting height of the front position lamp shall be lowered. -Clarification that non-replaceable light source(s) shall be exempted from requirements for light source replacement. -Error correction. -Provisional rules for a transient period shall be simplified. -A visual tell-tale for indicating a failure is not required in case the failure of any one LED module causes all of the LED modules composing the LED headlamp to stop emitting light. -ANNEX10 shall be deleted and, providing for modification in the future, "Reserved" shall be added. -Reference to R31 shall be deleted.
	Agreement regarding UN/ECE regulation		06	S2	2013/22	2013/11/27	2013/11/3		-Addition of conditions of operation to the requirement that the automatic control of the main-beam shall be possible to switch off manually at any time. -Clarification of lighting conditions for vehicles to be detected by the sensor system. -Retro-reflectors shall be deleted from the object of detection by the sensor system. -Deletion of the "1cd requirement within the visibility angle" for the passing beam and the front fog lamp. -Unification of the rules of measuring the height from the ground for the sake of relaxation of visibility angle requirements for direction indicator lamps, position lamps and stop lamps.
7	Agreement regarding UN/ECE regulation	79	01	S4	2013/58	2014/2/24	2014/2/13	Steering equipment	Amendment regarding the performance to be attained by the braking system as well as regarding the test speed in case the steering equipment and the braking system have an energy source in common.
8	Agreement regarding UN/ECE regulation	94	02	S4	2013/47	2014/2/24	2014/2/13	Protection of the occupants in the event of a frontal collision	A revision of the test method so that, in case of vehicles equipped with an automatic door locking system, the doors shall be locked before the moment of impact and be unlocked after the impact.
9	Adopted proposal regarding UN/ECE regulation	99	00	S9	2013/91	2013/11/13		Gas-discharge light sources	The ID code of the approval mark shall be changed from 2 units to 3 units.
10	Adopted proposal regarding UN/ECE regulation	103	00	S4	2013/114	2013/11/13		Replacement catalytic converters	Consideration of EURO6.
11	Adopted proposal regarding UN/ECE regulation	117	02	S5	2013/59	2013/11/13		The approval of tyres with regard to rolling sound emissions	Revision regarding the snow grip test method for C3 tyres.
12	Agreement regarding UN/ECE regulation	121	R1	A3/C1	2013/118	2014/12/20	2013/11/13	The location and identification of hand controls,tell-tales and indicators	Error correction.

PAGETOP

---

Table of amended regulations (Mar. 2014).

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Adopted proposal regarding UN/ECE regulation	5	03		2013/70	2013/11/13		Sealed beam headlamps	Amendment to make Contracting Parties cease to grant approvals according to this Regulation.
2	Agreement regarding UN/ECE regulation	6	01	S24	2013/14	2013/11/27	2013/11/3	Direction indicators	-Amendment according to the revision of some requirements for the geometric visibility angle in R48. -Amendment to remove an overlap among categories.
3	Adopted proposal regarding UN/ECE regulation	12	04	S3	2013/102	2013/11/13		Steering mechanism	Clarification of protection requirements against electrical shock.
4	Adopted proposal regarding UN/ECE regulation	14	07	S5	2013/103	2013/11/13		Safety belt anchorages	-Clarification of understanding regarding the location of ISOFIX. -An exemption rule for vehicles not intended for use by children.
5	Adopted proposal regarding UN/ECE regulation	16	06	S5	2013/104	2013/11/13		Safety belts	The warning label for the case that CRS is in use shall be changed.
6	Adopted proposal regarding UN/ECE regulation	17	08	S2	2013/105	2013/11/13		Seats	Clarification of requirements for folding seats.
7	Adopted proposal regarding UN/ECE regulation	31	03		2013/77	2013/11/13		Halogen sealed beam headlamps	An amendment to make Contracting Parties cease to grant approvals according to this Regulation.
8	Agreement regarding UN/ECE regulation	38	0	S16	2012/71	2013/8/20	2013/7/15	Rear fog lamps	Amendment according to introduction of the new UN regulation covering the use of LED light sources.
9	Agreement regarding UN/ECE regulation	43	R3	C2	2013/116	2013/12/18	-	Uniform provisions concerning the approval of safety glazing materials	Error correction.
			01	S2	2013/8	2013/11/27	2013/11/3		"Double glazing" shall be replaced with "multiple grazing".
10	Agreement regarding UN/ECE regulation	45	01	S8	2013/19	2013/11/27	2013/11/3	Headlamp cleaners	Clarification of the number of samples needed for the head lamp cleaner test.
11	Agreement regarding UN/ECE regulation	50	00	S16	2012/75	2013/8/20	2013/7/15	Lights (moped, motor cycle)	-Ｔhe new regulation regarding LED light sources may be applied for replaceable LED light sources. -The inward visibility angle requirement for a pair of front position lamps shall be mitigated to 20°
12	Agreement regarding UN/ECE regulation	51	02	S9	2013/3	2013/11/27	2013/11/3	Noise	Consideration of the content of revision regarding the ISO test method.
13	Agreement regarding UN/ECE regulation	54	R3	C1	2013/130	2014/12/18	-	Pneumatic tyres(commercial vehicle)	Error correction.
14	Adopted proposal regarding UN/ECE regulation	67	01	S13	2013/97	2013/11/13		Specific equipment of vehicles using lpg	-Regarding the treatment of high pressure rubber hoses of Class 1 as an assembly, definition and approval test method shall be added. -Rationalization of the approval procedure.
	Agreement regarding UN/ECE regulation		01	S12	2013/11	2013/11/27	2013/11/3		-Addition of Class 0 to the working pressure classification of the power supply bushing, -Addition of Class 0 to classification regarding burst pressure of high pressure hoses. -Addition of Class 0 and Class 3 to the outer leakage regarding components.
15	Agreement regarding UN/ECE regulation	83	06	C3	2013/131	2013/12/20	2013/11/13	The emission of pollutants according to engine fuel requirements	Error correction.
16	Adopted proposal regarding UN/ECE regulation	95	03	S4	2013/108	2013/11/13		Protection of the occupants in the event of a lateral collision	Clarification of protection requirements against electrical shock.
17	Adopted proposal regarding UN/ECE regulation	100	01	S3	2013/109	2013/11/13		Electric power train	Addition of an exemption rule of isolation resistance requirements for the case that a high voltage circuit including low voltage parts （≦DC60Vor≦AC60） is connected with the chassis of an electric powered vehicle.
	Adopted proposal regarding UN/ECE regulation		02	S1	2013/135	2013/11/13			Addition of an exemption rule of isolation resistance requirements for the case that a high voltage circuit including low voltage parts （≦DC60Vor≦AC60）.
18	Adopted proposal regarding UN/ECE regulation	101	01	S3	2013/113	2013/11/13		Emission of carbon dioxide and fuel consumption (passenger car)	-Addition of requirements for fuel mixtures, hydrogen, etc. -Error correction regarding the formula in the hydrogen consumption measurement method.
	Agreement regarding UN/ECE regulation		01	S1	2012/46	2013/8/6	2013/7/15		Adjustment with the U. S. regulation.
			01	S2	2012/108	2013/8/6	2013/7/15		Adjustment with the provisional rules for a transient period of R83 and R101.

PAGETOP

---

Table of amended regulations (Feb. 2014).

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Agreement regarding UN/ECE regulation	4	00	S16	2013/63	2013/8/19	2013/7/15	Rear registration plate lamps	-Ｔhe new regulation regarding LED light sources may be applied for replaceable LED light sources. -Error correction in a figure illustrating a case of marking.
2	Agreement regarding UN/ECE regulation	23	00	S19	2012/68	2013/8/20	2013/7/15	Reversing and maneuvering lamps	-Ｔhe new regulation regarding LED light sources may be applied for replaceable LED light sources. -Adjustment regarding the minimum size of approval mark. Correction of alphabets "AR" in the marking example as they were incorrectly shaped.
3	Adopted proposal regarding UN/ECE regulation	94	01	S5	2013/106	2013/11/13		Protection of the occupants in the event of a frontal collision	Regarding vehicles equipped with a frontal protection air bag and not provided with a sun visor nor a roof, the location of the caution label for a case using the rearward facing CRS shall be corrected.
4	Adopted proposal regarding UN/ECE regulation		02	S5	2013/107	2013/11/13			-Regarding vehicles equipped with a frontal protection air bag and not provided with a sun visor nor a roof, the location of the caution label for a case using the rearward facing CRS shall be corrected. -Clarification of protection requirements against electrical shock for the coupling system of charging equipment, which is not energized during driving conditions
5	Agreement regarding UN/ECE regulation	110	01		2012/92	2013/8/19	2013/7/15	Vehicles using CNG	Addition of pressure relief device and fuel rail.

PAGETOP

---

Table of amended regulations (Jan. 2014).

*S: Amendment number, C: Error correction number.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Agreement regarding UN/ECE regulation	46	04		2012/87	2013/8/19	2013/7/15	Rear-view mirrors	Addition of a new mirror to large vehicles.
2	Agreement regarding UN/ECE regulation	53	01	S14	2012/76	2013/8/7	2013/7/15	Installation of lights (motor cycle)	-The inward visibility angle requiremqnt for a pair of front position lamps shall be mitigated to 20° -The lamp approved according to R113 may be added as a part of the light source unit to passing beam on certain conditions.
3			01	S13 /C1	2013/18	2013/8/27	2013/6/26		Error correction.
4	Agreement regarding UN/ECE regulation	83	06	S3	2012/104, 2012/105	2013/8/6	2013/7/15	The emission of pollutants according to engine fuel requirements	-Revision of the definition regarding "gas vehicle". -Adjustment with EU Directive.
5	Agreement regarding UN/ECE regulation	85	00	S6	2012/106	2013/8/21	2013/7/15	Measurement of engine power	An article regarding dual fuel engines shall be added.
6	Agreement regarding UN/ECE regulation	87	00	S16	2012/78	2013/8/20	2013/7/15	Daytime running lamps	-Ｔhe new regulation regarding LED light sources may be applied for replaceable LED light sources. -The limitation of trade mark on the lens surface shall be removed in adjustment with other regulations.
7	Agreement regarding UN/ECE regulation	94	02	S3	2012/99	2013/8/20	2013/7/15	Protection of the occupants in the event of a frontal collision	-Revision of the definition of "exposed conductive part" regarding electric vehicles. -An abbreviation for "Rechargeable energy storage system shall clearly be defined.
8	Agreement regarding UN/ECE regulation	115	00	S5	2012/109	2013/8/21	2013/7/15	LPG/CNG retrofit system	-Correction of the definition of "mono-fuel" and "bi-fuel". -Correction of the definition of "LPG mono-fuel", "LPG bi-fuel" and "LPG dual-fuel" engines. -Correction of the definition of "CNG mono-fuel", "CNG bi-fuel" and "CNG dual-fuel" engines. -Addition of emission test method for petrol and LPG bi-fuel engine. -Addition of emission test method for petrol and CNG bi-fuel engine. -Addition of petrol and CNG bi-fuel emission test method with petrol direct injection engines. -Clarification of requirements for the emission test.
9	Adopted proposal regarding UN/ECE regulation		00	S6	2013/115	2013/11/13			-The formula for fuel consumption calculation shall be corrected. -Adjustment with R83 and R101.

PAGETOP

---

Table of amended regulations (Dec. 2013).

*S: Amendment number, C: Error correction number.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Agreement regarding UN/ECE regulation	14	7	S4	2012/42, 2012/97	2013/8/6	2013/7/15	Safety belt anchorages	-To the description about the definition of anchorage angle explanation shall be added regarding its understanding in case vehicles are equipped with seat slide mechanism. -The term "adjusting device" shall be replaced with "adjusting system" regarding the safety belt anchorage location for front seat of M1 vehicles and rear seat as well as special front and rear seats of vehicles other than M1categories. -To the definition of safety belt anchorage requirements for adjustable anchorage in M2 and M3 vehicles shall be added. -According to adoption of the new CRS regulation i-size child restraint system shall be added to the child restraint systems, and relevant requirements for strength and installation shall also be prescribed.
2	Agreement regarding UN/ECE regulation	16	6	S3	2012/43	2013/8/6	2013/7/15	Safety belts	-Definition of the seating position regarding the i-size child restraint system. -The vehicle manufacturer shall identify within the handbook each seating position which is suitable for the accommodation of an i-size child restraint system. -Location requirements for vehicle floor to support the support leg.
			R7	C2		2013/11/5			Error correction.
3	Agreement regarding UN/ECE regulation	26	3	S2	2012/86	2013/8/19	2013/7/15	External projections	-The requirement to round edges by 2.5mm shall not be applied to front, nor rear bumpers. -Addition of definition of "Revision" and "Extension".
4	Agreement regarding UN/ECE regulation	43	R3	C1		2013/1/23	-	Uniform provisions concerning the approval of safety glazing materials	Error correction.
5	Agreement regarding UN/ECE regulation	49	6	S1	2012/103 +Corri.1	2013/8/6	2013/7/15	Diesel emission	Paragraphs regarding "Dual-fuel" shall be inserted as a new annex.
6	Agreement regarding UN/ECE regulation	112	1	S4	2012/82	2013/8/6	2013/7/15	Headlamps (with an asymmetrical passing beam)	-Clarification of conditions for types being identical with each other. -Adjustment regarding the minimum size of approval mark. -In case a LED headlamp is applied for approval as a LED module, an ID code for LED module may not be marked. -Revision regarding the points for judging the stability of photometric performance of LED Modules. -Addition of requirements regarding plastic lens surface to the requirements for testing mechanical deterioration. -A voltage control gear may be located within the headlamp body within the limits as defined in R48. However, it shall remain removed during the test for approval. It shall clearly be shown that the electronic light source control gear, which is referred to in the requirements for using LED, is identical with the one used for operating the LED module.
7	Agreement regarding UN/ECE regulation	113	1	S2	2012/83	2013/8/6	2013/7/15	Headlamps (with a symmetrical passing beam)	-Deletion of "Change of lens materials and coating materials" from those items to be treated as separate type(s). -Approval marks shall be changed. -Conditions for admitting additional light sources shall be added.
8	Agreement regarding UN/ECE regulation	117	2	S2	2012/54, 2012/55	2013/8/6	2013/7/15	The approval of tyres with regard to rolling sound emissions	-The wet grip test method shall be corrected for C1 tyres. -A snow grip test method shall be added for C3 tyres. -An optional calculation formula shall be added with regard to the deceleration method.
9	Agreement regarding UN/ECE regulation	131	0		2011 /92+2011 /92 /Amend.1	2013/8/7	2013/7/9	Advanced emergency braking systems (AEBS)	A new regulation regarding the braking system for mitigating the damage by collision.
10	Adopted proposal regarding UN/ECE regulation		1		2011/93	2012/11/14			A revision for carrying out the test of damage mitigating braking system with a moving target.
					2011/93/Amend1	2012/11/14			A revision for carrying out the test of damage mitigating braking system with a moving target.
			1	S1	2013/60	2013/6/26			Increase of categories the regulation shall be applied for.
11	Agreement regarding UN/ECE regulation	125	1		2012/95	2013/8/19	2013/7/15	The forward field of vision	Addition of a requirement that a 1,200 mm tall cylindrical object situated 2,000 mm in front of the vehicle shall be visible.
12	Agreement regarding UN/ECE regulation	127	0	C1		2013/10/16	-	Pedestrian safety	Error correction.

PAGETOP

---

Table of amended regulations (Nov. 2013).

*S: Amendment number, C: Error correction number.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Agreement regarding UN/ECE regulation	3	02	S13	2012/62	2013/8/6	2013/7/15	Reflex reflectors	Adjustment regarding marking requirements.
2	Agreement regarding UN/ECE regulation	6	01	S23	2012/64	2013/8/6	2013/7/15	Direction indicators	Amendment according to introduction of a new UN regulation regarding the usage of LED.
3	Agreement regarding UN/ECE regulation	7	02	S21	2012/65	2013/8/6	2013/7/15	Front and rear position(side)lamps, stop lamps and end-outline marker lamps	-The new regulation regarding LED light sources may be applied for replaceable LED light sources. -Amendment regarding the approval mark.
4	Agreement regarding UN/ECE regulation	10	04	S2	2012/66	2013/8/6	2013/7/15	Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility	Correction of provisional regulations for transitional period.
5	Agreement regarding UN/ECE regulation	12	04	S2	2012/96	2013/8/6	2013/7/15	Steering mechanism	The definition of passenger compartment for the sake of electric safety assessment shall be corrected.
6	Agreement regarding UN/ECE regulation	13	R7	C1	2013/26	2013/8/27	2013/3/13	Braking	Error correction.
7	Agreement regarding UN/ECE regulation	13H	R2	C3	2013/62	2013/6/26		Braking (m1)	Error correction.
8	Agreement regarding UN/ECE regulation	19	04	S4	2012/67	2013/8/6	2013/7/15	Front fog lamps	-Change of definition of the type of lamps. -Judgment of conformity shall be corrected in consideration of practical usage.
9	Agreement regarding UN/ECE regulation	31	02	S8	2012/69	2013/8/6	2013/7/15	Halogen sealed beam headlamps	Clarification of conditions for types being identical with each other.
10	Agreement regarding UN/ECE regulation	37	03	S40	2012/70	2013/8/6	2013/7/15	Filament lamps	A proposal to transfer 10 sorts of lamps to group 3 (for replacement use only).
11	Agreement regarding UN/ECE regulation	45	01	S7	2012/72	2013/8/6	2013/7/15	Headlamp cleaners	Adjustment regarding the minimum size of approval mark.
12	Agreement regarding UN/ECE regulation	58	02	S3	2012/88	2013/8/6	2013/7/15	Rear underrun protection	Clarification of the rule regarding the width of RUPD.
13	Agreement regarding UN/ECE regulation	61	00	S2	2012/89	2013/8/6	2013/7/15	External projections(commercial vehicle)	The Annex defining the extent of the trichromatic coordinates shall be deleted.
14	Agreement regarding UN/ECE regulation	67	01	S11	2012/90	2013/8/6	2013/7/15	Specific equipment of vehicles using lpg	-The naming "isolation degree class" shall be replaced with "protection degree class", and the ISO NO. to be referred to shall be changed. -Reference to standard ISO 1431/1 -1 shall additionally be required. -Requirements for preconditioning of test pieces for elongation test shall be added. -Cracking of the test pieces shall not be allowed. -Reference standard for the bending test shall be renewed.
15	Agreement regarding UN/ECE regulation	77	00	S15	2012/77	2013/8/6	2013/7/15	Parking lamps	The new regulation regarding LED light sources may be applied for replaceable LED light sources.
16	Agreement regarding UN/ECE regulation	91	00	S14	2012/79	2013/8/6	2013/7/15	Side-marker lamps	The new regulation regarding LED light sources may be applied for replaceable LED light sources.
17	Agreement regarding UN/ECE regulation	95	03	S2	2012/100	2013/8/6	2013/7/15	Protection of the occupants in the event of a lateral collision	-Revision of the definition of exposed conductive part regarding electric vehicles. -An acronym for "Rechargeable Energy Storage System shall clearly be defined.
18	Agreement regarding UN/ECE regulation	97	01	S7	2012/91	2013/8/6	2013/7/15	Vehicle alarm systems	Provisions referring to R10 shall be revised.
19	Agreement regarding UN/ECE regulation	98	01	S4	2012/80	2013/8/6	2013/7/15	Gas-discharge headlamps	-Change of definition of the type of lamps. -Adjustment regarding the minimum size of approval mark. -Revision regarding points of judgment of the stability of photometric performance of LED Modules. -Correction of requirements for testing mechanical deterioration of plastic lens surface.
20	Agreement regarding UN/ECE regulation	99	00	S8	2012/81	2013/8/6	2013/7/15	Gas-discharge light sources	The numbers of data sheets named in accordance with IEC Publication 60061 shall be updated.
21	Agreement regarding UN/ECE regulation	100	01	S2	2012/101	2013/8/12	2013/7/15	Electric power train	-The definition of passenger compartment for the sake of electric safety assessment shall be corrected. -REESS(Rechargeable energy storage system) shall be added.
			02		2012 /102+2012 /102/Corr.1
22	Agreement regarding UN/ECE regulation	116	00	S4	2012/93	2013/8/6	2013/7/15	Protection against unauthorized use	The series number of R10 to be referred to shall be changed.
23	Agreement regarding UN/ECE regulation	119	01	S2	2012/84	2013/8/6	2013/7/15	Cornering lamps	-The new regulation regarding LED light sources may be applied for replaceable LED light sources. -Clarification of luminous intensity requirements.
24	Agreement regarding UN/ECE regulation	121	00	S8	2012/94	2013/8/6	2013/7/15	The location and identification of hand controls,tell-tales and indicators	It shall be prescribed as a general requirement that, in case an automatic function is added, alphabets "A" or "AUTO" may be added to each relevant symbol mark.
25	Agreement regarding UN/ECE regulation	123	01	S4	2012/85	2013/8/6	2013/7/15	Afs	-Change of definition of the type of lamps. -Adjustment regarding the minimum size of approval mark. -Revision regarding points of judgment of the stability of photometric performance of LED modules. -According to addition of the definition of goniometer to R48, its definition shall be deleted from R123.
26	Agreement regarding UN/ECE regulation	129	00		2012 /53+2012 /53 /Corr.1	2013/8/7	2013/7/9	Enhanced child restraint systems (ecrs)	A regulation regarding the new child restraint system.
			00	C1	2013/31	2013/8/27	2013/7/9		Error correction.
	Adopted proposal regarding UN/ECE regulation		00	S1	2013/37	2013/3/13			Addition of a dynamic test by means of a sled.

PAGETOP

---

Table of amended regulations (Oct. 2013).

*S: Amendment number, C: Error correction number.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Adopted proposal regarding UN/ECE regulation	44	04	S7	2013/46	2013/6/26		Child Restraint Systems	-Addition of a definition of "Lap strap" -Addition of description of necessity for a crotch strap for all forward-facing group I restraints incorporating an integral harness belt system. -Addition of requirements for restraining pelvis regarding the lap strap. -Requirement of using high speed video imaging for assessment of the status of pelvis restraint during a dynamic test. -Strengthening the requirements regarding the roll-over test. -Addition of requirements for Load application device to Annex23.
2	Agreement regarding UN/ECE regulation		04	S6	2012/98	2013/8/6	2013/7/15		Revision regarding the ISOFIX locking mechanism.
3	Agreement regarding UN/ECE regulation	130	00		2011 /78+2011/89+2011 /91	2013/8/7	2013/7/9	Lane Departure Warning Systems (LDWS)	A new regulation regarding the Lane Departure Warning System (LDWS).

PAGETOP

---

Table of amended regulations (Sep. 2013).

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Adopted proposal regarding UN/ECE regulation	9	07		2013/2	2013/3/13		Noise (Three-wheeled Vehicles)	Adjustment with the test method in R41-04.
2	Adopted proposal regarding UN/ECE regulation	13H	00	S15	2013/57	2013/6/26		Braking (M1)	The test method regarding the electric regenerative brake in HV and EV shall be changed.
			R2	C3	2013/62	2013/6/26			Error correction.
3	Adopted proposal regarding UN/ECE regulation	16	06	S4	2013/43	2013/6/26		Safety Belts	Regarding an emergency locking retractor with multiple sensors including a strap sensor, the minimum acceleration which, through activation of the strap sensor, causes belt locking, shall be increased.
4	Adopted proposal regarding UN/ECE regulation	29	02	S2	2013/44	2013/6/26		Cab of Commercial Vehicles	Adjustment of the maniquin with 03 series.
			03	S1	2013/45	2013/6/26			Addition of extent of movement of maniquin legs.
5	Adopted proposal regarding UN/ECE regulation	53	01	S13 /C1	2013/18	2013/6/26		Installation of Lights (Motor Cycle)	Error correction.
			01	S14 /C1	2013/29	2013/3/13			Error correction.
6	Agreement regarding UN/ECE regulation	54	00	S18	2012/49	2013/3/26	2013/1/27	Pneumatic Tyres (Commercial Vehicle)	-Addition of definition of the tyre categories introduced according to the revision of R117. -Addition of marking requirements necessary for the new tyre categories.
7	Adopted proposal regarding UN/ECE regulation	63	02		2013/4	2013/3/13		Noise (Moped)	Adjustment with the test method in R41-04.
8	Adopted proposal regarding UN/ECE regulation	79	01	S4	2013/58	2013/6/26		Steering Equipment	Amendment regarding the performance to be attained by the braking system as well as regarding the test speed in case the steering equipment and the braking system have an energy source in common.
9	Adopted proposal regarding UN/ECE regulation	94	02	S4	2013/47	2013/6/26		Protection of the Occupants in the Event of a Frontal Collision	A revision of the test method so that, in the case of vehicles equipped with an automatically activated door locking system, the doors shall be locked before the moment of impact and be unlocked after the impact.
10	Adopted proposal regarding UN/ECE regulation	95	03	S3	2013/48	2013/6/26		Protection of the Occupants in the Event of a Lateral Collision	A revision of the test method so that, in the case of vehicles equipped with an automatically activated door locking system, the doors shall be locked before the moment of impact and be unlocked after the impact.
11	Adopted proposal regarding UN/ECE regulation	117	02	S4	2013/55	2013/6/26		The Approval of Tyres with Regard to Rolling Sound Emissions	Consideration of the revision of ISO in the regulation regarding the road surface for the noise measurement test.
12	Adopted proposal regarding UN/ECE regulation	128	00	S1	2013/25	2013/3/13		LED	Addition of new LED light sources.

PAGETOP

---

Table of amended regulations (Aug. 2013).

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Adopted proposal regarding UN/ECE regulation	13	R7	C1	2013/26	2013/3/13		Braking	Error correction.
			11	S10	2013/56	2013/6/26			Addition of an application procedure based on computer simulations for EVSC.
2	Adopted proposal regarding UN/ECE regulation	37	03	S40	2012/70	2012/11/14		Filament lamps	A proposal to transfer 10 sorts of lamps to group 3 (for replacement use only).
3	Agreement regarding UN/ECE regulation		03	S38	2011/97	2012/8/15	2012/7/26		Old lamps shall phase out.
			03	S39	2012/9	2012/12/6	2012/11/18		Introduction of H17 lamps.
4	Adopted proposal regarding UN/ECE regulation		03	S41	2013/17	2013/3/13			-Introduction of an amber lamp with double filament PY21/5W. -Error correction.
5	Adopted proposal regarding UN/ECE regulation	48	04	S11	2013/20	2013/3/13		Installation of lights	-Addition of conditions of operation to the requirement that the automatic control of the main-beam shall be possible to switch off manually at any time. -Clarification of lighting conditions for vehicles to be detected by the sensor system. -Retro-reflectors shall be deleted from the object of detection by the sensor system. -Deletion of the "1cd requirement within the visibility angle" for the passing beam and the front fog lamp.
			05	S4	2013/21	2013/3/13			-Addition of conditions of operation to the requirement that the automatic control of the main-beam shall be possible to switch off manually at any time. -Clarification of lighting conditions for vehicles to be detected by the sensor system. -Retro-reflectors shall be deleted from the object of detection by the sensor system. -Deletion of the "1cd requirement within the visibility angle" for the passing beam and the front fog lamp.
			06	S2	2013/22	2013/3/13			-Addition of conditions of operation to the requirement that the automatic control of the main-beam shall be possible to switch off manually at any time. -Clarification of lighting conditions for vehicles to be detected by the sensor system. -Retro-reflectors shall be deleted from the object of detection by the sensor system. -Deletion of the "1cd requirement within the visibility angle" for the passing beam and the front fog lamp. -Unification of the rules of measuring the height from the ground for the sake of relaxation of visibility angle requirements for direction indicator lamps, position lamps and stop lamps.
			04	S10/C1	2013/28	2013/3/13			Error correction.
			05	S3/C1		2013/3/13			Error correction.
			06	C1		2013/3/13			Error correction.
6	Adopted proposal regarding UN/ECE regulation	51	02	S9	2013/3	2013/3/13		Noise	Consideration of the content of revision of the test method in ISO.
7	Adopted proposal regarding UN/ECE regulation	67	01	S12	2013/11	2013/3/13		Specific equipment of vehicles using lpg	-Class 0 shall be added to the working pressure classes of the power supply bushing. -Class 0 shall be added to the burst pressure of the high-pressure hose. -Class 0 and Class 3 shall be added to the external leakage test of component parts.
8	Adopted proposal regarding UN/ECE regulation	77	00	S16	2013/39	2013/3/13		Parking lamps	Unification of the rules of measuring the height from the ground for the sake of relaxation of visibility angle requirements for direction indicator lamps, position lamps and stop lamps.
9	Adopted proposal regarding UN/ECE regulation	87	00	S17	2013/23	2013/3/13		Daytime running lamps	-Addition of requirements regarding the Y lamp. -.In case of failure of any one light source in a single lamp containing more than one light source, the minimum luminous intensity requirements shall be relaxed.
10	Agreement regarding UN/ECE regulation	90	R3	C1		2013/2/13	2012/11/14	Replacement brake lining assemblies	Error correction.
			02	S1	2012/4	2012/12/6	2012/11/18		Clarification of the test methods, rules, etc.
			02	S1/C1		2013/3/26	2012/11/18		Error correction.
11	Adopted proposal regarding UN/ECE regulation	91	00	S15	2013/40	2013/3/13		Side-marker lamps	Unification of the rules of measuring the height from the ground for the sake of relaxation of visibility angle requirements.
12	Agreement regarding UN/ECE regulation	112	01	S3	2012/16	2013/1/9	2012/11/18	Headlamps (with an asymmetrical passing beam)	-Relaxation of the aiming test requirements. -Error correction regarding the Table UV. -Adjustment with R98 regarding the COP requirements. -Addition of the definition of light source module. -Error correction.
13	Agreement regarding UN/ECE regulation	117	02	S1	2012/2+2012/6	2012/12/6	2012/11/18	The approval of tyres with regard to rolling sound emissions	-The wet grip test method shall be corrected for C1 tyres. -A snow grip test method shall be added for C3 tyres. -An optional calculation formula shall be added with regard to the deceleration method.
14	Adopted proposal regarding UN/ECE regulation		02	S2	2012/54	2012/11/14			-The title shall be corrected. -The rules for snow tyres shall be devided in two groups. -A snow grip test with a vehicle shall be added for C2 tyres.
					2012/55	2012/11/14			-As a reference standard in case rims for rolling resistance test are not defined for C1 or C2 tyres, Annex 6 – Appendix 4 shall be added. -Error correction.
			02	S3	2013/7	2013/3/13			Amendment regarding the temperature correction in the rolling resistance test.
15	Adopted proposal regarding UN/ECE regulation	118	02	S1	2013/12	2013/3/13		The burning behaviour of materials used in the construction of certain categories of motor vehicles	-Revision regarding the partition wall in the compartment. -Materials inside and not more than 13mm above the surface of the interior compartments, materials of engine compartment and heater compartment shall fulfill the conditions Part II.
16	Adopted proposal regarding UN/ECE regulation	119	01	S3	2013/24	2013/3/13		Cornering lamps	Deletion of the "1cd requirement within the visibility angle".

PAGETOP

---

Table of amended regulations (Jul. 2013).

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Adopted proposal regarding UN/ECE regulation	3	02	S14	2013/13	2013/3/13		Reflex reflectors	Amendment according to the revision of some requirements for the geometric visibility angle in R48.
2	Adopted proposal regarding UN/ECE regulation	6	01	S24	2013/14	2013/3/13		Direction indicators	-Amendment according to the revision of some requirements for the geometric visibility angle in R48. -Amendment to remove overlap among categories.
3	Adopted proposal regarding UN/ECE regulation	7	02	S22	2013/15	2013/3/13		Front and rear position(side)lamps, stop lamps and end-outline marker lamps	-Amendment according to the revision of some requirements for the geometric visibility angle in R48. -Amendment to relax the minimum luminous intensity requirements for stop lamps and auxiliary stop lamps only by night.
4	Agreement regarding UN/ECE regulation	11	03	S3	2012/41	2013/3/7	2013/1/27	Door latches and hinges	-Clarification of the scope. -Clarification of the definition of back door.
5	Adopted proposal regarding UN/ECE regulation	19	04	S5	2013/16	2013/3/13		Front fog lamps	Amendment to apply the measurement of the cutoff quality, in the case that visual aim does not lead to correct results, just as R98 and R112.
6	Agreement regarding UN/ECE regulation	34	02	S4	2011/134+2011/135	2012/12/20	2012/7/26	Prevention of fire risks	-Information list of approval of fuel tanks shall be revised. -Addition of missing contents of revision, which does not mean correction of technical requirements.
			02	S5	2012/20	2012/12/6	2012/11/18		No charge dissipation system is required for fuel tanks designed for containing a fuel with a flash point less than, or equal to 55℃.
7	Adopted proposal regarding UN/ECE regulation	43	01	S2	2013/8	2013/3/13		Uniform provisions concerning the approval of safety glazing materials	"Double glazing" shall be replaced by "multiple grazing".
8	Adopted proposal regarding UN/ECE regulation	45	01	S8	2013/19	2013/3/13		Headlamp cleaners	Clarification of sample numbers required for headlamp cleaner test.
9	Adopted proposal regarding UN/ECE regulation	46	03	S2	2013/9	2013/3/13		Rear-view mirrors	Requirements for mirror housing shall be changed.
10	Adopted proposal regarding UN/ECE regulation	49	06	S1	2012/103	2012/11/14		Diesel emission	Paragraphs regarding "Dual-fuel" shall be inserted as a new annex.
					2012/103/Corr.1	2012/11/14			Error correction.
	Agreement regarding UN/ECE regulation		06		2012/45	2013/3/4	2013/1/27		Adjustment with Euro VI.
11	Adopted proposal regarding UN/ECE regulation	60	00	S4	2013/10	2013/3/13		Driver operated controls(moped, motor cycle)	Adjustment with Gtr 12.
12	Agreement regarding UN/ECE regulation	92	01		2012/5	2012/12/5	2012/11/18	Replacement silencing system(motor cycle)	Adjustment with the contents of R41.
13	Agreement regarding UN/ECE regulation	113	01		2011/104	2012/12/20	2012/7/26	Headlamps (with a symmetrical passing beam)	A revision to apply reference luminous flux at 13.2V.
			01	S1	2012/17	2012/12/20	2012/11/18		-LED light sources shall be admitted for Classes A and B. -Definition of light source module shall be added.
14	Adopted proposal regarding UN/ECE regulation		01	S2	2012/83	2012/11/14			-Deletion of "Change of lens materials and coating materials" from those items to be treated as separate type(s). -Approval marks shall be changed. -Conditions for admitting additional light sources shall be added.
15	Adopted proposal regarding UN/ECE regulation	125	01		2012/95	2012/11/14		The forward field of vision	Addition of a requirement that a 1,200 mm tall cylindrical object situated 2,000 mm in front of the vehicle shall be visible.
16	Agreement regarding UN/ECE regulation		00	S4	2011/138	2013/1/11	2012/7/26		A provision to eliminate the defroster/demister from visibility requirements.

PAGETOP

---

Table of amended regulations (Jun. 2013).

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Agreement regarding UN/ECE regulation	13	11	S9	2011/94+amend1+2012/3	2012/12/6	2012/11/18	Braking	-As Annex19 Part2, when applying the vehicle stability function for approval, the results from actual vehicle tests or computer simulations may be submitted. -For annex21 classification of vehicle types as well as conditions for simulation shall be clarified. -Clarification of requirements for the minimum braking performance.
2	Agreement regarding UN/ECE regulation	16	06	S2	2011/117	2012/10/2	2012/7/26	Safety belts	Strength and equipment requirements shall be prescribed according to additional application of side-facing seat for vehicles of M3 category.
3	Agreement regarding UN/ECE regulation		R7	C1		2012/11/5			Error correction.
4	Adopted proposal regarding UN/ECE regulation		06	S3	2012/43	2012/11/14			-Definition of the seating position regarding the i-size child restraint system. -The vehicle manufacturer shall identify within the handbook each seating position which is also suitable for the accommodation of an i-Size child restraint system. -Location requirements for vehicle floor to support the support leg.
5	Adopted proposal regarding UN/ECE regulation	83	06	S3	2012/104	2012/11/14		The emission of pollutants according to engine fuel requirements	Revision of the definition regarding "gas vehicle".
					2012/105	2012/11/14			Adjustment with EU Directive.
6	Agreement regarding UN/ECE regulation		R4	C1	2012/127	2013/2/13	2012/11/14		Error correction.
7	Adopted proposal regarding UN/ECE regulation	97	01	S7	2012/91	2012/11/14		Vehicle alarm systems	Revision of the part cited from R10.
8	Adopted proposal regarding UN/ECE regulation	99	00	S8	2012/81	2012/11/14		Gas-discharge light sources	The numbers of data sheets named in accordance with IEC Publication 60061 shall be updated.
9	Adopted proposal regarding UN/ECE regulation	101	01	S2	2012/108	2012/11/14		Emission of carbon dioxide and fuel consumption (passenger car)	Adjustment with the transitional provisions of R83 and R101.
10	Adopted proposal regarding UN/ECE regulation	110	01		2012/92	2012/11/14		Vehicles using CNG	Addition of pressure relief device and fuel rail.
11	Adopted proposal regarding UN/ECE regulation	115	00	S5	2012/109	2012/11/14		LPG/CNG retrofit system	-Correction of the definition of "mono-fuel" and "bi-fuel". -Correction of the definition of "LPG mono-fuel", "LPG bi-fuel" and "LPG dual-fuel" engines. -Correction of the definition of "CNG mono-fuel", "CNG bi-fuel" and "CNG dual-fuel" engines. -Addition of emission test method for petrol and LPG bi-fuel engine. -Addition of emission test method for petrol and CNG bi-fuel engine. -Addition of emission test method for petrol and CNG bi-fuel direct injection engine. -Clarification of requirements for the emission test.
12	Agreement regarding UN/ECE regulation	121	00	S7	2012/26	2013/1/7	2012/11/18	The location and identification of hand controls,tell-tales and indicators	Change of the colour of the tell-tale for headlamp as well as addition of new symbol mark(s).
13	Adopted proposal regarding UN/ECE regulation		00	S8	2012/94	2012/11/14			It shall be prescribed as a general requirement that, in case an automatic function is added, alphabets "A" or "AUTO" may be added to each relevant symbol mark.
14	Revision of UN/ECE regulation	RE3	02	A3		2013/3/22		Consolidated resolution on the construction of vehicles	"Egypt" shall be added to the approval mark.

PAGETOP

---

Table of amended regulations (May 2013).

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Adopted proposal regarding UN/ECE regulation	4	00	S16	2012/63	2012/11/14		Rear registration plate lamps	-The new regulation regarding LED light sources may be applied for replaceable LED light sources. -Error correction in a figure illustrating a case of marking.
2	Agreement regarding UN/ECE regulation	6	R5	C1	2012 /110+2012 /110 /Corr.1	2013/2/13	2012/11/14	Direction indicators	Error correction.
3	Agreement regarding UN/ECE regulation	13H	00	S14	2012/47	2013/2/14	2013/1/27	Braking (M1)	Clarification of the requirements for static braking force of the electronically controlled braking system (EBS).
4	Agreement regarding UN/ECE regulation	30	02	S17	2012/48	2013/2/14	2013/1/27	Pneumatic tyres (passenger vehicle)	-Definition of the new tyre categories introduced according to the revision of R117 shall be added. -Exemption of "temporary use spare tyres"from regulatory marking requirements. -With regard to the judgment procedure after the speed performance test description shall be modified.
5	Adopted proposal regarding UN/ECE regulation	31	02	S8	2012/69	2012/11/14		Halogen sealed beam headlamps	Clarification of conditions for types being identical with each other.
6	Agreement regarding UN/ECE regulation	44	04	S5	2012/44	2013/2/14	2013/1/27	Child restraint systems	-The caution label for Child Restraint System shall be revised for adjustment with the revision regarding label in R94. -Addition of a marking for the rearward facing plus tether ISOFIX anchorage. -Clarification of the location of the main load-bearing contact point. -Addition of an article prescribing production qualification tests. -The customer shall be advised not to use the rearward facing child restraint systems in seating positions where an active frontal airbag is installed. This information shall be clearly visible at the point of sale without removing the packaging.
7	Adopted proposal regarding UN/ECE regulation	46	04		2012/87	2012/11/14		Rear-view mirrors	Addition of a new mirror to large vehicles.
8	Agreement regarding UN/ECE regulation		03	S1	2012/22	2012/12/6	2012/11/18		Adjustment with the rules for exterior projections.
9	Agreement regarding UN/ECE regulation	48	04	S7/C1		2013/2/13	2012/11/14	Installation of lights	Error correction.
			04	S9	2012/10	2012/12/6	2012/11/18		Fitting requirements for maneuvering lamp shall be added.
			05	S2	2012/37	2012/12/6	2012/11/18		Requirements for DRL shall be mitigated.
			06		2012/11	2012/12/6	2012/11/18		Enhancement as well as clarification of function requirements regarding exterior courtesy lamps.
10	Adopted proposal regarding UN/ECE regulation		04 05 06	S10 S3 S1	2012/73	2012/11/14			-A part of sentences shall be deleted for transfer of LED module requirements to R112. -Addition of definition of ”Fixed (open) position of a movable component". -Correction of mounting requirements for retro-reflectors. -Deletion of a part of sentences for adjustment with R121 regarding tell-tale requirements for direction indicators. -Addition of definition of a goniometer. -Clarification that voltage control circuit may be located within the headlamp body.
					2012/73 /Corr.1	2012/11/14			Error correction.
			05 06	S3 S1	2012/74	2012/11/14			Revision of rules for the angle of reference axis regarding the geometric visibility of any back-up lamp.
11	Adopted proposal regarding UN/ECE regulation	50	00	S16	2012/75	2012/11/14		Lights (moped, motor cycle)	-The new regulation regarding LED light sources may be applied for replaceable LED light sources. -The inward visibility angle of a pair of front position lamps shall be mitigated to 20°
12	Adopted proposal regarding UN/ECE regulation	53	01	S14	2012/76	2012/11/14		Installation of lights (motor cycle)	-The inward visibility angle of a pair of front position lamps shall be mitigated to 20°. -The lamp approved according to R113 may be added as a part of the light source unit to passing beam on certain conditions.
13	Adopted proposal regarding UN/ECE regulation	61	00	S2	2012/89	2012/11/14		External projections (commercial vehicle)	The Annex defining the extent of the trichromatic coordinates shall be deleted.
14	Agreement regarding UN/ECE regulation	64	02	S2	2012/50	2013/2/14	2013/1/27	Temporary spare tyres	-Addition of temporary use spare tyres prescribed in R54 to the tyre unit. -For a type 4 temporary-use spare tyre unit the maximum speed warning symbol may be chosen from two alternatives.
15	Adopted proposal regarding UN/ECE regulation	77	00	S15	2012/77	2012/11/14		Parking lamps	The new regulation regarding LED light sources may be applied for replaceable LED light sources.
16	Agreement regarding UN/ECE regulation	77	00	S14	2010/100	2013/1/25	2011/6/23	Parking lamps	The Annex defining the extent of the trichromatic coordinates shall be deleted.
17	Adopted proposal regarding UN/ECE regulation	85	00	S6	2012/106	2012/11/14		Measurement of engine power	An article prescribing requirements for dual fuel engines shall be added.
18	Adopted proposal regarding UN/ECE regulation	87	00	S16	2012/78	2012/11/14		Daytime running lamps	-The limitation of trade mark within the lens surface shall be removed in adjustment with other regulations. -The new regulation regarding LED light sources may be applied for replaceable LED light sources.
19	Agreement regarding UN/ECE regulation	98	R3	C1	2012/61	2013/2/13	2012/11/14	Gas-discharge headlamps	Error correction.
20	Adopted proposal regarding UN/ECE regulation	100	01	S2	2012/101	2012/11/14		Electric power train	The definition of passenger compartment for the sake of electric safety assessment shall be corrected.
			02		2012/102	2012/11/14			Requirements for a Rechargeable Energy Storage System (REESS) shall be added.
					2012/102 /Corr.1	2012/11/14			Error correction.
21	Adopted proposal regarding UN/ECE regulation	112	01	S4	2012/82	2012/11/14		Headlamps (with an asymmetrical passing beam)	-Clarification of conditions for types being identical with each other. -Adjustment regarding the minimum size of approval mark. -In case a LED headlamp is applied for approval as a LED module, an ID code for LED module may not be marked. -Revision regarding the points for judging the stability of photometric performance of LED Modules. -Addition of requirements regarding plastic lens surface to the requirements for testing mechanical deterioration. -A voltage control gear may be located within the headlamp body within the limits as defined in R48. However, it shall remain removed during the test for approval. It shall clearly be shown that the electronic light source control gear, which is referred to in the requirements for using LED, is identical with the one used for operating the LED module.
22	Agreement regarding UN/ECE regulation	127	00		2010 /127+2011 /51	2013/1/7	2012/11/17	Pedestrian safety	A new UN regulation for pedestrian protection.
23	Agreement regarding UN/ECE regulation	128	00		2010 /44+2010 /44 /corr.1+2010 /110	2013/1/8	2012/11/17	Led	A new UN regulation regarding LED bulbs.

PAGETOP

---

Table of amended regulations (Apr. 2013).

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Agreement regarding UN/ECE regulation	14	07	S3	2011/116	2012/11/27	2012/7/26	Safety belt anchorages	Strength and equipment requirements shall be included according to additional application of side-facing seat for vehicles of M3 category.
2	Adopted proposal regarding UN/ECE regulation		07	S4	2012/97	2012/11/14			-To the description about the definition of anchorage angle explanation shall be added regarding its understanding in case vehicles are equipped with seat slide mechanism. -The term "adjusting device" shall be replaced with "adjusting system" regarding the safety belt anchorage location for front seat of M1 category and rear seat as well as special front and rear seats of categories other than M1. -To the definition of safety belt anchorage requirements for adjustable anchorage in M2 and M3 vehicles shall be added.
3					2012/42	2012/11/14			-According to adoption of the new CRS regulation i-size child restraint system shall be added to the child restraint systems, and requirements for its strength and installation shall also be prescribed.
4	Agreement regarding UN/ECE regulation	19	04	S3	2012/7	2012/12/6	2012/11/18	Front fog lamps	-Input voltage for Class F3 equipped with LED module(s) shall be changed, on the basis of which the statement in the communication form shall be changed. -Correction of allowable extent of a re-aim of the cut-off position for the Class F3. -Clear description of light sources to be used for the Class F3.
5	Agreement regarding UN/ECE regulation	23	00	S18	2012/8	2012/12/6	2012/11/18	Reversing and manoeuvring lamps	Maneuvering lamp shall be added.
6	Adopted proposal regarding UN/ECE regulation		00	S19	2012/68	2012/11/14			-The new regulation regarding LED light sources may be applied for replaceable LED light sources. -Adjustment regarding the minimum size of approval mark. Correction of alphabets "AR" in the marking example as they were incorrectly shaped.
7	Agreement regarding UN/ECE regulation	43	01	S1	2012/21	2012/12/6	2012/11/18	Uniform provisions concerning the approval of safety glazing materials	An amendment to replace "glazing" with "panes".
8	Agreement regarding UN/ECE regulation	58	02	S2	2012/23	2012/12/6	2012/11/18	Rear underrun protection	Clarification of tentative rules for the provisional period.
9	Agreement regarding UN/ECE regulation	70	01	S8	2012/13		2012/11/28	Rear marking plates for heavy and long vehicles	-Clarification of application extent. -Clarification regarding the nozzle to be used for the rainfall test.
10	Agreement regarding UN/ECE regulation	105	05	S1	2012/24	2012/12/6	2012/11/18	The carriage of dangerous goods with regard to their specific constructional features	The number of reference standard shall be changed.
11	Agreement regarding UN/ECE regulation	107	04	S2	2012/25	2012/12/6	2012/11/18	Category M2 or M3 vehicles with regard to their general construction	-When using a gauging device in the gangway, the device may come into contact with any monitor or display device mounted from the ceiling above the gangway on certain conditions. -Mitigation of requirements for the width of the seat.
12	Agreement regarding UN/ECE regulation	118	02		2011/111	2012/12/4	2012/7/26	The burning behaviour of materials used in the construction of certain categories of motor vehicles	The application extent of the burning test of materials used in the compartment shall be widened.
13	Agreement regarding UN/ECE regulation	119	01	S1	2012/18	2012/12/6	2012/11/18	Cornering lamps	-Error correction. -Clarification of detailed conditions about light source for measurement of colorimetric characteristics.
14	Adopted proposal regarding UN/ECE regulation		01	S2	2012/84	2012/11/14			-The new regulation regarding LED light sources may be applied for replaceable LED light sources. -Clarification of luminous intensity requirements.
15	Adopted proposal regarding UN/ECE regulation	123	01	S4	2012/85	2012/11/14		AFS	-Change of definition of the type of lamps. -Adjustment regarding the minimum size of approval mark. -Revision regarding points of judgment of the stability of photometric performance of LED Modules. -According to addition of the definition of goniometer to R48, its definition shall be deleted from R123.
16	Agreement regarding UN/ECE regulation		01	S3	2012/19	2012/12/6	2012/11/18		-Usage of non replaceable LED modules shall be admitted. -Requirements for mounting device of LED module shall be prescribed. -Correction of the light intensity criteria for passing beam headlamp.
17	Agreement regarding UN/ECE regulation	RE3	R02	A2		2012/12/24		Consolidated resolution on the construction of vehicles	-Definition of manufacturer shall be added.

PAGETOP

---

Table of amended regulations (Mar. 2013).

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Agreement regarding UN/ECE regulation	7	02	S20	2011/95	2012/11/22	2012/7/26	Front and rear position(side)lamps, stop lamps and end-outline marker lamps	Clarification of description with regard to the geometric visibility requirements in case of an interdependent lamp system.
2	Adopted proposal regarding UN/ECE regulation		02	S21	2012/65	2012/11/14			-The new regulation regarding LED light sources may be applied for replaceable LED light sources. -Correction of approval marking.
3	Agreement regarding UN/ECE regulation	12	04	S1	2011/115	2012/10/10	2012/7/26	Steering mechanism	-Correction of the definition of "exposed conductive part" for vehicles powered by an electric engine. -Clarification regarding the abbreviation for "Rechargeable energy storage system".
4	Adopted proposal regarding UN/ECE regulation		04	S2	2012/96	2012/11/14			The definition of passenger compartment for the sake of electric safety evaluation shall be corrected.
5	Adopted proposal regarding UN/ECE regulation	44	04	S6	2012/98	2012/11/14		Child restraint systems	Revision regarding the ISOFIX locking mechanism.
6	Adopted proposal regarding UN/ECE regulation	45	01	S7	2012/72	2012/11/14		Headlamp cleaners	Harmonization with regard to the minimum size of approval mark.
7	Agreement regarding UN/ECE regulation	46	03		2011/106	2012/10/3	2012/7/26	Rear-view mirrors	Correction of provisions regarding camera effect requirements for mirrors of Class V and Class VI.
8	Adopted proposal regarding UN/ECE regulation	91	00	S14	2012/79	2012/11/14		Side-marker lamps	The new regulation regarding LED light sources may be applied for replaceable LED light sources.
9	Adopted proposal regarding UN/ECE regulation	94	02	S3	2012/99	2012/11/14		Protection of the occupants in the event of a frontal collision	-Correction of the definition of "exposed conductive part" for vehicles powered by an electric engine. -Clarification regarding the abbreviation for "Rechargeable energy storage system".
10	Adopted proposal regarding UN/ECE regulation	95	03	S2	2012/100	2012/11/14		Protection of the occupants in the event of a lateral collision	-Correction of the definition of "exposed conductive part" for vehicles powered by an electric engine. -Clarification regarding the abbreviation for "Rechargeable energy storage system".
11	Adopted proposal regarding UN/ECE regulation	98	01	S4	2012/80	2012/11/14		Gas-discharge headlamps	-Revision of definition regarding types of headlamps. -Harmonization with regard to the minimum size of approval mark. -Revision regarding points of judgment of the stability of the photometric performance of LED Modules. -Correction of requirements for testing mechanical deterioration of plastic lens surface.
			R3	C1	2012/61	2012/11/14			Error correction.
12	Agreement regarding UN/ECE regulation		01	S3	2012/15	2012/12/6	2012/11/18		-UV radiation test shall not be applied to LED modules of low-UV type. -Correction of test voltage for measuring the intensity of light emitted.　 -Correction of the judgment criteria at test regarding the change of the vertical position of the "cut off" line under the heat influence.
13	Adopted proposal regarding UN/ECE regulation	116	00	S4	2012/93	2012/11/14		Protection against unauthorized use	Change of the series number of R10 which is referred to.

PAGETOP

---

Table of amended regulations (Feb. 2013).

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Adopted proposal regarding UN/ECE regulation	3	02	S13	2012/62	2012/11/14		Reflex reflectors	Adjustment of marking requirements among regulations.
2	Adopted proposal regarding UN/ECE regulation	6	01	S23	2012/64	2012/11/14		Direction indicators	Reproduction of a text for introduction into new provisions covering the use of LED light sources.
			R5	C1	2012/110	2012/11/14			Error correction.
					2012/110/Corri.1	2012/11/14			Error correction.
3	Adopted proposal regarding UN/ECE regulation	10	04	S2	2012/66	2012/11/14		Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility	Correction of tentative rules for the provisional period.
4	Adopted proposal regarding UN/ECE regulation	19	04	S4	2012/67	2012/11/14		Front fog lamps	-Change of definition of the type of lamps. -Judgment of conformity shall be corrected in consideration of practical usage.
5	Adopted proposal regarding UN/ECE regulation	26	03	S2	2012/86	2012/11/14		External projections	-The requirement to round edges by 2.5mm shall not be applied to front nor rear bumpers. -Addition of definition of "Revision" and "Extension".
6	Adopted proposal regarding UN/ECE regulation	38	00	S16	2012/71	2012/11/14		Rear fog lamps	Reproduction of a text for introduction into new provisions covering the use of LED light sources.
7	Adopted proposal regarding UN/ECE regulation	58	02	S3	2012/88	2012/11/14		Rear underrun protection	Clarification of the rule regarding the width of RUPD.
8	Agreement regarding UN/ECE regulation	59	01		2011/65	2012/11/14	2012/4/13	Replacement silencing system	Adjustment with R51 according to its revision.
9	Agreement regarding UN/ECE regulation	80	03		2011/119	2012/10/22	2012/7/26	Seat (large passenger vehicle)	Strength and equipment requirements shall be prescribed according to additional application of side-facing seat for vehicles of M3 category.

PAGETOP

---

Table of amended regulations (Jan. 2013).

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Agreement regarding UN/ECE regulation	6	01	S22	2011/128	2012/8/15	2012/7/26	Direction indicators	Amendment to delete those items which have unduly been remaining after the revision of intensity of the light emitted.
2	Agreement regarding UN/ECE regulation	10	R4	Erratum		2012/6/6	-	Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility	Error correction.
3			04	S1	2011/129	2012/8/15	2012/7/26		The ISO regulation to be referred to shall be changed.
4	Agreement regarding UN/ECE regulation	17	08	S1	2011/118	2012/8/15	2012/7/26	Seats	-Strength and equipment requirements shall be prescribed according to additional application of side-facing seat for vehicles of M3 category. -Clear description of requirement that the seat with integrated head restraint shall be padded at the head restraint area.
5	Agreement regarding UN/ECE regulation	19	03	S3	2011/130	2012/8/15	2012/7/26	Front fog lamps	Amendment regarding the photometric requirements for Class F3 front fog lamp.
6			04	S2	2011/96 +2011/150	2012/8/15	2012/7/26		-Addition of rules for gas-discharge light sources with integrated ballast regarding the gas-discharge light source allowed for Class F3 front fog lamp. -Correction of transitional rules.
7	Agreement regarding UN/ECE regulation	22	05	S2	2011/139	2012/8/15	2012/7/26	Motor cycles helmets	The symbol mark shall be changed..
8	Agreement regarding UN/ECE regulation	48	04	S8	201/98 +2011/151 +2011/131	2012/8/15	2012/7/26	Installation of lights	-Mitigation of requirement for the mounting height of rear fog lamp. -Correction of the definition of ballast. -Clarification of the application extent of requirements with regard to replacing a light source. -Compliance with the requirements of the 03 and subsequent series of amendments to Regulation No. 19. -Clarification of value requirements for objective luminous flux of a light source as well as an LED module. -Addition of requirements for the case DRL and position lamp are simultaneously activated -Correction of transitional rules.
9	Agreement regarding UN/ECE regulation	51	02	S8	2011/63	2012/5/23	2012/4/13	Noise	Addition of description on test methods for ASEP (The additional sound emission provisions)
10	Agreement regarding UN/ECE regulation	107	04	S1	2011/109	2012/8/15	2012/7/26	Category m2 or m3 vehicles with regard to their general construction	Reciprocal reference with R66 shall be abolished.
11	Agreement regarding UN/ECE regulation	112	01	S2	2011/102	2012/8/15	2012/7/26	Headlamps (with an asymmetrical passing beam)	Clarification of the definition of LED module.

PAGETOP

---

Table of amended regulations (Dec. 2012).

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Agreement regarding UN/ECE regulation	43	01		2011/35	2012/8/29	2011/10/28	Uniform provisions concerning the approval of safety glazing materials	Consideration of gtr6 in ECE43.
2	Agreement regarding UN/ECE regulation	123	01	S1/C1	-	2012/10/11	2011/10/28	AFS	Error correction.

PAGETOP

---

Table of amended regulations (Nov. 2012).

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Adopted proposal regarding UN/ECE regulation	11	03	S3	2012/41	2012/6/26		Door latches & hinges	-Clarification of the scope. -Clarification of the definition of back door.
2	Adopted proposal regarding UN/ECE regulation	13-H	00	S14	2012/47	2012/6/26		Braking (M1)	Clarification of the requirements for static braking force of the electronically controled braking system (EBS).
3	Adopted proposal regarding UN/ECE regulation	30	02	S17	2012/48	2012/6/26		Pneumatic tyres (passenger vehicle)	-Addition of the definition of the new tyre category introduced according to the revision of R117. -Exemption of "temporary use spare tyres"from regulatory marking requirement. -With regard to the judgment procedure after the speed performance test description shall be modified.
4	Agreement regarding UN/ECE regulation	37	03	S37	2011/10	2012/7/3	2011/10/28	Filament lamps	-In addition to the reference luminous flux at 13.2V a reference luminous flux 1650lm at 12.2V shall be included in the H9 data sheet. -9 bulbs shall be transferred from Group 2 to Group 3.
			R6	C1	2012/29 +2012/29/Corr.1		2012/3/14		Error correction.
5	Adopted proposal regarding UN/ECE regulation	44	04	S5	2012/44	2012/6/26		Child restraint systems	-The caution label for Child Restraint System shall be revised for adjustment with the revision regarding label in R94. -Addition of a marking for the rearward fasing plus tether ISOFIX anchorage. -Clarification of the location of the main load-bearing contact point. -Addition of an article prescribing production qualification tests. -The customer shall be advised not to use the rearward facing child restraint systems in seating positions where an active frontal airbag is installed. This information shall be clearly visible at the point of sale without removing the packaging.
6	Adopted proposal regarding UN/ECE regulation	54	00	S18	2012/49	2012/6/26		Pneumatic tyres(commercial vehicle)	-Addition of definition of the new tyre categories introduced according to the revision of R117. -Addition of marking requirements needed for the new tyre categories.
7	Agreement regarding UN/ECE regulation	58	R2	A1/C1		2012/10/3	2012/7/26	Rear underrun protection	Error correction.
8	Adopted proposal regarding UN/ECE regulation	64	02	S2	2012/50	2012/6/26		Temporary spare tyres	-Addition of a temporary use spare tyre unit prescribed in R54. -For a type 4 temporary-use spare tyre unit the maximum speed warning symbol may be chosen from two alternatives.
9	Agreement regarding UN/ECE regulation	94	01	S4/C1		2012/9/10	2012/7/26	Protection of the occupants in the event of a frontal collision	Error correction.
10	Adopted proposal regarding UN/ECE regulation	101	01	S1	2012/46	2012/6/26		Emission of carbon dioxide and fuel consumption (passenger car)	Adjustment with the US regulation.

PAGETOP

---

Table of amended regulations (Oct. 2012).

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Agreement regardingUN/ECE regulation	41	04		2011/62	2012/8/14	2012/4/13	Noise (motor cycle)	Addition of description on test methods for noise emissions during acceleration and those related to ASEP.
2	Agreement regardingUN/ECE regulation	48	05	S1	2011/132	2012/8/15	2012/7/26	Installation of lights	-Addition of requirements for the case DRL and position lamp are simultaneously activated. -Correction of transitional rules.
3	Agreement regardingUN/ECE regulation	49	05	S5	2011/124	2012/8/15	2012/7/26	Diesel emission	-Correction of words for adjusting EC regulation with EURO VI. -Reference standard shall be updated.
4	Agreement regardingUN/ECE regulation	58	02	S1	2011/107	2012/8/15	2012/7/26	Rear underrun protection	Increase of categories the regulation shall be applied for.
5	Agreement regardingUN/ECE regulation	94	01	S4	2011/120	2012/8/15	2012/7/26	Protection of the occupants in the event of a frontal collision	The caution label for airbag shall be changed.
			02	S2	2011/121	2012/8/15	2012/7/26		Revision of the definition of exposed conductive part regarding electric vehicles.
6	Agreement regardingUN/ECE regulation	95	03	S1	2011/122	2012/8/15	2012/7/26	Protection of the occupants in the event of a lateral collision	The definition of "exposed conductive part" for protection of occupants from direct contact with electrically energized parts of a system using high voltage current shall be amended.
7	Agreement regardingUN/ECE regulation	98	01	S2	2011/100	2012/8/15	2012/7/26	Gas-discharge headlamps	Revision of requirements for lamp for the light source with integrated ballast.
8	Agreement regardingUN/ECE regulation	99	00	S7	2011/101	2012/8/15	2012/7/26	Gas-discharge light sources	Introduction of a new gas-discharge light source of 25W.
9	Agreement regardingUN/ECE regulation	100	01	S1	2011/123	2012/8/15	2012/7/26	Electric power train	Revision of the definition of exposed conductive part regarding electric vehicles..
10	Agreement regardingUN/ECE regulation	104	00	S7	2011/133	2012/8/15	2012/7/26	Retro-reflective markings for heavy and long vehicles	Error correction with regard to the coefficient of retro-reflection for Class C.
11	Agreement regardingUN/ECE regulation	107	05		2011/110+corr.1	2012/8/15	2012/7/26	Category m2 or m3 vehicles with regard to their general construction	-Alarm system against fire inside the vehicle shall be introduced.
12	Agreement regardingUN/ECE regulation	113	00	S10	2011/103	2012/8/15	XX	Headlamps (with a symmetrical passing beam)	The provisions regarding lamp bodies shall be rearranged in consideration of introducing gas-discharge light sources with integrated ballast.
13	Agreement regardingUN/ECE regulation	121	00	S6	2011/112	2012/8/15	2012/7/26	The location and identification of hand controls,tell-tales and indicators	-Adjustment of terms regarding headlamp with R48. -Clarification of the definition of tell-tale.
14	Agreement regardingUN/ECE regulation	122	00	S3	2011/113	2012/8/15	2012/7/26	Heating system	Safety requirements for LPG combustion heaters and LPG heating systems.
15	Agreement regardingUN/ECE regulation	123	01	S2	2010/105	2012/8/15	2012/7/26	AFS	Revision of requirements for lamp for the light source with integrated ballast.

PAGETOP

---

Table of amended regulations (Sep. 2012).

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Agreement regarding UN/ECE regulation	13	11	S8	2011/58	2012/5/23	2012/4/13	Braking	Vehicles with 4 axles, with a maximum mass not exceeding 25 t and a maximum wheel diameter code not exceeding 19.5 in. shall be equipped with vehicle stability function.
2	Agreement regarding UN/ECE regulation	13H	00	S13	2011/59	2012/5/23	2012/4/13	Braking (M1)	-Clarification of the method to confirm the correct operational status of electronic systems at a periodic technical inspection. -"The ESC malfunction tell-tale in a flashing mode" may be used to indicate ESC intervention and/or the intervention of ESC- related systems
3	Agreement regarding UN/ECE regulation	14	07	S2	2011/54	2012/5/23	2012/4/13	Safety belt anchorages	-Requirements for marking of the ISOFIX top tether anchorages shall be clarified. -Addition of a rule to exempt vehicles with a high engine power from fitting obligation of ISOFIX anchorages.
4	Agreement regarding UN/ECE regulation	55	01	S3	2011/60	2012/5/23	2012/4/13	Mechanical coupling	The design of the drawbar including the coupling head for use on small trailers shall be such as to prevent the coupling head from digging into the ground in the event of separation from the main coupling.
5	Agreement regarding UN/ECE regulation	64	02	S1	2011/61	2012/5/23	2012/4/13	Temporary spare tyres	Requirements for brake performance test on vehicles equipped with temporary spare wheels and tyres shall be added.
6	Agreement regarding UN/ECE regulation	83	06	S2	2011/56	2012/5/23	2012/4/13	The emission of pollutants according to engine fuel requirements	Revision of requirements for the blower with air velocity corresponding to vehicle velocity for Type I test.
7	Agreement regarding UN/ECE regulation	94	02	S1	2011/55	2012/5/23	2012/4/13	Protection of the occupants in the event of a frontal collision	The caution label for airbag shall be changed.
			R1	Erratum		2012/6/8			Error correction.

PAGETOP

---

Table of amended regulations (Aug. 2012).

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Agreement regarding UN/ECE regulation	13H	R2	C2	2012/40	2012/6/4	2012/3/14	Braking (M1)	Error correction.
			R2	C1	2011/153	2012/5/23	2011/11/16		Error correction.
2	Agreement regarding UN/ECE regulation	49	R5	C1	2012/39	2012/6/4	2012/3/14	Diesel Emission	Error correction.
3	Agreement regarding UN/ECE regulation	50	R2	C1	2012/27+2012/27/Corr.1	2012/6/4	2012/3/14	Lights (Moped, Motor Cycle)	Error correction.
4	Agreement regarding UN/ECE regulation	51	R2			2011/11/29		Noise	An overall revision.
	Agreement regarding UN/ECE regulation	51	R2	C1	2012/38	2012/6/4	2012/3/14		Error correction.
5	Adopted proposal regarding UN/ECE regulation	92	01		2012/5	2012/3/14		Replacement Silencing System (Motor Cycle)	Adjustment with the content of R41.
6	Agreement regarding UN/ECE regulation	107	R3	C1	2012/28	2012/6/4	2012/3/14	Category M2 Or M3 Vehicles With Regard To Their General Construction	Error correction.
7	Adopted proposal regarding UN/ECE regulation	117	02	S1	2012/2	2012/3/14		The Approval Of Tyres With Regard To Rolling Sound Emissions	-The wet grip testing method C1 tyres shall be corrected. -The snow grip testing method of C3 tyres shall be corrected.
	Adopted proposal regarding UN/ECE regulation				2012/6	2012/3/14			Regarding the deceleration method, an alternative expression shall be added.

PAGETOP

---

Table of amended regulations (Jul. 2012).

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Adopted proposal regarding UN/ECE regulation	13	11	S9	2011/94	2012/3/14		Braking	Annex 19 Part2: As an alternative to carrying-out dynamic manoeuvres on vehicles, the results from computer simulations may be submitted when applying EVSC for approval.Annex21　Clarification of vehicle categories to be targeted at. Clarification of conditions for simulation.
					2011/94/Amend1	2012/3/14			Annex 19 Part2: As an alternative to carrying-out dynamic manoeuvres on vehicles, the results from computer simulations may be submitted when applying EVSC for approval.Annex21　Clarification of vehicle categories to be targeted at. Clarification of conditions for simulation.
					2012/3	2012/3/14			Clarification of requirements for the minimum braking performance.
2	Adopted proposal regarding UN/ECE regulation	19	04	S3	2012/7	2012/3/14		Front fog lamps	-Input voltage for Class F3 equipped with LED module(s) shall be changed, which shall lead to change of the statement in the communication form. -Correction of allowable extent of a re-aim of the cut-off position for the Class F3. -Clear description of light sources to be used for the Class F3.
3	Adopted proposal regarding UN/ECE regulation	23	00	S18	2012/8	2012/3/14		Reversing lamps	Manoeuvring lamp shall be added.
4	Adopted proposal regarding UN/ECE regulation	34	02	S5	2012/20	2012/3/14		Prevention of fire risks	No charge dissipation system is required for fuel tanks designed for containing a fuel with a flash point of No charge dissipation system is required for fuel tanks designed for containing a fuel with a flash point less than, or equal to 55 ℃.
5	Adopted proposal regarding UN/ECE regulation	37	03	S39	2012/9	2012/3/14		Filament lamps	A new light source category H17 shall be introduced.
			R6	C1	2012/29	2012/3/14			Correction of physical errors.
					2012/29/Corr.1	2012/3/14			Error correction.
6	Adopted proposal regarding UN/ECE regulation	43	01	S1	2012/21	2012/3/14		Uniform provisions concerning the approval of safety glazing materials	An amendment to replace "glazing" with "panes".
7	Adopted proposal regarding UN/ECE regulation	46	03	S1	2012/22	2012/3/14		Rear-view mirrors	Adjustment with the regulation on projection from external surface.
8	Adopted proposal regarding UN/ECE regulation	48	04	S9	2012/10	2012/3/14		Installation of lights	Addition of requirements regarding installation of manoeuvring lamps.
			05	S2	2012/37	2012/3/14			Requirements for DRL shall be mitigated.
			06		2012/11	2012/3/14			Enhancement of function requirements as well as clarification regarding exterior courtesy lamps.
9	Adopted proposal regarding UN/ECE regulation	58	02	S2	2012/23	2012/3/14		Rear underrun protection	Clarification of provisional regulations for transitional period.
10	Adopted proposal regarding UN/ECE regulation	70	01	S8	2012/13	2012/3/14		Rear marking plates for heavy and long vehicles	-Clarification of application extent. -Clarification of requirements for the nozzle to be used for the rainfall test.
11	Adopted proposal regarding UN/ECE regulation	90	02	S1	2012/4	2012/3/14		Replacement brake lining assemblies	Clarification of test methods, rules, etc.
12	Agreement regarding UN/ECE regulation	90	02		2011/6	2012/2/17	2011/10/28		Clarification of test methods, rules, etc.
13	Adopted proposal regarding UN/ECE regulation	98	01	S3	2012/15	2012/3/14		Gas-discharge headlamps	-UV resistance test shall not be applied to the low-UV-type LED modules. -Correction of the test voltage for photometric measurement. -Correction of the judgment criteria at test regarding the change of the vertical position of the "cut off" line under the heat influence.
14	Agreement regarding UN/ECE regulation	98	01	S1	2011/14	2012/2/23	2011/10/28		-Using more than one LED module shall be allowed for the driving beam. -For adjustment with R123 the maximum luminous intensity of the beam illuminating the surface of the side of road opposite to that of the relevant vehicle shall be 50 cd.
15	Adopted proposal regarding UN/ECE regulation	105	05	S1	2012/24	2012/3/14		The carriage of dangerous goods with regard to their specific constructional features	The number of reference standard shall be changed.
16	Adopted proposal regarding UN/ECE regulation	107	04	S2	2012/25	2012/3/14		Category m2 or m3 vehicles with regard to their general construction	-When using a gauging device in the gangway of certain vehicle categories, the device may come into contact with any monitor or display device mounted from the ceiling above the gangway on certain conditions. -Mitigation of requirements for the width of the seat.
			R3	C1	2012/28	2012/3/14			Error correction.
17	Adopted proposal regarding UN/ECE regulation	112	01	S3	2012/16	2012/3/14		Headlamps (with an asymmetrical passing beam)	-Mitigation of requirements for the aiming test. -Error correction in the Table UV. -Adjustment of COP requirements with R98. -Addition of a definition of light source module. -Error correction.
18	Adopted proposal regarding UN/ECE regulation	113	01	S1	2012/17	2012/3/14		Headlamps (with a symmetrical passing beam)	-LED light source shall be admitted to Class A and Class B. -Addition of a definition of light source module.
19	Adopted proposal regarding UN/ECE regulation	119	01	S1	2012/18	2012/3/14		Cornering lamps	-Error correction. -Clarification of detailed conditions about light source measurement of colorimetric characteristics.
20	Agreement regarding UN/ECE regulation	119	01		2010/102	2012/3/27	2011/6/23	Cornering lamps	-Test voltage shall clearly be prescribed for each bulb category. -Correction regarding the intensity of the light emitted. -Error correction.
			01/C1		2011/32
21	Adopted proposal regarding UN/ECE regulation	121	00	S7	2012/26	2012/3/14		The location and identification of hand controls,tell-tales and indicators	Change of colour of the tell-tale for headlamp as well as addition of new symbol mark(s).
22	Adopted proposal regarding UN/ECE regulation	123	01	S3	2012/19	2012/3/14		AFS	-Usage of non replaceable LED modules shall be admitted. -Correction of requirements for mounting device of LED module. -Correction of the light intensity criteria for passing beam headlamp.

PAGETOP

---

Table of amended regulations (Jun. 2012).

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
5	Agreement regarding UN/ECE regulation	10	04		2011/8	2012/3/6	2011/10/28	Uniform Provisions Concerning the Approval of Vehicles With Regard To Electromagnetic Compatibility	Control of current, voltage, etc. for assuring electromagnetic compatibility (EMC) of charger of electric vehicles
			04	C1	2011/83	2012/3/6	2011/10/28		Error correction.

PAGETOP

---

Table of amended regulations (May 2012).

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Agreement regarding UN/ECE regulation	12	04	C1	2011/66	2012/1/31	2011/6/23	Steering mechanism	Error correction.
2	Agreement regarding UN/ECE regulation	14	R4	C1	2011/67	2012/1/31	2011/6/22	Safety belt anchorages	Error correction.
3	Agreement regarding UN/ECE regulation	16	R6	C2	2011/68	2012/1/31	2011/6/22	Safety belts	Error correction.
4	Agreement regarding UN/ECE regulation	49	05	S2	2009/114+2009/115	2011/5/4	2010/8/19	Diesel emission	Consideration of the revision of WHDC, gtr No. 4.
				S2/C1	2010/51		2010/8/19		Error correction.
				S3	2010/54/Rev.1		2010/12/9		-Addition of provisions for ON-BOARD DIAGNOSTIC SYSTEMS (OBD) regarding engines fuelled with natural gas (NG) or liquefied petroleum gas (LPG). -Harmonization with ECE R83 regarding vehicles named in application extent. Notification that R49 shall be applied to vehicles with a reference mass exceeding 2610kg.
	Agreement regarding UN/ECE regulation		05	S4	2010/128	2011/7/7	2011/6/23		Addition of a particle number test method including measurement at periodic regeneration.
	Adopted proposal regarding UN/ECE regulation		05	S5	2011/124	2011/11/16			-Correction of words for adjusting EC regulation with EURO VI. -Reference standard shall be updated.
5	Adopted proposal regarding UN/ECE regulation	67	01	S10	2011/108	2011/11/16		Specific equipment of vehicle using LPG	-Correction of technical requirements according to addition of class 0 to Definition. -Addition of definition.
	Agreement regarding UN/ECE regulation		01	S9	2009/101	2010/10/4	2010/8/19		M1 vehicles having either a maximum total mass > 3500 kg or a body type SA, may be fitted with a heating system to heat the passenger compartment which is connected to the LPG-system.
6	Agreement regarding UN/ECE regulation	75	R2	C1	2011/74	2012/1/31	2011/6/22	Pneumatic tyres (moped, motor cycle)	Error correction.
7	Agreement regarding UN/ECE regulation	94	02	Ｃ1	2011/69	2012/1/31	2011/6/23	Protection of the occupants in the event of a frontal collision	Error correction.
8	Agreement regarding UN/ECE regulation	115	00	S4/C1	2011/71	2012/1/31	2011/6/22	LPG/CNG retrofit system	Error correction.

PAGETOP

---

Table of amended regulations (Apr. 2012).

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Agreement regarding UN/ECE regulation	13	11	S6	2011/3	2011/12/12	2011/10/28	Braking	Addition of a requirement to fill identification code of original spare parts prescribed by the rule for spare brake drums and discs in R90 in the approval certificate.
			11	S7	2011/4	2011/12/12	2011/10/28		-Revision of conditions for activation of stop lamp regarding vehicles equipped with electric regenerative braking system and/or endurance braking system. - With regard to the alternative procedure for type approval of trailers application of the alternative procedure to verify ABS performance shall be extended to trailers with 4 or more axles.
2	Agreement regarding UN/ECE regulation	19	04	S1	2011/9	2011/12/12	2011/10/28	Front fog lamps	It shall be prohibited to use a light source of which luminous intensity is equal to, or more than 2000 lumen for Class B front fog lamp.
	Adopted proposal regarding UN/ECE regulation		04	S2	2011/96	2011/11/16			-Addition of rules for gas-discharge light sources with integrated ballast regarding the gas-discharge light source allowed for Class F3 front fog lamp. -Revision of transitional rules.
					2011/150	2011/11/16			-Addition of rules for gas-discharge light sources with integrated ballast regarding the gas-discharge light source allowed for Class F3 front fog lamp. -Revision of transitional rules.
					2011/130	2011/11/16			-Amendment regarding the photometric requirements for Class F3 front fog lamp.
3	Agreement regarding UN/ECE regulation	29	03		2010/60	2012/1/2	2011/1/30	Cab of commercial vehicles	An overall revision of rules aiming at increasing the cab strength. -Revision of the contents of impact test to A-pillars of the cab. -Change of the load for impact test to the roof of the cab. -Revision of requirements for attachment of the cab to the chassis after the test, etc.
4	Agreement regarding UN/ECE regulation	43	00	S14	2011/34	2011/12/12	2011/10/28	Uniform provisions concerning the approval of safety glazing materials	For vehicles with a driver seat in the central driving position the test area A used for M1 and N1 vehicles shall additionally be applied.
5	Adopted proposal regarding UN/ECE regulation	48	04	S8	2011/98	2011/11/16		Installation of lights	-Mitigation of requirement for the mounting height of rear fog lamp. -Correction of the definition of ballast. -Clarification of the application extent of requirements with regard to replacing a light source.
					2011/151	2011/11/16			Adjustment with 03 and subsequent series of amendments to Regulation No. 19.
					2011/131	2011/11/16			Clarification of value requirements for objective luminous flux of a light source as well as an LED module.
					2011/132	2011/11/16			-Addition of requirements for the case DRL and position lamp are simultaneously activated. -Correction of transitional rules.
	Agreement regarding UN/ECE regulation		04	S7	2011/11	2011/12/12	2011/10/28		-Correction of requirements for the vertical inclination of cut-off of F3 front fog lamp not exceeding 2000 lumen. -For a bulb for which more than one test voltages are prescribed the objective luminous flux for low beam shall be applied. -Automatic switching between high beam and low beam shall be allowed. -Adaptive main beam shall be admitted.
6	Agreement regarding UN/ECE regulation	50	00	S15	2011/12	2011/12/12	2011/10/28	Lights (moped, motor cycle)	Front position lamps may emit white or amber light.
7	Agreement regarding UN/ECE regulation	53	01	S13	2011/13	2011/12/12	2011/10/28	Installation of lights (motor cycle)	-Front position lamps may emit white or amber light. -Front position lamp may reciprocally be incorporated with front direction indicator lamp. -Optional use of tell tale for stop lamp shall be admitted.
8	Agreement regarding UN/ECE regulation	66	02		2009/100	2010/10/4	2010/8/19	Strength of super structure(large passenger vehicle)	-An overall revision of sentences. -Addition of single-deck rigid or articulated vehicles having more than 16 passengers to the scope. -Amendment of the definition. -Addition of transitional rules. -Amendment of Annexes 1, 3, 5, 6 and 7.
9	Agreement regarding UN/ECE regulation	95	03		2010/123	2011/11/16	2011/6/23	Protection of the occupants in the event of a lateral collision	Test procedures for protection of occupants of vehicles operating on electrical power from high voltage and electrolyte spillage in a collision, together with relevant amendments, shall be added.
			03	C1	2011/70
	Adopted proposal regarding UN/ECE regulation		03	S1	2011/122	2011/11/16			The definition of "exposed conductive part" for protection of occupants from direct contact with electrically energized parts shall be amended.
10	Agreement regarding UN/ECE regulation	107	02	S7	2010/114	2011/10/18	2011/6/23	Category m2 or m3 vehicles with regard to their general construction	Revision regarding the size of passenger area as an influence factor for door layout.
	Agreement regarding UN/ECE regulation		R3	erratum 1		2011/12/21			Error correction.
	Adopted proposal regarding UN/ECE regulation		04	S1	2011/109	2011/11/16			Reciprocal reference with R66 shall be abolished.
			05		2011/110	2011/11/16			-Alarm system against fire inside the vehicle shall be introduced.
					2011/110/Corr.1	2011/11/16
			03	S1/C1	2011/136	2011/11/16			Error correction.
			R2	C4	2011/137	2011/11/16			Error correction.
					2011/137/Corr.1	2011/11/16			Error correction.
	Agreement regarding UN/ECE regulation		03	S2	2011/36	2011/12/12	2011/10/28		-Vehicles of Classes I and A shall not have escape hatches fitted in the roof, if technical components are installed there which present possible dangers to passengers using the escape hatches. -The gangway mannequin shall be changed.
	Agreement regarding UN/ECE regulation		04		2011/37	2011/12/12	2011/10/28		For vehicles of Classes I and A the vertical distance between the floor of the seating area at priority seating positions and the adjacent gangway shall not exceed 250 mm.
11	Agreement regarding UN/ECE regulation	110	00	S9	2009/105	2010/10/4	2010/8/19	Vehicles using cng	A revision to refer to ISO regarding the shape of fuel inlet of vehicles powered by CNG.
12	Adopted proposal regarding UN/ECE regulation	113	00	S10	2011/103	2011/11/16		Headlamps (with a symmetrical passing beam)	The provisions regarding lamp bodies shall be rearranged in consideration of introducing gas-discharge light sources with integrated ballast.
			01		2011/104	2011/11/16			A revision to shift to reference luminous flux at 13.2 V.
13	Adopted proposal regarding UN/ECE regulation	118	02		2011/111	2011/11/16		The burning behaviour of materials used in the construction of certain categories of motor vehicles	The application extent of the burning test of materials used in the compartment shall be widened.
14	Agreement regarding UN/ECE regulation	RE3	R02	A01		2012/1/25		Consolidated resolution on the construction of vehicles	Recommendation on fuel quality parameters shall be added as annex.

PAGETOP

---

Table of amended regulations (Mar. 2012).

* S: Amendment number, C: Error correction number.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Adopted proposal regarding UN/ECE regulation.	6	01	S22	2011/128	2011/11/16		Direction indicators	-Amendment to delete those items which have unduly been remaining after the revision of intensity of the light emitted.
2	Adopted proposal regarding UN/ECE regulation.	7	02	S20	2011/95	2011/11/16		Front and rear position(side)lamps, stop lamps and end-outline marker lamps	Clarification of description with regard to the geometric visibility requirement in the case of an interdependent lamp system.
3	Agreement regarding UN/ECE regulation		02	S19	2011/7	2011/12/12	2011/10/28		Clarification that the rule to comply with the requirement of minimum intensity if one of lamps fails shall be applied only for lamps to be type approved as "D" lamps.
4	Adopted proposal regarding UN/ECE regulation.	10	04	S1	2011/129	2011/11/16		Radio interference suppression	The ISO regulation to be referred to shall be changed.
5	Adopted proposal regarding UN/ECE regulation.	12	04	S1	2011/115	2011/11/16		Steering mechanism	Revision of the definition of exposed conductive part regarding electric vehicles.
6	Agreement regarding UN/ECE regulation	13H	00	S11	2010/65	2011/10/4	2011/1/30	Braking (m1)	- Revision of illuminating requirements of stop lamp when electric regenerative brake is activated. - The maximum velocity to be applied for testing vehicles equipped with electric regenerative brake regarding confirmation of behaviour on low-adhesion road surfaces shall be changed. - The maximum velocity to be applied to testing vehicles equipped with electric regenerative brake on low-adhesion road surfaces shall be changed. - The maximum velocity to be applied tor testing vehicles equipped with regenerative brake on low μ road surface shall be changed.
			00	S9/C1	2011/72		2011/6/22		-Error correction.
	Adopted proposal regarding UN/ECE regulation.		R2	C1	2011/153	2011/11/16			Error correction.
	Agreement regarding UN/ECE regulation		00	S12	2011/5	2011/12/12	2011/10/28		Addition of requirement to note identification code in the approval certificate of original spare parts prescribed by the rule for spare brake drums and discs in R90.
7	Adopted proposal regarding UN/ECE regulation.	14	07	S3	2011/116	2011/11/16		Safety belt anchorages	Strength and equipment requirements shall be prescribed according to additional application of side-facing seat for vehicles of M3 category.
8	Agreement regarding UN/ECE regulation		07	S1	2009/109	2010/10/4	2010/8/19		A revision to make adjustment within R14 regarding requirements for equipment of ISOFIX-anchorage.
9	Adopted proposal regarding UN/ECE regulation.	16	06	S2	2011/117	2011/11/16		Safety belts	Strength and equipment requirements shall be prescribed according to additional application of side-facing seat for vehicles of M3 category.
10	Adopted proposal regarding UN/ECE regulation.	17	08	S1	2011/118	2011/11/16		Seats	-Strength and equipment requirements shall be prescribed according to additional application of side-facing seat for vehicles of M3 category. -Clear description of requirement that the seat with integrated head restraint shall be padded at the head restraint area.
11	Adopted proposal regarding UN/ECE regulation.	22	05	S2	2011/139	2011/11/16		Motor cycles helmets	A revision regarding the symbol mark.
12	Adopted proposal regarding UN/ECE regulation.	34	02	S4	2011/134	2011/11/16		Prevention of fire risks	Information list of approval of fuel tanks shall be revised.
13					2011/135	2011/11/16			Recovery of missing contents, which has no influence on technical requirements.
14	Agreement regarding UN/ECE regulation	37	03	S35	2010/17	2011/10/3	2010/12/9	Filament lamps	Adoption of new lamp.
			03	S35/C1	2010/104		2010/12/9		Error correction.
			03	S35/C2	2011/35		2011/3/9		Error correction.
			03	S36	2010/96		2011/6/23		Introduction of H16B-bulb.
			03	S36/C1	2011/24		2011/6/23		Error correction.
	Adopted proposal regarding UN/ECE regulation.		03	S38	2011/97	2011/11/16			Old light source categories shall be phased out.
15	Adopted proposal regarding UN/ECE regulation.	46	03		2011/106	2011/11/16		Rear-view mirrors	Revision of mirror requirements regarding mirrors of V and VI classes.
16	Agreement regarding UN/ECE regulation		02	S5	2010/111	2011/12/12	2011/10/28		An amendment to admit application on revision in the application procedure for approval.
17	Adopted proposal regarding UN/ECE regulation.	58	02	S1	2011/107	2011/11/16		Rear underrun protection	Increase of categories the regulation shall be applied for.
18	Adopted proposal regarding UN/ECE regulation.	80	03		2011/119	2011/11/16		Seat(large passenger vehicle)	Strength and equipment requirements shall be prescribed according to additional application of side-facing seat for vehicles of M3 category.
19	Adopted proposal regarding UN/ECE regulation.	94	01	S4	2011/120	2011/11/16		Protection of the occupants in the event of a frontal collision	The caution label for airbag shall be changed.
20			02	S2	2011/121	2011/11/16			Revision of the definition of exposed conductive part regarding electric vehicles..
21	Adopted proposal regarding UN/ECE regulation.	98	01	S2	2011/100	2011/11/16		Gas-discharge headlamps	Revision of requirements for lamp for the light source with integrated ballast.
22	Adopted proposal regarding UN/ECE regulation.	99	00	S7	2011/101	2011/11/16		Gas-discharge light sources	Introduction of a new gas-discharge light source of 25W.
23	Adopted proposal regarding UN/ECE regulation.	100	01	S1	2011/123	2011/11/16		Electric power train	Revision of the definition of exposed conductive part regarding electric vehicles.
24	Adopted proposal regarding UN/ECE regulation.	104	00	S7	2011/133	2011/11/16		Retro-reflective markingsfor heavy and long vehicles	Error correction with regard to the coefficient of retro-reflection for Class C,
25	Agreement regarding UN/ECE regulation	112	01	S2	2011/102	2011/11/16		Headlamps (with an asymmetrical passing beam)	Clarification of the definition of LED module.
26	Agreement regarding UN/ECE regulation		01	S1	2011/15	2011/12/12	2011/10/28		-Revision of transitional rules. - Error correction.
27	Adopted proposal regarding UN/ECE regulation.	121	00	S6	2011/112	2011/11/16		The location and identification of hand controls,tell-tales and indicators	-Adjustment of terms regarding headlamp with R48. -Clarification of the definition of tell-tale.
28	Agreement regarding UN/ECE regulation		00	S5	2011/38	2011/12/12	2011/10/28		Addition of a symbol for electronic stability control.
29	Adopted proposal regarding UN/ECE regulation.	122	00	S3	2011/113	2011/11/16		Heating system	Safety requirements for LPG combustion heaters and LPG heating systems.
30	Adopted proposal regarding UN/ECE regulation.	123	01	S2	2010/105	2011/11/16		Afs	Revision of requirements for lamp for the light source with integrated ballast.
31	Agreement regarding UN/ECE regulation		01	S1	2011/16	2011/12/12	2011/10/28		-Photometric requirements for new adaptive driving beams shall be prescribed. -Light sources applicable for adaptive front-lighting systems shall be prescribed. -Lighting cycles for thermal resistance test of adaptive front-lighting systems shall be changed. -The minimum intensity requirements above the H-line shall be changed.
32	Adopted proposal regarding UN/ECE regulation.	125	00	S4	2011/138	2011/11/16		The forward field of vision	Prescription not to consider "radio aerial" conductors, nor "defroster/demisters" to be obstructions to the field of vision.

PAGETOP

---

Table of amended regulations (Feb. 2012).

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Agreement regarding UN/ECE regulation	13	11	S4	2010/3 +corr.1 +corr.2	2011/8/4	2010/12/9	Braking	-Consideration of the new ISO regulation in the electrical connector standard for trailer and tractor. -Revision of the definition of electric control line. -Consideration of the new ISO standard for marking of brake fluid. -Clarification of the extent in which the emergency braking signal shall be activated. -Clarification of detailed conditions in case a manufacturer voluntarily provides vehicles of N1 category with a vehicle stability function. -Clarification of the definition of conditions under which a vehicle stability function may not be activated. -Warning requirements for the case a vehicle stability function is not activated.
				S4 /C1	2010/148		2010/12/9		Error correction.
				S5	2010/64		2011/1/30		-Clarification of function and performance requirements for a case the electrical control transmission of ABS should fail. -Addition of explanation on sp;ecial purpose N2 vehicles excluded from equipment requirement with vehicle stability function and provided with a low-frame chassis, more than two axles and hydrauric braking system. -Addition of requirements of mechanical coupling for trailers of O1 category. -Vehicles may undergo the Type-I test or alternatively a Type-III test in the case of an O3 trailer. -Addition of requirements regarding the spring brake for trailers. -Revision of mounting location and the calculation method regarding the inertia type parking brake for trailers.
2	Agreement regarding UN/ECE regulation	80	02		2010/61	2011/10/25	2011/1/30	Seat (Large passenger vehicle)	Installation of side-facing seats shall be prohibited in vehicles of categories M2 (of Class III or B) and M3 (of Class III or B).
3	Agreement regarding UN/ECE regulation	105	05		2010/113	2011/9/28	2011/6/23	The carriage of dangerous goods with regard to their specific constructional features	Adjustment with the European regulations with regard to international transport of dangerous goods.

PAGETOP

---

Table of amended regulations (Jan. 2012).

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Agreement regarding UN regulation	6	01	S21	2010/93	2011/10/7	2011/6/23	Direction indicators	The Annex prescribing the limits of trichromatic coordinates shall be deleted.
2	Agreement regarding UN regulation	117	02		2010/63	2011/9/15	2011/1/30	The approval of tyres with regard to rolling sound emissions	Addition of requirements for rolling resistance of tyres and relevant test method.
				C1	2010/146	2011/9/15	2011/1/30		Error correction.
				C2	2011/75	2011/9/15	2011/6/22		Error correction.
				C3	2011/76	2011/9/15	2011/6/22		Error correction.
3	Agreement regarding UN regulation	121	00	S4	2010/116	2011/10/4	2011/6/23	The location and identification of hand controls,tell-tales and indicators	The year of issue of the ISO regulations to be referred to regarding symbols identifying controls, tell-tales and indicators shall be renewed.

PAGETOP

---

Table of amended regulations (Dec. 2011).

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Adopted proposal regarding UN regulation	41	04		2011/62	2011/6/22		Noise (motor cycle)	Addition of test methods for noise emissions during acceleration and those related to ASEP.
2	Agreement regarding UN regulation	75	00	S13	2009/7	2010/9/7	2009/10/24	Pneumatic tyres (moped, motor cycle)	Addition of new tyre sizes.
3	Adopted proposal regarding UN regulation		R2	C1	2011/74	2011/6/22			Error correction

PAGETOP

---

Table of amended regulations (Nov. 2011).

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Adopted proposal regarding UN regulation.	59	01		2011/65	2011/6/22		Replacement silencing system	Adjustment with R51 according to the revision of R51.
2	Agreement regarding UN regulation	73	01		2010/38	2011/9/1	2010/12/9	Lateral protection (goods vehicle)	The total revision of provisions regarding lateral protection.
3	Agreement regarding UN regulation	103	00	S3	2010/131	2011/8/30	2011/6/23	Replacement catalytic converters	-Addition of rules regarding periodically regenerating pollution control system. -Renewal of the definition of replacement pollution control devices.

PAGETOP

---

Table of amended regulations (Oct. 2011).

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Agreement regarding UN regulation	RE3	R02			2011/6/30	-	Consolidated resolution on the construction of vehicles	Issue of a re-edition with regard to the definition of 3-D H machine, category, etc. to be used for ECE.
2	Adopted proposal regarding UN regulation	13	11	S8	2011/58	2011/6/22		Braking	Vehicles with 4 axles, with a maximum mass not exceeding 25 t and a maximum wheel diameter code not exceeding 19.5 in. shall be equipped with vehicle stability function.
3	Adopted proposal regarding UN regulation	51	2	S8	2011/63	2011/6/22		Noise	Test method regarding the additional sound emission provisions shall be added.
4	Adopted proposal regarding UN regulation	55	1	S3	2011/60	2011/6/22		Mechanical coupling	The design of the drawbar including the coupling head for use on small trailers shall be such as to prevent the coupling head from digging into the ground in the event of separation from the main coupling.
5	Adopted proposal regarding UN regulation	115	0	S4/C1	2011/71	2011/6/22		LPG/CNG retrofit system	Error correction.
6	Agreement regarding UN regulation	123	0	S4	2009/98	2011/6/10	2010/8/19	AFS	A revision to prescribe lighting voltage in bundle for each light source category.
			1		2010/35		2010/12/9		Rated voltage for lighting lamp at the type approval test shall be changed from 12V to 13.2V.
			1	C1	2010/109		2010/12/9		Error correction.
			1	C2	2011/33		2011/3/9		Error correction.

PAGETOP

---

Table of amended regulations (Sep. 2011).

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document*		Working Documents # (ECE/TRANS/WP.29/)	Issuing date	Entry into force	Title	Description ** (To see the original document, click the text.)
	Name	#
1	Agreement regarding UN regulation	3	02	S12	2010/92	2011/7/7	2011/6/23	Reflex reflectors	A definition of the measurement procedure of colorimetric characteristics shall be added.
2	Agreement regarding UN regulation	7	02	S18	2010/94	2011/7/7	2011/6/23	Front and rear position(side)lamps, stop lamps and end-outline marker lamps	The Annex defining the extent of the trichromatic coordinates shall be deleted.
3	Adopted proposal regarding UN regulation	10	04	C1	2011/83	2011/6/22		Radio interference suppression	Error correction.
4	Agreement regarding UN regulation	12	04		2010/119	2011/7/7	2011/6/23	Steering mechanism	Test Procedures for the protection of the occupants of vehicles operating on electrical power from high voltage and electrolyte spillage in a collision, together with relevant amendments, shall be added.
	Adopted proposal regarding UN regulation		04	C1	2011/66	2011/6/22			Error correction.
5	Adopted proposal regarding UN regulation	13-H	00	S13	2011/59	2011/6/22		Braking (M1)	-Clarification of the method to confirm the correct operational status of electronic systems at a periodic technical inspection. -"The ESC malfunction tell-tale in a flashing mode may be used" to indicate ESC intervention and/or the intervention of ESC- related systems
			00	S9/C1	2011/72	2011/6/22			Error correction.
6	Adopted proposal regarding UN regulation	14	R4	C1	2011/67	2011/6/22		Safety belt anchorages	Error correction.
			07	S2	2011/54	2011/6/22			-The requirements for marking of the ISOFIX top tether anchorages shall be clarified. -Addition of a rule to exempt vehicles with a high engine power from fitting obligation of ISOFIX anchorages.
7	Agreement regarding UN regulation	16	06	S1	2010/121	2011/7/7	2011/6/23	Safety belts	-Correction of transitional rules. -A revision to admit a red warning lamp which is made off when seat belts are used.
	Adopted proposal regarding UN regulation		R6	C2	2011/68	2011/6/22			Error correction.
8	Agreement regarding UN regulation	23	00	S17	2010/95	2011/7/7	2011/6/23	Reversing lamps	A revision with regard to measurement procedure of colorimetric characteristics.
9	Agreement regarding UN regulation	50	00	S14	2010/97	2011/7/7	2011/6/23	Lights (moped, motor cycle)	-The Annex defining the extent of the trichromatic coordinates shall be deleted. -It shall be permitted to use a light source with single filament for more than one function by means of changing luminous intensity through control gear.
10	Agreement regarding UN regulation	53	01	S12	2010/98	2011/7/7	2011/6/23	Consideration of Euro5/Euro6 for EC reguration.	-Requirements for reciprocal incorporation prescribed in R48 shall be added. -Prescription of the electric connection for DRL shall be revised. -The rule prohibiting "head lamp and other function in one" shall be deleted. -The rule prohibiting "direction indicator lamp and other function in one" as well as "reciprocal incorporation regarding direction indicator lamp" shall be deleted.
11	Adopted proposal regarding UN regulation	64	02	S1	2011/61	2011/6/22		Temporary spare tyres	Requirements for brake performance test on vehicles equipped with temporary spare wheels and tyres shall be added.
12	Agreement regarding UN regulation	65	00	S7	2010/99	2011/7/7	2011/6/23	Special warning lights	Prescription of specifications of luminous intensity shall be transferred from the Annex to the main text.
13	Agreement regarding UN regulation	83	06		2009/57 +2009/57/corr.1	2011/3/14	2010/12/9	The emission of pollutants according to engine fuel requirements	Consideration of Euro5/Euro6 regulations in ECE regulation.
					2009/134	2011/3/14	2010/12/9
					2010/56	2011/3/14	2010/12/9
			06	C1	2010/137	2011/3/14	2010/12/9		Error correction.
			06	S1	2010/130	2011/7/7	2011/6/23		Revision of requirements for the blower with air velocity corresponding to vehicle velocity. for Type I test.
	Adopted proposal regarding UN regulation		06	S2	2011/56	2011/6/22			Revision of requirements for the blower with air velocity corresponding to vehicle velocity. for Type I test.
14	Agreement regarding UN regulation	91	00	S13	2010/101	2011/7/7	2011/6/23	Side-marker lamps	The Annex defining the extent of the trichromatic coordinates shall be deleted.
15	Agreement regarding UN regulation	94	02		2010/122	2011/7/7	2011/6/23	Protection of the occupants in the event of a frontal collision	Test Procedures for the protection of the occupants of vehicles operating on electrical power from high voltage and electrolyte spillage in a collision, together with relevant amendments, shall be added.
			R1	C1	2009/54	2008/3/20	2009/6/24		Error correction.
	Adopted proposal regarding UN regulation		02	C1	2011/69	2011/6/22			Error correction.
			02	S1	2011/55	2011/6/22			The caution label for air bag shall be changed.
16	Adopted proposal regarding UN regulation	95	03	C1	2011/70	2011/6/22		Protection of the occupants in the event of a lateral collision	Error correction.
17	Agreement regarding UN regulation	97	01	S6	2010/112	2011/7/7	2011/6/23	Vehicle alarm systems	Simplification of approval tests.
18	Agreement regarding UN regulation	116	00	S3	2010/115	2011/7/7	2011/6/23	Protection against unauthorized use	Mitigation regarding test items and clarification of test procedures.
19	Agreement regarding UN regulation	122	00	S2	2010/117	2011/7/7	2011/6/23	Heating system	A definition of an electric heater shall be added.

PAGETOP

---

Table of amended regulations (Aug. 2011).

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document *		Title	Description ** (To see the original document, click the text.)
	Name	#
1	Agreement regarding UN regulation	6	01	S16/C2	Direction indicators	Error correction.
			01	S18/C3		Error correction.
2	Agreement regarding UN regulation	7	02	S15/C1	Front and rear position(side)lamps, stop lamps and end-outline marker lamps	Error correction.
3	Agreement regarding UN regulation	19	R5	C1	Front fog lamps	Error correction.
			04	C1		Error correction.
4	Agreement regarding UN regulation	37	03	S34/C2	Filament lamps	Error correction.
5	Agreement regarding UN regulation	39	R1	C1	Speedometer	Error correction.
6	Agreement regarding UN regulation	43	R2	C1	Uniform provisions concerning the approval of safety glazing materials	Error correction.
7	Agreement regarding UN regulation	48	R6	C3	Installation of lights	Error correction.
			04	S5/C1		Error correction.
			05	C1		Error correction.
8	Agreement regarding UN regulation	70	01	S7/C1	Rear marking plates for heavy and long vehicles	Error correction.
9	Agreement regarding UN regulation	87	R2	C2	Daytime running lamps	Error correction.
10	Adopted proposal regarding UN regulation.	90	02		Replacement brake lining assemblies	Clarification of description with regard to test methods, rules, etc.
11	Agreement regarding UN regulation	98	01	C1	Gas-discharge headlamps	Error correction.
12	Agreement regarding UN regulation	107	02	S5/C1	Category m2 or m3 vehicles with regard to their general construction	Error correction.
13	Agreement regarding UN regulation	112	01	C1	Headlamps (with an asymmetrical passing beam)	Error correction.
14	Agreement regarding UN regulation	113	00	S9/C1	Headlamps (with a symmetrical passing beam)	Error correction.

PAGETOP

---

Table of amended regulations (Jul. 2011).

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document *		Title	Description** (To see the original document, click the text.)
	Name	#
1	Adopted proposal regarding UN regulation.	13	11	S6	Braking	Adoption of a requirement to enter the identification code of the original replacement parts in the certificate of approval just as prescribed in the rule for replacement drums/discs of R90.
			11	S7		1) Revision of conditions for activation of stop lamp regarding vehicles equipped with electric regenerative braking system and/or endurance braking system. 2) With regard to the alternative procedure for type approval of trailers application of the alternative procedure to verify ABS performance shall be extended to trailers with 4 or more axles.
2	Adopted proposal regarding UN regulation.	43	R2	C1	Uniform provisions concerning the approval of safety glazing materials	Error correction.
			00	S14		For vehicles provided with driver seat in the central driving position the test area A used for M1 and N1 vehicles shall additionally be applied.
			01			Transposition of the requirements of gtr.6 into ECE R.43.
3	Adopted proposal regarding UN regulation.	46	02	S5	Rear-view mirrors	Amendment to introduce the concept of "revision of approvals" into the application procedure for approval.
4	Agreement regarding UN regulation	51	02	C3	Noise	Error correction.
5	Adopted proposal regarding UN regulation.	87	R2	C2	Daytime running lamps	Error correction.
6	Adopted proposal regarding UN regulation.	107	02	S5 /C1	Category m2 or m3 vehicles with regard to their general construction	Error correction.
			03	S2		1) Vehicles of Classes I and A shall not have escape hatches fitted in the roof where technical components are installed which present possible dangers to passengers using the escape hatches. 2) The lower edges of the gangway mannequin shall be rounded off by R25.
			04			For vehicles of Classes I and A the vertical distance between the floor of the seating area and the adjacent gangway shall not be more than 250 mm.
7	Adopted proposal regarding UN regulation.	121	00	S5	The location and identification of hand controls,tell-tales and indicators	A symbol mark for the electronic stability control (including malfunction) shall be added.
8	Adopted proposal regarding UN regulation.	123	01	C2	AFS	Error correction.
			01	S1		1) The beam pattern of the new high beam with adjustable distribution shall be prescribed. 2) Light sources which can be used for AFS shall be prescribed. 3) The lighting cycle for the heat resistance test on AFS shall be revised. 4) The minimum luminous intensity requirements above the H-line shall be revised.

PAGETOP

---

Table of amended regulations (Jun. 2011).

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document *		Title	Description** (To see the original document, click the text.)
	Name	#
1	Adopted proposal regarding UN regulation.	6	01	S16/C2	Direction indicators	Error correction.
			01	S18/C3		Error correction.
2	Adopted proposal regarding UN regulation.	10	04		Radio interference suppression	Limitation for voltage changes, voltage fluctuations, etc. for the sake of EMC regarding the charger of electric vehicles.
3	Adopted proposal regarding UN regulation.	13-H	00	S12	Braking (m1)	Adoption of a requirement to enter the identification code of the original replacement parts in the certificate of approval just as prescribed in the rule for replacement drums/discs of R90.
4	Adopted proposal regarding UN regulation.	19	R5	C1	electric power train	Error correction.
			04	C1		Error correction.
			04	S1		It shall be prohibited to use a light source of which luminous intensity exceeds 2000 lumen for the Class B front fog lamp.
5	Adopted proposal regarding UN regulation.	39	R1	C1	Speedometer	Error correction.
6	Adopted proposal regarding UN regulation.	48	R6	C3	Installation of lights	Error correction.
			04	S5/C1		Error correction.
			05	C1		Error correction.
			04	S7		-Revision of requirements for the vertical angle of F3 front fog lamp of which liminous intensity does not exceed 2000 lumen. -In case of filament lamps for which more than one test voltage is specified, the objective flux which produces dipped beam shall be applied. -Permission of automatic transition from main beam to dipped beam and vice versa. -Permission of a main beam with variable luminous beam pattern.
7	Adopted proposal regarding UN regulation.	50	00	S15	Lights (moped, motor cycle)	Permission of amber colour for optional use for the front position lamp.
8	Adopted proposal regarding UN regulation.	53	01	S13	Installation of lights (motor cycle)	-Permission of amber colour for optional use for the front position lamp. -Permission of the front position lamp reciprocally incorporated in the front direction indicator lamp. -Permission of a tell-tale optional for the stop lamp.
9	Adopted proposal regarding UN regulation.	70	01	S7/C1	Rear marking plates for heavy and long vehicles	Error correction.
10	Adopted proposal regarding UN regulation.	98	01	C1	Gas-discharge headlamps	Error correction.
			01	S1		-Permission of using more than one LED module for the driving beam. -Adjustment with R123 regarding the maximum luminous intensity of 50 lux for lighting the ground surface, etc. of the lane for oncoming vehicles.
11	Agreement regarding UN regulation	100	01		Electric power train	-The scope shall be extended so as to apply for vehicles of M, N categories including those driven by hybrid, hydrogen, or fuel cell propulsion systems. -An overall revision of requirements for protection against direct contact, isolation resistance, other functions, etc.
12	Adopted proposal regarding UN regulation.	112	01	C1	Headlamps (with an asymmetrical passing beam)	Error correction.
			01	S1		Error correction.
13	Adopted proposal regarding UN regulation.	113	00	S9/C1	Headlamps(with a symmetrical passing beam)	Error correction.
14	Adopted proposal regarding UN regulation.	119	01	C1	Cornering lamps	Error correction.

PAGETOP

---

Table of amended regulations (May 2011).

*S: Amendment number, C: Error correction number.
**: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

	Document reference		Status of document *		Title	Description** (To see the original document, click the text.)
	Name	#
1	Agreement regarding UN regulation	7	02	S16	Front and rear position(side)lamps, stop lamps and end-outline marker lamps	For simplification of light distribution requirements, the same requirements shall be applied throughout one category of device, regardless of the number of light source(s) used.
2	Agreement regarding UN regulation		02	S17		Clarification: A light source module shall be so designed that it must not mechanically be interchangeable with any replaceable light source. -For adjustment with R48 a category name shall be added. -A marking rule for interdependent lamp shall be added after which an interdependent lamp system consisting of more than one interdependent lamps may be regarded as one lamp.
3	Adopted proposal regarding UN regulation.		02	S15/C1		Error correction.
			02	S19		Clarification that the rule to fulfil the minimum intensity requirements when one lamp fails shall be applied only to "D" lamps.
4	Agreement regarding UN regulation	12	R3	C4	Steering mechanism	Error correction.
5	Agreement regarding UN regulation	16	06	C2	Safety belts	Error correction.
6	Agreement regarding UN regulation	37	03	S32/C2	Filament lamps	Error correction.
7	Adopted proposal regarding UN regulation.		03	S34/C2		Error correction.
			03	S35/C2		Error correction.
			03	S36/C1		Error correction.
			03	S37		-In addition to the reference luminous flux at 13.2V a reference luminous flux 1650lm at 12.2V shall be included in the H9 data sheet. -9 bulbs shall be transferred from Group 2 to Group 3.
8	Agreement regarding UN regulation	44	R2	C4	Child restraint systems	Error correction.
9	Agreement regarding UN regulation	48	04	S4/C1	Installation of lights	Error correction.
			R6	C1		Error correction.
			R6	C2		Error correction.
			04	S3/C1		Error correction.
			04	S4		-Requirements for the fitting height of retro-reflectors as well as side retro-reflectors shall be moderated. -Fitting side direction indicator lamps of category 5, or 6 on vehicles exceeding 9 meters in length shall be permitted. -Requirements for fitting side retro-reflectors and side marker lamps on a passenger vehicle the length of which exceeds 6m but does not exceed 7m shall be moderated. -Requirements for fitting cornering lamps shall be moderated. -With regard to fitting retro-reflectors minimum distance requirements for adjacent retro-reflectors shall be moderated. -Understanding of "light emitting surface", "illuminating surface", etc. shall be additionally described.
			04	S5		In addition to type "D"lamps type "Y" Interdependent lamps shall be included.
			04	S6		-The maximum intensity of the main beam of the headlamp shall be revised. -Definition of, and rules regarding rear-end collision alert signal shall be added. -Detailed conditions for making DRL ON/OFF shall be added. -Revision of fitting rules according to addition of category names to R7. -Addition of COP-requirements regarding the class "F3" front fog lamps. -Fitting line conspicuity markings on the front of large trailers shall be allowed.
			05			When DRL is existing, automatic lighting of the passing beam of the headlamp at predetermined ambient luminous intensity shall be mandatory.
10	Agreement regarding UN regulation	51	02	S7	Noise	Addition of a definition of a silencing system using the absorbing fibrous material.
11	Adopted proposal regarding UN regulation.		02	C3		Error correction.
12	Agreement regarding UN regulation	55	01	S2	Mechanical coupling	Addition of requirements of secondary coupling for an unbraked O1 trailer and obligation of fitting relevant equipments.
13	Agreement regarding UN regulation	83	05	S7/C1	The emission of pollutants according to engine fuel requirements	Error correction.
14	Agreement regarding UN regulation	89	00	S2	Speed limitation devices	Addition of categories of vehicles which shall be equipped with SLD/SLF.
15	Agreement regarding UN regulation	124	00	S1	Wheels for passenger cars	-Extension of the scope. -Introduction of a wheel family concept, and, accordingly, the test on a representative product shall be prescribed. -Clarification of test methods: Repetitive torque test shall be abolished, impact test shall be carried out according to ISO 7141, with regard to material tests tensile strength test shall be added on aluminium as well as magnesium wheels, etc.
16	Agreement regarding UN regulation	125	00	C1	The forward field of vision	Error correction.

Table of amended regulations (Apr. 2011). *S: Amendment number, C: Error correction number. **: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers.

Document reference Status of document * Title Description** (To see the original document, click the text.) Name # 1 Agreement regarding UN regulation 50 00 S13 Lights (moped, motor cycle) Clarification: A light source module shall be so designed that it must not mechanically be interchangeable with any replaceable light source. 2 Agreement regarding UN regulation 53 01 S11 Installation of lights (motor cycle) -A headlamp equipped with a Horizontal inclination adjustment system (HIAS) shall be admitted. -In the case of two daytime running lamps, the distance separating the illuminating surfaces shall be changed so that they do not exceed 420 mm. 3 Agreement regarding UN regulation 77 00 S13 Parking lamps Clarification: A light source module shall be so designed that it must not mechanically be interchangeable with any replaceable light source. 5 Agreement regarding UN regulation 87 00 S15 Daytime running lamps Clarification: A light source module shall be so designed that it must not mechanically be interchangeable with any replaceable light source. 6 Agreement regarding UN regulation 91 00 S12 Side-marker lamps -Clarification: A light source module shall be so designed that it must not mechanically be interchangeable with any replaceable light source. -Addition of a column to application document to enter if the mounting height is equal to, or less than 750mm, etc. 7 Agreement regarding UN regulation 98 00 S13 Gas-discharge headlamps -Clear prescription of requirements for aging time. -It shall be clearly described that light sources with passing beam function only shall be exempted from testing. -A revision to prescribe lighting voltage in bundle for each light source category. 8 01 Lighting voltage of lamp at the type approval test shall be changed to 13.2V. 9 Agreement regarding UN regulation 99 00 S5 Gas-discharge light sources Selective yellow colour shall be introduced again in accordance with introduction of Class F3 front fog lamp. 10 00 S6 -It shall be clarified that the maximum outer dimensions shall be measured from the reference plane. -Drawings shall be corrected. -Measurement conditions of the relative luminance of the R Type shall be clearly described. -It shall be clarified that the gas discharge light source shall be of low UV type. 11 Agreement regarding UN regulation 101 00 S9 Emission of carbon dioxide and fuel consumption (passenger car) Addition of emission test procedure on vehicles equipped with more than one periodically regenerating systems. 12 01 Adjustment with EC-Directive. 13 Agreement regarding UN regulation 112 01 Headlamps (with an asymmetrical passing beam) Lighting voltage of lamp at the type approval test shall be changed from 12V to 13.2V. 14 Agreement regarding UN regulation 118 01 The burning behavior of materials used in the interior construction of certain categories of motor vehicles The capability of materials to repel fuel or lubricants shall be expressed in the title and the scope. 15 Agreement regarding UN regulation 119 00 S5 Cornering lamps Clarification: A light source module shall be so designed that it must not mechanically be interchangeable with any replaceable light source. PAGETOP

Table of amended regulations (Mar. 2011). *S: Amendment number, C: Error correction number. **: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers. Document reference Status of document * Title Description (To see the original document, click the text.)** Name # 1 Agreement regarding UN regulation 4 00 S15 REAR REGISTRATION PLATE LAMPS Clarification: A light source module shall be so designed that it must not mechanically be interchangeable with any replaceable light source. 2 Agreement regarding UN regulation 6 01 S20 DIRECTION INDICATORS Clarification: A light source module shall be so designed that it must not mechanically be interchangeable with any replaceable light source. S19 In order to simplify requirements for the luminous intensity, a unified set of requirements shall be applied regardless of the number of light sources. 3 Agreement regarding UN regulation 10 03 S1 RADIO INTERFERENCE SUPPRESSION The provisional rule effective till 4. November 2008 shall be deleted. 4 Adopted proposal regarding UN regulation. 13 11 S4/C1 BRAKING Error correction. 5 Agreement regarding UN regulation 13H 00 S10 BRAKING (M1) Clarification of requirements for emergency braking signal. 6 Adopted proposal regarding UN regulation. 16 06 S1 SAFETY BELTS -Amendment of transitional rules. -A revision to admit a red warning lamp which is put off when occupant(s) use(s) the seat belt. 06 C2 Error correction. 7 Adopted proposal regarding UN regulation. 23 00 S17 REVERSING LAMPS A revision regarding measurement procedure of colorimetric characteristics. Agreement regarding UN regulation 00 S16 Clarification: A light source module shall be so designed that it must not mechanically be interchangeable with any replaceable light source. 8 Agreement regarding UN regulation 38 00 S15 REAR FOG LAMPS Clarification: A light source module shall be so designed that it must not mechanically be interchangeable with any replaceable light source. 9 Agreement regarding UN regulation 43 00 S13 UNIFORM PROVISIONS CONCERNING THE APPROVAL OF SAFETY GLAZING MATERIALS Clarification of the scope. 10 Adopted proposal regarding UN regulation. 44 R2 C4 CHILD RESTRAINT SYSTEMS Error correction. 11 Adopted proposal regarding UN regulation. 48 R6 C1 INSTALLATION OF LIGHTS Error correction. R6 C2 Error correction. 04 S4/C1 Error correction. 12 Adopted proposal regarding UN regulation. 49 05 S4 DIESEL EMISSION Addition of a particle number test method including measurement at periodic regeneration. 13 Agreement regarding UN regulation 64 02 TEMPORARY SPARE TYRES Error correction. 02 C1 14 Adopted proposal regarding UN regulation. 65 00 S7 SPECIAL WARNING LIGHTS The sentences in the Annex to be referred to regarding the photometric specifications shall be replaced with those in the main text. 15 Adopted proposal regarding UN regulation. 83 05 S10 THE EMISSION OF POLLUTANTS ACCORDING TO ENGINE FUEL REQUIREMENTS The allowable limits for Type IV test shall be revised. Requirements for cooling fan with air velocity corresponding to vehicle velocity shall be revised as well. 06 S1 Revision of requirements for the fan with air velocity corresponding to vehicle velocity. for Type I test. (Revision of different series from above.) 05 S7/C1 Error correction. 06 C1 Error correction. 16 Adopted proposal regarding UN regulation. 97 01 S6 VEHICLE ALARM SYSTEMS Simplification of the test procedure for approval. 17 Adopted proposal regarding UN regulation. 103 00 S3 REPLACEMENT CATALYTIC CONVERTERS -Addition of rules regarding periodically regenerating pollution control system. -Renewal of the definition of replacement pollution control devices. 18 Adopted proposal regarding UN regulation. 105 05 THE CARRIAGE OF DANGEROUS GOODS WITH REGARD TO THEIR SPECIFIC CONSTRUCTIONAL FEATURES Harmonization with EC regulation regarding international transportation of dangerous products. 19 Adopted proposal regarding UN regulation. 107 02 S7 CATEGORY M2 OR M3 VEHICLES WITH REGARD TO THEIR GENERAL CONSTRUCTION Revision regarding the size of passenger area as an influence factor for door layout. Agreement regarding UN regulation Erratum Error correction. 03 Addition of transitional rules to the 03 series of amendments. 02 S6 -Revision regarding the opening size of emergency window and escape hatch. -Revision of transitional rules. 03 S1 -Clarification of the definition of floor and deck. -Clear description of the step height. 20 Agreement regarding UN regulation 113 00 S9 HEADLAMPS (WITH A SYMMETRICAL PASSING BEAM) -Clear definition of aging time. -A revision to prescribe lighting voltage in bundle for each light source category. 21 Agreement regarding UN regulation 115 00 S4 LPG/CNG Retrofit System Revision of test methods for specific LPG retrofit system and specific CNG retrofit system. 22 Adopted proposal regarding UN regulation. 117 02 C1 THE APPROVAL OF TYRES WITH REGARD TO ROLLING SOUND EMISSIONS Error correction. 23 Adopted proposal regarding UN regulation. 121 00 S4 THE LOCATION AND IDENTIFICATION OF HAND CONTROLS,TELL-TALES AND INDICATORS Concerning the ISO regulation to be referred to regarding identification symbol of controls, tell-tales and indicators, the current regulation shall be replaced with one of a later year of issue. 24 Adopted proposal regarding UN regulation. 122 00 S2 HEATING SYSTEM Addition of a definition of electric heater. 25 Adopted proposal regarding UN regulation. 125 00 C1 THE FORWARD FIELD OF VISION Error correction. Agreement regarding UN regulation 00 S2 Clear definition of the position of adjustable steering wheel for visibility measurement. S3 Introduction of a definition of the area "S". PAGETOP

Table of amended regulations (Feb. 2011). *S: Amendment number, C: Error correction number. **: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers. Document reference Status of document * Title Description (To see the original document, click the text.)** Name # 1 Adopted proposal regarding UN regulation. 3 02 S12 REFLEX REFLECTORS Error correction. 2 Adopted proposal regarding UN regulation. 6 01 S21 DIRECTION INDICATORS The Annex prescribing the limits of trichromatic coordinates shall be deleted. 3 Adopted proposal regarding UN regulation. 7 02 S18 FRONT AND REAR POSITION(SIDE)LAMPS, STOP LAMPS AND END-OUTLINE MARKER LAMPS The Annex prescribing the limits of trichromatic coordinates shall be deleted. 4 Adopted proposal regarding UN regulation. 12 04 STEERING MECHANISM Test Procedures for the protection of the occupants of vehicles operating on electrical power from high voltage and electrolyte spillage in a frontal collision, together with relevant amendments, shall be added. R3 C4 Error correction. 5 Agreement regarding UN regulation 19 Erratum FRONT FOG LAMPS Error correction. 6 Agreement regarding UN regulation 27 Erratum WARNING TRIANGLES Error correction. 7 Agreement regarding UN regulation 37 03 S34 FILAMENT LAMPS -The measuring method of bulb colour shall be clarified. Accordingly, remarks shall be added to the communication form and COP requirements shall be changed. -Addition of new lamps. 03 S34/C1 Error correction. Erratum Error correction. Adopted proposal regarding UN regulation. 03 S36 -Adoption of H16B lamps. 03 S32/C1 Error correction. 03 S35/C1 Error correction. 8 Adopted proposal regarding UN regulation. 50 00 S14 LIGHTS (MOPED, MOTOR CYCLE) -The Annex prescribing the limits of trichromatic coordinates shall be deleted. -It shall be permitted to use a light source with single filament for more than one function by means of changing luminous intensity through control gear. 9 Adopted proposal regarding UN regulation. 53 01 S12 INSTALLATION OF LIGHTS (MOTOR CYCLE) -Requirements for reciprocal incorporation prescribed in R48 shall be added. -Prescription of the electric connection for DRL shall be revised. -The rule prohibiting "head lamp and other function in one" shall be deleted. -The rule prohibiting "direction indicator lamp and other function in one" as well as "reciprocal incorporation regarding direction indicator lamp" shall be deleted. 10 Adopted proposal regarding UN regulation. 77 00 S14 PARKING LAMPS -The Annex prescribing the limits of trichromatic coordinates shall be deleted. 11 Adopted proposal regarding UN regulation. 91 00 S13 SIDE-MARKER LAMPS -The Annex prescribing the limits of trichromatic coordinates shall be deleted. 12 Adopted proposal regarding UN regulation. 94 02 PROTECTION OF THE OCCUPANTS IN THE EVENT OF A FRONTAL COLLISION Test Procedures for the protection of the occupants of vehicles operating on electrical power from high voltage and electrolyte spillage in a frontal collision, together with relevant amendments, shall be added. 13 Adopted proposal regarding UN regulation. 95 03 PROTECTION OF THE OCCUPANTS IN THE EVENT OF A LATERAL COLLISION Test Procedures for the protection of the occupants of vehicles operating on electrical power from high voltage and electrolyte spillage in a frontal collision, together with relevant amendments, shall be added. 14 Agreement regarding UN regulation 98 Erratum GAS-DISCHARGE HEADLAMPS Error correction. 15 Agreement regarding UN regulation 104 Erratum RETRO-REFLECTIVE MARKINGSFOR HEAVY AND LONG VEHICLES Error correction. 16 Agreement regarding UN regulation 112 00 S8/C2 HEADLAMPS (WITH AN ASYMMETRICAL PASSING BEAM) Error correction. S8/C3 Error correction. S11 Introduction of terms with regard to passing beam. S12 A revision to prescribe lighting voltage in bundle for each light source category. 17 Adopted proposal regarding UN regulation. 116 00 S3 PROTECTION AGAINST UNAUTHORIZED USE Mitigation oftest items and clarification of test procedure. 18 Adopted proposal regarding UN regulation. 119 01 CORNERING LAMPS -Clear prescription of test voltage for each bulb category. -Revision of intensity of the light emitted. 19 Adopted proposal regarding UN regulation. 123 01 C1 AFS Error correction. PAGETOP

Table of amended regulations (Jan. 2011). *S: Amendment number, C: Error correction number. **: If you can't download the PDF file, please try with different browsers including Internet Explorer. Downloading problems have been reported for some browsers. Document reference Status of document * Title Description (To see the original document, click the text.)** Name # 1 Agreement regarding UN regulation 48 04 S3/C2 INSTALLATION OF LIGHTS Error correction. 2 Agreement regarding UN regulation 78 03 C2 BRAKING (CATEGORY L) Error correction. 3 Adopted proposal regarding UN regulation. 83 06 corrigendum THE EMISSION OF POLLUTANTS ACCORDING TO ENGINE FUEL REQUIREMENTS Error correction. 06 Consideration of Euro5/Euro6 for EC regulation. ECE-TRANS-WP29-2009-57e.pdf ECE-TRANS-WP29-2009-134e.pdf ECE-TRANS-WP29-2010-56e.pdf 06 06 4 Agreement regarding UN regulation 90 R2 C1 REPLACEMENT BRAKE LINING ASSEMBLIES Error correction. 5 Agreement regarding UN regulation 108 Erratum RETREADED PNEUMATIC TYRE （MOTOR VEHICLE） Error correction. 6 Agreement regarding UN regulation 121 Erratum THE LOCATION AND IDENTIFICATION OF HAND CONTROLS,TELL-TALES AND INDICATORS Error correction.